Repository navigation
Feature release: a new open source driver for the PEAK-System interfaces, on the PCAN-Basic API.
Note on updating
- Window positions and the last configuration are stored per version, so after updating from 3.6.0 load your
configuration once (File → Load).
Drivers
- New CAN driver PEAK PCAN-Basic for the PEAK-System interfaces (USB, PCI, PC Card, LAN), with open source code on
the PCAN-Basic API that comes with the PEAK device driver. It shows every PEAK channel of the PC in the hardware
selection, with the speeds of the drop-down list and the PEAK special ones (33.3, 47.6, 83.3, 95.2 kbit/s). Under
Advanced a channel can be put in listen-only mode: it only receives, without acknowledge or error frames, to watch
a bus. A channel open in PCAN-View can be connected as well. Received messages carry the time stamp of the interface.
If a channel cannot be started, the reason given by PEAK (for example the channel is used by another program) is
written in the trace window. The hardware list is read in a moment and shows the firmware of each interface. - The old PEAK driver (closed code from 2017) is now called PEAK USB (Legacy) and works as before; configurations
saved with PEAK USB still open with it. - The decoding of the error frames of the new driver (type of error and counters) is not tested yet: it needs a PEAK
interface on a bus with errors.