Replies: 7 comments 1 reply
-
|
I've seen that long list. |
Beta Was this translation helpful? Give feedback.
-
|
I've tried to update from my HAOS instance in the ESPHome Integration but the update fails. Here is a screenshot of the error: |
Beta Was this translation helpful? Give feedback.
-
|
Maybe I need to plug the screen into the Mac for the update? |
Beta Was this translation helpful? Give feedback.
-
Updating /config/esphome/lrpanelautooff.yamlINFO ESPHome 2025.11.0
|
Beta Was this translation helpful? Give feedback.
-
|
Oh, if it helps, here is my yaml: |
Beta Was this translation helpful? Give feedback.
-
|
When I do "Update All" from ESPHome Builder: |
Beta Was this translation helpful? Give feedback.
-
|
Use esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 16MB
framework:
type: esp-idf
sdkconfig_options:
COMPILER_OPTIMIZATION_SIZE: y
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
CONFIG_SPIRAM_RODATA: y
components:
- name: "espressif/esp_websocket_client"
ref: 1.5.0
- name: "espressif/esp-dsp"
ref: 1.7.0
- name: "bitbank2/jpegdec"
source: https://github.com/strange-v/jpegdec-esphome
ref: dev # added dev here |
Beta Was this translation helpful? Give feedback.
-
|
Thank you so much, that works perfectly.
From: strange_v ***@***.***>
Date: Friday, November 21, 2025 at 00:18
To: strange-v/RemoteWebViewClient ***@***.***>
Cc: HaWi ***@***.***>, Author ***@***.***>
Subject: Re: [strange-v/RemoteWebViewClient] Question: ESPHome update 2025.11.0 (Discussion #23)
Use dev branch for now
esp32:
board: esp32-s3-devkitc-1
variant: esp32s3
flash_size: 16MB
framework:
type: esp-idf
sdkconfig_options:
COMPILER_OPTIMIZATION_SIZE: y
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
CONFIG_SPIRAM_FETCH_INSTRUCTIONS: y
CONFIG_SPIRAM_RODATA: y
components:
- name: "espressif/esp_websocket_client"
ref: 1.5.0
- name: "espressif/esp-dsp"
ref: 1.7.0
- name: "bitbank2/jpegdec"
source: https://github.com/strange-v/jpegdec-esphome
ref: dev # added dev here
—
Reply to this email directly, view it on GitHub<#23 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ACKHLVM5MGLOBWBFTKA4VRD352OBBAVCNFSM6AAAAACMXCTYEKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKMBTGQ2TKNA>.
You are receiving this because you authored the thread.
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
Does the update to ESPHome 2025.11.0 break anything for this particular application? They list quite a bit of potentially breaking changes.
Many thanks for any insights.
User-Facing Breaking Changes
WiFi & Network
WiFi: WiFi and Ethernet components no longer block other components’ setup until connected. Components with setup priority > WIFI (802.3) now initialize immediately, even if network is disconnected. #9823
WiFi min_auth_mode: ESP8266 default will change from WPA to WPA2 in 2026.6.0. Users with WPA-only routers must explicitly set min_auth_mode: WPA before then. #11814
WiFi priority: The priority configuration option now only accepts integers (-128 to 127) instead of floats. Change priority: 5.5 to priority: 5. #11830
.local addresses: .local addresses now require mDNS to be enabled for DNS resolution. Previously attempted DNS resolution could add 10+ second delays. #11508
Network high performance: Speaker media player now always enables high performance networking mode (previously only with codec support). Users can override with enable_high_performance under the network component if needed. #11812
ESP32 Platform
ESP32 brownout protection: ESP-IDF now reduces PHY TX power during brownout to prevent boot loops. Can be disabled with sdkconfig_options: CONFIG_ESP_PHY_REDUCE_TX_POWER: n if needed. #11306
ESP32-S3 PSRAM: PSRAM mode is now required when multiple PSRAM modes are available (ESP32-S3 only). Users must explicitly choose PSRAM mode in configuration. #11470
Component Behavior Changes
Script max_runs: Queued scripts now default to max_runs: 5 (allowing 1 running + 4 queued instances) instead of unlimited to prevent crashes from unbounded memory growth. Set max_runs explicitly if you need more capacity. #11308
Remote transmitter: Remote transmitter now defaults to non-blocking mode to prevent long blocking operations (>30ms). #11524
Fan preset modes: Fan preset modes now preserve the order defined in YAML instead of being sorted alphabetically. The order in Home Assistant will match your YAML configuration order. #11483
Select state: The public state member has been deprecated and will be removed in 2026.5.0. Use current_option() method instead. Deprecation warnings will be shown during compilation. #11623
Component-Specific Changes
HM3301: AQI calculation updated to EPA 2024 standard. Values will change compared to the old 2012 formula. #9442
GDK101: Firmware version is now reported as a string instead of a float division result. #11029
Uponor Smatrix: The address property of the uponor_smatrix component was removed. Device addresses are now 32-bit instead of separate 16-bit system and device addresses. Update configurations by prepending the previous system address to individual device addresses. #11066
Pipsolar: Fixed typo warnung_low_pv_energy renamed to warning_low_pv_energy. Update YAML configurations. #10291
E-Paper SPI: Busy pin logic corrected to match datasheet (active low). Some e-paper displays may behave differently. #11349
nRF52 bootloader: Default bootloader changed for xiao_ble and adafruit_itsybitsy_nrf52840 boards. Warning shown if generic Adafruit bootloader is used. #10698
HTTP request triggers: Changed from multiple on_response/on_error triggers to a single trigger that receives variables. Update automation configurations to use the new variable-based trigger format. #11464
YAML Lambda Changes
Users who access component members directly in YAML lambdas may need updates:
Select: Change id(my_select).state to id(my_select).current_option() (deprecated, will be removed in 2026.5.0). #11623
Fan: Change id(my_fan).preset_mode to id(my_fan).get_preset_mode(). #11632
Event: Change id(my_event).last_event_type to id(my_event).get_last_event_type(). #11767
Breaking Changes for Developers
The following changes affect external component developers. Standard YAML configurations are generally not affected.
Core Framework Changes
Action/Trigger Framework: All action/trigger/condition method signatures changed to use const references (const Ts&... x) instead of pass-by-value (Ts... x). See the Action Framework Performance Optimization blog post for migration details. #11704
Controller API: Controllers now use global registry pattern. Method signatures changed to remove unused state parameters (e.g., on_sensor_update(sensor::Sensor *obj) instead of on_sensor_update(sensor::Sensor *obj, float state)). External controller implementations extremely rare. #11772
EntityBase::hash_base(): Removed deprecated virtual method (deprecated since June 2022). Remove hash_base() overrides from external components. #11783
hexencode(): Removed function deprecated since 2022.1. Use alternative encoding methods. #11383
Schema constants: Removed deprecated schema constants from core. Update external components to use current schema helpers. #11591
Component-Specific API Changes
Climate
See the Climate Entity Class: FiniteSetMask and Flash Storage Optimizations blog post for migration details.
Custom modes storage: Changed from std::setstd::string to FiniteSetMask for supported modes, and from std::vectorstd::string to std::vector<const char *> for custom fan modes and presets. #11466, #11621
Member access: Climate device members (custom_fan_mode_, custom_preset_) are now private. Use protected setter methods (set_custom_fan_mode_(), set_custom_preset_()) in derived classes. #11621
Deprecated methods: Removed methods deprecated in 1.20 (July 2021). #11388
Light
See the Light Entity Class: Memory Optimizations blog post for migration details.
Color modes: Replaced std::set with ColorModeMask bitmask class. #11348
Effect names: Changed from std::string to const char * for effect names. #11487
Deprecated methods: Removed methods deprecated in 2021.8.0. #11389
Fan
See the Fan Entity Class: Preset Mode Flash Storage and Order Preservation blog post for migration details.
Preset modes: Changed from std::setstd::string to std::vector<const char *>. The .preset_mode public member has been removed - use get_preset_mode() for reading and set_preset_mode_() for writing in derived classes. #11483, #11632
Deprecated code: Removed code deprecated in 2022.2. #11392
Select
See the Select Entity Class: Index-Based Operations and Flash Storage blog post for migration details.
Options storage: Changed from std::vectorstd::string to FixedVector<const char *>. #11514
State member: Public state member deprecated (will be removed in 2026.5.0). Use current_option() method instead. #11623
Index-based operations: Added optional control(size_t index) override for more efficient implementations. #11623
Event
See the Event Entity Class: Memory Optimizations blog post for migration details.
Event types storage: Changed from FixedVectorstd::string to FixedVector<const char *>. The last_event_type field is now private - use get_last_event_type() getter instead. #11463, #11767
Network Components
WiFi scan results: External components that access WiFi scan results after connection must call wifi.request_wifi_scan_results() in their to_code() function to prevent cleanup. #11205
use_address: Changed from const std::string & to const char * in WiFi, Ethernet, and OpenThread components. Update external components calling get_use_address() or set_use_address(). #11707
Other Components
Cover: Removed methods deprecated in 2021.9. Update to current cover API. #11391
Nextion: Removed methods deprecated in 1.20 (July 2021). Update to current nextion API. #11393
ESP32-Specific Changes
ESP-IDF advanced options: New options to disable libc locks in IRAM and VFS features. External components using these features must call helper functions to register needs. #10930, #11441
Migration Resources
Beta Was this translation helpful? Give feedback.
All reactions