Added Adafruit PyGamer Target

Makefile

@@ -295,6 +295,8 @@ smoketest:
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=wioterminal         examples/blinky1
 	@$(MD5SUM) test.hex
+	$(TINYGO) build -size short -o test.hex -target=pygamer             examples/blinky1
+	@$(MD5SUM) test.hex
 ifneq ($(AVR), 0)
 	$(TINYGO) build -size short -o test.hex -target=atmega1284p         examples/serial
 	@$(MD5SUM) test.hex

src/machine/board_pygamer.go

@@ -0,0 +1,147 @@
+// +build sam,atsamd51,pygamer
+
+package machine
+
+import "device/sam"
+
+// used to reset into bootloader
+const RESET_MAGIC_VALUE = 0xf01669ef
+
+// GPIO Pins
+const (
+	D0  = PB17 // UART0 RX/PWM available
+	D1  = PB16 // UART0 TX/PWM available
+	D2  = PB03
+	D3  = PB02
+	D4  = PA14 // PWM available
+	D5  = PA16 // PWM available
+	D6  = PA18 // PWM available
+	D7  = PB14 // CS for microSD card slot
+	D8  = PA15 // built-in neopixel
+	D9  = PA19 // PWM available
+	D10 = PA20 // can be used for PWM or UART1 TX
+	D11 = PA21 // can be used for PWM or UART1 RX
+	D12 = PA22 // PWM available
+	D13 = PA23 // PWM available
+)
+
+// Analog pins
+const (
+	A0 = PA02 // ADC/AIN[0]
+	A1 = PA05 // ADC/AIN[2]
+	A2 = PB08 // ADC/AIN[3]
+	A3 = PB09 // ADC/AIN[4]
+	A4 = PA04 // ADC/AIN[5]
+	A5 = PA06 // ADC/AIN[6]
+	A6 = PB01 // ADC/AIN[12]/VMEAS
+	A7 = PB04 // ADC/AIN[6]/LIGHT
+	A8 = D2   // ADC/AIN[14]
+	A9 = D3   // ADC/AIN[15]
+)
+
+const (
+	LED       = D13
+	NEOPIXELS = D8
+
+	SD_CS = D7
+
+	LIGHTSENSOR = A7
+
+	BUTTON_LATCH = PB00
+	BUTTON_OUT   = PB30
+	BUTTON_CLK   = PB31
+
+	JOYY = PB06
+	JOYX = PB07
+
+	TFT_DC   = PB05
+	TFT_CS   = PB12
+	TFT_RST  = PA00
+	TFT_LITE = PA01
+
+	SPEAKER_ENABLE = PA27
+)
+
+const (
+	BUTTON_SELECT_MASK = 16
+	BUTTON_START_MASK  = 32
+	BUTTON_A_MASK      = 64
+	BUTTON_B_MASK      = 128
+)
+
+// UART0 aka USBCDC pins
+const (
+	USBCDC_DM_PIN = PA24
+	USBCDC_DP_PIN = PA25
+)
+
+// UART1 pins
+const (
+	UART_TX_PIN = D1
+	UART_RX_PIN = D0
+)
+
+// UART1 var is on SERCOM3, defined in atsamd51.go
+
+// UART2 pins
+const (
+	UART2_TX_PIN = A4
+	UART2_RX_PIN = A5
+)
+
+// UART2 var is on SERCOM0, defined in atsamd51.go
+
+// I2C pins
+const (
+	SDA_PIN = PA12 // SDA: SERCOM2/PAD[0]
+	SCL_PIN = PA13 // SCL: SERCOM2/PAD[1]
+)
+
+// I2C on the PyGamer.
+var (
+	I2C0 = I2C{
+		Bus:    sam.SERCOM2_I2CM,
+		SERCOM: 2,
+	}
+)
+
+// SPI pins
+const (
+	SPI0_SCK_PIN  = PA17 // SCK: SERCOM1/PAD[1]
+	SPI0_MOSI_PIN = PB23 // MOSI: SERCOM1/PAD[3]
+	SPI0_MISO_PIN = PB22 // MISO: SERCOM1/PAD[2]
+)
+
+// SPI on the PyGamer.
+var (
+	SPI0 = SPI{
+		Bus:    sam.SERCOM1_SPIM,
+		SERCOM: 1,
+	}
+)
+
+// TFT SPI pins
+const (
+	SPI1_SCK_PIN  = PB13 // SCK: SERCOM4/PAD[1]
+	SPI1_MOSI_PIN = PB15 // MOSI: SERCOM4/PAD[3]
+	SPI1_MISO_PIN = NoPin
+)
+
+// TFT SPI on the PyGamer.
+var (
+	SPI1 = SPI{
+		Bus:    sam.SERCOM4_SPIM,
+		SERCOM: 4,
+	}
+)
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit pyGamer M4"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8033
+)

targets/pygamer.json

@@ -0,0 +1,8 @@
+{
+    "inherits": ["atsamd51j19a"],
+    "build-tags": ["sam", "atsamd51j19a", "pygamer"],
+    "flash-1200-bps-reset": "true",
+    "flash-method": "msd",
+    "msd-volume-name": "PYGAMERBOOT",
+    "msd-firmware-name": "arcade.uf2"
+}