Repository navigation
https://www.stereolabs.com/developers/release/5.5
5.5.1
SDK
Bug Fixes
- Fixed SVO playback stopping early on Jetson:
grab()returnedERROR_CODE::END_OF_SVOFILE_REACHEDbefore the end of the recording, at a different frame on every run. Most visible with several cameras played back at once and with ZED X One recordings. - Fixed SVO recordings on Jetson losing their last frames: one or two in SVO2 with ZED X and ZED X One cameras, and up to six in legacy SVO (
ZED_SDK_SVO_VERSION=1).disableRecording()also returns about 300 ms sooner. - Fixed
InitParameters::optional_settings_pathbeing silently ignored when the path had no trailing separator (/my/settingswas read as/my/settingsSN12345.conf), so the calibration from the default settings directory was used instead. The trailing separator is now optional, and a warning is logged whenever the calibration file is not found in the requested directory. Applies toCameraandCameraOne, and to the calibration files the SDK saves into that directory. - Fixed
open()on Windows occasionally never returning with a USB camera that stopped sending images right after its stream started. As on Linux,open()now stops waiting for images after about 30 seconds. - Fixed streams received on the same machine through local shared memory (IPC) being delivered below the sender's frame rate: on Windows, a 30 FPS stream arrived at about 21 FPS with a third of the frames dropped. The Isaac Sim extension streams this way by default.
- Fixed SVO2 files recorded in
SVO_COMPRESSION_MODE::H265with ZED SDK 5.3 or older on a board without a hardware H.265 encoder, such as the Orin Nano, not playing back:grab()returnedERROR_CODE::END_OF_SVOFILE_REACHEDfrom the first frame, or the images came out corrupted. These files now play back as they are, with no need to re-record or convert them. - Fixed applications receiving a stream with
InitParameters::input.setFromStream()crashing, or corrupting their memory, when the stream data was malformed, for example when sent by a faulty or untrusted device on the network. Malformed frames are now dropped and the stream resumes from the next keyframe. - Fixed streaming from Windows falling behind the source frame rate when the sending application has no live camera open, for example when streaming an SVO file with
sl::Camera::enableStreaming()or streaming from a simulator: a 30 FPS SVO was streamed at about 23 FPS. - Fixed SVO playback on desktop never returning the last frame of files recorded in H.264 (
SVO_COMPRESSION_MODE::H264orH264_LOSSLESS):grab()returnedERROR_CODE::END_OF_SVOFILE_REACHEDone frame early, wherever the file was recorded. H.265 files and playback on Jetson were not affected. - Fixed a GPU memory leak where declaring an
sl::Fusionobject allocated CUDA resources beforeinit()was called. GPU resources are now allocated only when the corresponding module is enabled. - Fixed SVO2 recordings of ZED X and ZED X One cameras storing each frame's exposure and gain with an earlier frame. On playback,
getCameraSettings()forsl::VIDEO_SETTINGS::EXPOSURE_TIME,ANALOG_GAINandDIGITAL_GAIN, andgetTimestamp(sl::TIME_REFERENCE::IMAGE_CENTER_OF_EXPOSURE), returned the values of a frame recorded later (one or two frames later in H.264 / H.265, about six inSVO_COMPRESSION_MODE::LOSSLESS), and the last frames of a file had none. Files recorded with older versions keep this offset.
SLAM
Features / Improvements
- Reduced the CPU usage of
POSITIONAL_TRACKING_MODE::GEN_3by about half on desktop and by up to 7% on Jetson, wheregrab()is also up to 8% faster, with the same tracking results. Each keyframe also takes about 280 kB less memory, which adds up over long sessions withPositionalTrackingParameters::enable_area_memoryon. - Improved loop closure accuracy with
POSITIONAL_TRACKING_MODE::GEN_3: once a loop is closed the map along the loop is now refined, and the correction no longer bends parts of the trajectory that were already correct.
Bug Fixes
- Fixed the
POSITIONAL_TRACKING_MODE::GEN_3trajectory occasionally drifting away by up to several meters after tracking was briefly lost. - Fixed
POSITIONAL_TRACKING_MODE::GEN_3occasionally returning a less accurate pose on a few frames of a session, with moving objects not filtered out on those frames, while tracking still reportedOK.sl::Landmark2D::dynamic_confidencecould also be NaN instead of a value between 0 and 1.
Tools
ZED Studio
- Fixed the side panel not being resizable since 5.4.0. It can also be hidden and reopened with the knob on its edge.
ZED Explorer
- Changed the ZED X One 4K to open in HD4K (15 FPS) by default. A resolution passed on the command line still takes precedence.
- Changed the HDR option to be shown only when the current camera and resolution support HDR (ZED X One 4K in HD1200 or QHDPLUS), instead of appearing greyed out at other resolutions.
ZED Depth Viewer
- Added the
-i <id>/--input <id>and-sn <serial>/--serial_number <serial>command-line options to choose which connected camera opens at launch, by its ID in the device list or by its serial number. If no connected camera matches, a warning is printed and the first available camera opens.
Samples
- Fixed the C++ retrieve tensor tutorial (tutorial 12) failing to open GMSL cameras (ZED X family) with
ERROR_CODE::INVALID_RESOLUTION: it now picks the camera's resolution automatically, like the other tutorials.