Repository navigation
Releases
Blockshot 0.6.0: swap a person in a clip, edit any frame, and everything is free
Blockshot 0.6.0
Swap a person in a clip, edit buttons on every frame, a Tools page, Looks, new take modes, and everything is free for everyone.
Everything is free
Every feature is open to everyone on a fresh install. No key is needed. Your existing key keeps working and changes nothing.
What is new
-
The cut can now close on an end card: pick none, the "Made with Blockshot" card, or a card with your film's title. It holds for 3 seconds. A music file and its loudness are set per cut as well, and the music fades in and out under the film.
-
New Tools page in the top menu, free for everyone, everything runs on your own PC: a Captioner (one caption text file per picture, written by a vision model you already run in LM Studio or Ollama; if you have none it tells you which kind to load), a Media Shrinker (smaller copies of a folder of pictures and videos in a new folder, your originals are never touched, with progress, Cancel and Retry), and a Prompt Studio (type a few words, get a rich picture prompt and a video prompt from your own Writer, with copy buttons).
-
Every frame now has an "Edit this frame" row: New angle, Next shot, Keep this face, Change a detail, More real and Guide picture. Each button draws a new version of the frame and never writes over the old one. A strip of small pictures under the frame lets you pick any version, and Undo goes back one step. While it works you can Cancel; if it fails you can Try again. The buttons are grey, with the reason, until the edit files are on your PC.
-
A third Picture preset, "Cast portrait", draws a frame from the portrait of the person in it so the face stays the same. A frame with no portrait is drawn the usual way. The edit files are large and are not hosted by us: the Models step links to their pages and checks the folder you saved them in.
-
Takes now come in three modes, picked in the Takes section: Normal, Turbo draft and From pictures. Turbo draft is a fast, rougher take for checking a shot before you spend a long render on it. From pictures builds a take from the portraits of the people in the shot, the set picture and the shot's frame, so it works even before any frame is kept; each picture is named in the prompt, so the film knows who is who. Each mode uses its own workflow and its own model files, and the Takes section says which file is missing if one is.
-
A take can now end on a picture you choose. Open "Edit this frame" on a shot and press "Use as end frame": the take of the shot before it will finish on this frame, which makes cuts between shots line up. Press it again to clear it. New installs get this in the standard take workflow; an install that already has the older workflow keeps it until you re-add the starter.
-
New: Swap a person in a clip, on every board and open to everyone. Pick a clip of up to 10 seconds and one picture of the new person, then press Start. If the clip shows several people, they are outlined and numbered so you can pick the one to swap; if there is only one, you are not asked. A progress card shows the five steps and the time left, and you can Cancel at any time. By default the new first picture is shown to you before the long part starts, so you can Continue, Redo or Cancel. When it is done the new clip sits next to the original with Play, Keep and Discard, and a small text file beside it lists what was done and any part that needs a closer look. Everything outside the person is kept from the original, and the original sound is kept. It needs large model files that are not hosted by us; the button is grey, with the reason, until they are on your PC. A quick note on use: use only clips and pictures you have the right to use, and label the result as made by software.
-
The swap draws sharper faces: Standard quality is the default, with more drawing steps and a gentle sharpen before the person is put back (it takes longer than before; the time shown on the card is updated). If the new first picture keeps the old trousers or shoes instead of the new person's, it is drawn again, up to three times, and a note says so if it still did not carry over.
-
Looks: every board now has a Look in its Brief. Pick one of six film looks (Clean daylight, Warm film stock, Cold thriller, Grainy analog, Soft dreamy, High contrast noir) and every picture on that board is drawn in that style, with a matching list of things to keep out. Pick Custom and the board uses your own house style from Settings again; your own words are never changed or lost when you try a look. Nothing to download. Later, look packs can add more looks, and a look can name an extra style file that is used only if you have it.
-
Looks can also name a LoRA style file and their own steps and strength. The LoRA is used only for pictures and only if you have the file in ComfyUI.
Also in this version
- Everything from 0.5.2 (the clearer "port is busy" message).
- Fixed: nine small rough edges found while testing, and the Setup step for the Wan file.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.6.0.exe |
Windows installer, for your user only, no admin — 98,498,585 bytes, sha256 46dd41f13257736e3d35c1a51c58810788239f6ec2343b031107d10193f2c9d8 |
Blockshot-0.6.0-portable.zip |
Windows, unzip anywhere and double-click Blockshot.cmd — 129,728,929 bytes, sha256 f9c4d5610eb83bce7b99219db45832f2aa65170cc71f2f716b3ec8dce492e788 |
Blockshot-0.6.0-linux-x64.tar.gz |
Linux 64-bit, run ./Blockshot/blockshot.sh — 117,735,206 bytes, sha256 7f43ba008595491887ffaf4556a10251bd5ca3818c8eb4f5fc79c609a8349b70 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot first: right-click the icon near the clock and choose Quit.
Blockshot 0.5.1 — the normal start works again, and a first Linux version
Blockshot 0.5.1
A small fix, and a first Linux version. In 0.5.0, a double-click on the Blockshot shortcut or on
Blockshot.cmd did nothing.
Fixed: the normal start did nothing
The shortcut and Blockshot.cmd start Blockshot quietly, with only an icon near the clock and no black
window. In 0.5.0 that quiet start closed again in under a second, before it could show a message. So
nothing opened and nothing said why.
It starts again now. The icon comes back near the clock and the board opens in your browser.
If you used a .bat with python\python.exe -m blockshot to get round it, you can go back to the normal
shortcut. The .bat still works too.
Thanks to Lou for reporting it, and for guessing the right cause.
New: Blockshot for Linux (first version)
SpyGut asked for it, so here it is. One download for 64-bit Linux, with Python inside. Tested on Ubuntu 24.04.
- Unpack it:
tar -xzf Blockshot-0.5.1-linux-x64.tar.gz - Start it:
./Blockshot/blockshot.sh - The board opens in your browser. Ctrl+C in the terminal stops it.
Install ffmpeg for takes and cuts: sudo apt install ffmpeg.
Not in the Linux version yet:
- The icon near the clock. Blockshot runs in its terminal window instead.
- The built-in Writer. Run LM Studio or Ollama and put its address in Settings > Writer.
Tell us what breaks. Linux is new for Blockshot.
Nothing else changed
No other new features. Your boards, settings and key stay where they are.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.5.1.exe |
Windows installer, for your user only, no admin — 97,350,153 bytes, sha256 3ad8e46af31cb4d413f3a37c74406e362d12b39db2fb5e477631e1591c7b9f03 |
Blockshot-0.5.1-portable.zip |
Windows, unzip anywhere and double-click Blockshot.cmd — 127,498,817 bytes, sha256 c1bc35d227c5ce9d086fa21a133003a5bf22ea6854eebd9029195cbf48a094d3 |
Blockshot-0.5.1-linux-x64.tar.gz |
Linux, 64-bit — 117,590,253 bytes, sha256 ae0cd83da2d22e9272b51a0a99e1c161e68dca055b6718a57e6fbfa78ba35666 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot first. In 0.5.0 it may not be running at all; if it is, right-click the icon near
the clock and choose Quit.
Blockshot 0.5.0 — one MiniMax H3 take of 40 seconds, two upscales, and the word and time helper
One shot can now run for 40 seconds. Two ways to upscale it, a fast one and a detailed one. And a small
helper that tells you when a shot's words and its seconds do not match.
Long Take: one shot up to 40 seconds
Set a shot's Seconds above 15 and it becomes a Long Take. The field now goes up to 40. Blockshot picks
the SY Long Take (MiniMax H3) workflow for it by itself, with its voice and sound, like any other take.
A Long Take rolls at a small size, then you upscale it. That is on purpose: at a small size the person on
screen keeps the same face and the same look from the first second to the last. You pick the size under
Settings → Workflows → Long Take size:
- Clear, 736 x 416 (the default). The steadiest face in our tests. A 40 second take rolled in about
22 minutes on our test card. - Quick, 672 x 384. A good face, about 16 minutes for the same take.
- Fine, 768 x 448. A little more detail than Clear, about 24 minutes.
We rolled the same 40 second shot at five sizes and measured the face in each. Below 384 the face started to
blur and change shape in a close-up, so we left the smaller size out.
MiniMax H3 speed
MiniMax H3 takes now roll with a speed file. PDMD at 4 steps is on from the start: our 40 second take rolled
in about 4 minutes at Quick, against 16 with the slow 20 steps. Slow (20 steps) is still there to pick under
Settings → Workflows → MiniMax H3 speed, next to other speed files and any turbo LoRA you have, with your
own steps, sampler and shift. Until the PDMD file is in your ComfyUI models/loras folder, takes roll Slow,
and the card shows where to get the file. It works with any MiniMax H3 model file, the smaller fp8 and NVFP4
files too.
Upscale: Fast or Detail
Every take on the Takes screen now has two upscale buttons. There are also Fast upscale all and
Detail upscale all for the whole board.
- Fast upscale uses the NVIDIA RTX video upscaler. A 40 second take went from 736 x 416 to
1920 x 1088 in about 3 minutes on our test card. It needs an NVIDIA RTX card and thenvidia-vfx
package in ComfyUI. If that package is missing, Blockshot says so in plain words and tells you what to
install. It does not fail with a code. - Detail upscale uses SeedVR2. It draws real detail: hair, teeth, eyes. It is slow, about 45 minutes for
a 40 second take on our test card, so Blockshot asks first and shows its time guess before it starts. - After a Fast upscale the take shows Add detail. That starts again from the small take, not from the
fast copy, so nothing is upscaled twice.
Both work in short pieces of about 5 seconds that overlap and are joined with a soft blend, so the film
does not jump where two pieces meet. We checked every join on a 40 second take. The take's own sound is
kept. If an upscale stops half way, the next run carries on from the last finished piece.
A new upscale never writes over an older one. The fast copy and the detailed copy sit side by side, so you
can compare them.
The word and time helper
A talking shot needs about the right number of words for its seconds. Too few, and the speaker fills the
gap with words of their own. Too many, and the speaker rushes or drops words.
Each shot with spoken lines now shows a note under its Seconds field:
- "22 words for 10 s. That fits (19 to 30 words)." in green, or
- "Too many words: 40 for 10 s. Cut about 10 words or make the shot 16 s." in amber.
The Use N s button sets the seconds that fit the words in one click. The shot card on the board also
gets a small warning mark, so you can see which shots need a look without opening each one.
The helper counts about 2.5 words a second. Short shots keep 2 seconds of quiet for a breath. A Long Take
does not.
Fixed
A second roll of the same shot with the same seed wrote over the first take's file. Both takes then
showed the newer film. Each roll now gets its own file, so an older take stays as it was.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.5.0.exe |
the installer, for your user only, no admin — 97,343,746 bytes, sha256 3207abac8e042f11f6e1ae607722bc32d1c1fc2cab6bef1b84814fe27c6bdc20 |
Blockshot-0.5.0-portable.zip |
unzip anywhere and double-click Blockshot.cmd — 127,497,769 bytes, sha256 b13380062cd8150dd8e1b5a3209b0cdd8e9dbd10e07825c2cebd559c27f5d993 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.
Blockshot 0.4.3 — music under the cut, and cuts on the beat
Music under the cut, with the cuts landing on the beat. Plus the setup wizard no longer shows a red error
for a file nobody needs.
Put a song under your film
There is a new Music under the cut card below the Cut section. Give it a song from your PC and every
cut you make from then on carries it: mixed under the takes' own sound, looped if the film runs longer than
the song, faded in at the start and out at the end.
A slider sets how loud the music sits. The house setting is -18 dB, which is quiet enough to talk over. The
song lives on the board, so you pick it once and every later cut uses it.
Blockshot can hear the beat
Press Listen for the beat and Blockshot reads the song and tells you its tempo — "Heard 128 beats a
minute in dusk-drive.mp3, 340 beats over 2:39". That number is the check: if it matches what you hear, the
next setting will work.
Cut on the beat then moves every cut onto a beat. Pick every beat, every 2 beats, every bar, or every
2 bars. A shot is only ever shortened to reach a beat, never stretched, so nobody in your film starts
talking slowly. A shot the beat cannot reach keeps the length you gave it.
Music with no clear pulse — a drone, a field recording, a piano ballad with loose timing — comes back as
"no steady beat found in this music". The song still plays under the film. Only the beat cutting is off.
None of this needs a new download. Blockshot reads the song with the ffmpeg it already ships.
Setup step 7: no more red error for the Wan file
Step 7 of the wizard checked every workflow, including the optional silent-video one, and showed
"model file not found: unet_name = wan2.2_ti2v_5B_fp16.safetensors" in red. Members read that as a
failure and went looking for a large file they do not need. The talking-video engine has been the house
default since 0.4.1.
The wizard now checks only the workflow you will actually use. Any other workflow that is missing a file
shows a grey line saying Pro, optional — check later in Settings, in the wizard and in Settings alike.
Thanks to nightkillers101 for reporting it.
What is not in this one
A reference-picture preset, meant to keep a face the same from shot to shot, was built and then held back.
Three test renders on a real card showed it copies the cast portrait instead of using it as a likeness: a
frame prompt naming a rooftop at dusk with a city skyline came back as the portrait again, right face and
no scene. It also needs a proper stand-in for shots that have no portrait yet. The work is kept and the
findings are written down, so it comes back when it draws the scene you asked for.
The full write-up, with what to set and what these settings will not do: https://forgebun.com/go/bs_film
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.4.3.exe |
the installer, for your user only, no admin — 97,330,232 bytes, sha256 43ea0d87390325f36de51c029e40667734d99930218093233878af8554e320d2 |
Blockshot-0.4.3-portable.zip |
unzip anywhere and double-click Blockshot.cmd — 127,464,398 bytes, sha256 414ebbda48a6e742d6b8b56ce72ec06b5ed15b639a575441d08d63116bd6d040 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.
Blockshot 0.4.2 — the ComfyUI folder fix, and five things found before launch
A beta tester could not download the model pack, and a pre-launch check of the whole app found four more
things worth closing before it goes out to strangers.
The ComfyUI folder: type either one
Blockshot wanted the folder that holds models\. A tester typed the models\ folder itself, the wizard
took it without a word, and the model pack then refused every download with "the ComfyUI folder is not
set" — which was not even true. It was set. It was the other half.
Now Blockshot works it out from whatever you type: the ComfyUI folder, its models\ folder, or the folder
above the install. Find it also recognises ComfyUI Desktop, portable bundles and launcher installs,
which have no main.py beside their models and used to be missed. And the Painter card now says plainly,
in green or red, whether Blockshot can see the folder you gave it — before you reach the download step.
If a folder still is not one Blockshot knows, the message names the folder you typed and says what is
missing, instead of claiming nothing was set.
The Writer picks a model rather than failing
Skipping the Writer step in the wizard is allowed. Pressing Write afterwards used to hand back the
model server's own words — "Multiple models are loaded. Please specify a model" — which name no button
in this app. Blockshot now chooses a chat model for you, remembers it, and carries on. If it truly cannot,
the message tells you which two clicks fix it.
Three doors closed before the launch
- Only this PC may talk to the engine. Blockshot listens on your own machine, and a page from another
site was already refused. But a browser sends no site name at all on some requests, so a website that
pointed its own name at your PC could have slipped past and read your boards. The engine now also checks
the name every request arrives under. - Pro cannot be switched on with a setting. A developer switch used by our own tests could turn Pro on
in a shipped copy. Shipped builds now ignore it. - Your key stops at Stable Yogi. A model download bounces from Stable Yogi to the storage that holds
the file. Your member key was travelling on that second hop. It no longer leaves our own address.
Two more things the pre-launch check turned up
- The app no longer fetches its fonts from Google on every page load. They ship inside Blockshot and
always did; the web call was a leftover from the mock-ups. Blockshot now looks right with no internet. - The news card can be switched off. Once a day Blockshot asks Stable Yogi whether there is a new pack
or guide. That is the only thing it does without being pressed, and there is now a tick box for it under
Settings → Storage. Off means nothing leaves this PC unless you press something.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.4.2.exe |
the installer, for your user only, no admin — 97,312,664 bytes, sha256 814828428e05f59c7e0a4eed989d311f8c0576cbb03c15f20765f9719d94f74e |
Blockshot-0.4.2-portable.zip |
unzip anywhere and double-click Blockshot.cmd — 127,449,412 bytes, sha256 631628524d1c3caa7c089d52acd8977ebd9c06aefb2fe0807abea665d107cf80 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.
Blockshot 0.4.1 — the takes speak, and the Writer writes for it
A fix release from one afternoon of testing a talking crow. Four things were quietly wrong. All four
are fixed.
The takes now speak
Blockshot has two video engines. One speaks every line out loud, with sound. The other gives silent
motion. The silent one was the default, so every take came out without a voice and nobody was told why.
The speaking engine is now the default for takes. Under Settings → Workflows each video engine says
plainly what it does: "Speaks every line out loud, with sound" or "Silent motion, no voice". If you
had already rolled takes, nothing is changed behind your back; pick the speaking one there when you want it.
The Writer now writes for a video that talks
- Every person gets a Voice — how they sound — and every place gets a Sound — what you hear there.
The Writer fills them in, you can edit them on the cast and set cards, and every take is told both. A crow
king now speaks in a hoarse, croaky voice in a room with a bare echo, instead of in whatever the engine
guessed. - The Writer no longer narrates a line it also speaks. "He squawks that he wants a nap" plus the line
"I need a nap" was two instructions for one beak. The action now says what we see; the line says what
we hear. - Every take asks for no subtitles and no on-screen text. The speaking engine draws text readily, and a
spoken line without that rule can come back with captions burned into the picture. - A take is never shorter than the speaking engine was trained for. A 3-second shot used to ask it for
something it had never seen; it is now lifted to 5 seconds on its own.
The Writer picks a real writing model
If you had not chosen a model, the app took the first one your server listed. On a PC with many models
that could be a picture-caption model — which describes pictures and cannot plan a film. The app now
picks a chat model for you and tells you which one, and it warns if the model you chose looks like a
captioner, a vision model or a code model.
The Writer keeps a place's sound steady
A place's Sound is the background you hear in every shot set there. The Writer no longer puts a one-off
event in it — a crash of glass from shot 1 was playing under shot 3. Events belong to a shot's action.
The disk brake is 2 GB, not 20
Drawing paused when free disk fell below 20 GB. That was a wall, not a brake. It is 2 GB now — enough to
keep your boards safe on a full disk — and you can change it under Settings.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.4.1.exe |
the installer, for your user only, no admin — 97,314,874 bytes, sha256 21440dcfd42e9c248f11c69541d33931e00a764995044259f32ca4e9ac797142 |
Blockshot-0.4.1-portable.zip |
unzip anywhere and double-click Blockshot.cmd — 127,442,116 bytes, sha256 0ae2f53bffa4e52463d05db2ab1caaeb447ece0745c597d727790e99278b3e21 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.
Blockshot 0.4.0 — no Civitai key, pick the models you already have
Two things got in the way of a first run. Both are gone.
No Civitai account. No key. Nothing to sign up for.
The picture model used to come from Civitai, so you had to make an account there, find your API key and
paste it into Blockshot before anything would download. If you live somewhere that cannot reach that
site, you were simply stuck.
The model now comes from Stable Yogi itself. Press Get the pack and it downloads. That is the whole
step. The Civitai key box is gone from Settings, and nothing asks you for it again.
Already downloaded the model the old way? Keep it. Blockshot still recognises your copy and will not
make you fetch 13 GB a second time.
Already have your own model files? Pick them from a list
If you already use Krea 2 — the model, the text encoder, the VAE — you do not need our pack at all.
Open Settings → Workflows, press Model files on a workflow, and choose what you want. Each line
is a drop-down of everything ComfyUI can see: your files, under your names, on whichever drive they live.
Nothing is downloaded, and nothing is renamed.
This is also the fix when a first run complains that a model file is missing. The list shows what the
workflow is asking for and what your ComfyUI actually has, side by side, so you can point it at the
right file yourself in one click.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.4.0.exe |
the installer, for your user only, no admin — 97,303,112 bytes, sha256 3cf6dfaaa592e6555efbc68b9ff98a582a4d3d14b1e0d7ea053b8adf14c13984 |
Blockshot-0.4.0-portable.zip |
unzip anywhere and double-click Blockshot.cmd — 127,438,119 bytes, sha256 599b2a03abdfa06f0a376fd0155a50551eea413ee545eb84554f071a9de86df2 |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed
yet: More info → Run anyway.
Close the old Blockshot from the tray icon first. Your boards, settings and key stay where they are.
Blockshot 0.3.1 — close the old copy first
A fix release, from one member's report. Thank you for it.
If 0.3.0 looked like it was missing the new button, this is why
Your old copy was still running. Blockshot lives in the tray, so installing a new version does not close the
old one, and the launcher quietly opened your browser on the old engine instead. You were looking at the old
app the whole time and had no way to tell.
Two things fix that:
- Starting a new version while an old one is running now stops and tells you. It says which version is
running, which one you tried to start, and how to close the old one: right-click the Blockshot icon near the
clock and choose Quit. It no longer hands you back to the old app without a word. - The version is now shown in the app, right next to the Blockshot name at the top. One glance tells you
which build you are on.
If you are on 0.3.0 or older right now: close Blockshot from the tray icon first, then install this one.
The LM Studio error now says what it means
If you saw this:
No LM Runtime found for model format 'torchSafetensors'
it means one thing only: LM Studio was given a picture model. Blockshot now says that in plain words and
tells you the two ways out — put LM Studio's models folder back to its own default and download a chat model,
or press Set it up for me and let Blockshot bring its own writing model.
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.3.1.exe |
the installer, for your user only, no admin |
Blockshot-0.3.1-portable.zip |
unzip anywhere and double-click Blockshot.cmd |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed yet:
More info → Run anyway.
Close the old Blockshot from the tray first. Your boards, settings and key stay where they are.
Blockshot 0.3.0 — it can write on its own now
Blockshot can now write on its own
Before this, you had to install a second app before Blockshot could write anything. Not any more.
Open Settings → Writer and press Set it up for me. Blockshot downloads its own writing model, about
2.5 GB, and runs it for you. That is the whole setup. It starts and stops with the app, and Remove on the
same card gives the space back whenever you want.
Already using LM Studio or Ollama? Keep using them. The app now finds them by itself and there is a
button for each, so there is no address to type.
Also in this build
- The setup screen now tells you plainly that the writing model is its own download, and that the picture
models in your ComfyUI folder cannot write. That tripped people up. - When nothing answers, the app says what is really wrong instead of blaming the address.
- New guides on the portal: how to give Blockshot a writing model, and step-by-step setup for LM Studio and
for Ollama. https://forgebun.com/go/bs_learn
Get it
| File | What it is |
|---|---|
Blockshot-Setup-0.3.0.exe |
the installer, for your user only, no admin |
Blockshot-0.3.0-portable.zip |
unzip anywhere and double-click Blockshot.cmd |
Each file has its .sha256 next to it. Windows shows its blue box once because the file is not signed yet:
More info → Run anyway.
Already have Blockshot? Install over the top. Your boards, settings and key stay where they are.
Blockshot 0.2.1
Blockshot 0.2.1
Files (next to their .sha256):
Blockshot-Setup-0.2.1.exe— sha256acea74e3249269061255b5d92249c4f6117304688953b142a426db0357285478Blockshot-0.2.1-portable.zip— sha256509b916fc9ee53b47b1a52df09550be277490ef4d59d32f4a7f93bd475e20e23
A newer setup replaces 0.2.0 in place; your boards and settings stay.
What changed
- The launch: while the launch window is open on the portal, any Blockshot key switches Pro on — a free account's
key too. The Licence card and the Takes section say so. No date lives in the app; the portal decides. - News: a card under the top bar when there is something to tell — a pack, a guide, the launch. Close it once, it
stays closed. The app asks the portal once a day; nothing about your PC is sent. - Free cuts end on a "Made with Blockshot" card. Pro cuts don't, unless asked.
- "Post it" on a cut: a caption with #blockshot to your clipboard, the Civitai post page, the folder with the film.
- The example board is now the showcase film "Marry Me, Maybe": twelve shots with their lines, the cast and sets, the frames, and
the finished film on the board. A "Lessons" button opens the portal lessons. - Clean files: every picture and video the app makes is written without the maker's data (no prompt, no model names, no seeds
inside the file). Files from earlier builds are cleaned once at the next start. - One app, two picture presets: Fast (8 steps) and Extended (12 steps, CFG 1.5, the negative prompt works) — one
click under Settings → Workflows.