STREAM AC Pro without PV – AC1 works, AC1+AC2 both show 0W

[weberdomi-ctrl]

Hi,

I am using the latest beta version of hassio-ecoflow-cloud with the following setup:

EcoFlow STREAM Ultra
EcoFlow STREAM AC Pro (without PV connected)
EcoFlow Smart Meter
Home Assistant (Docker)

I noticed what looks like an issue with the STREAM AC Pro power reporting.

Behavior:

If a load is connected only to AC1, Home Assistant reports the power correctly.
As soon as I connect loads to both AC1 and AC2, Home Assistant reports 0 W for both outputs.
The connected devices continue to operate normally.
The EcoFlow mobile app shows the correct output power.
The problem only seems to affect Home Assistant reporting.

I have also noticed that the following sensors always report 0 W on both the STREAM Ultra and STREAM AC Pro:

In Power
Out Power

Even when the devices are clearly charging, discharging, importing from the grid, or supplying loads, these sensors remain at 0 W.

Another possible issue:

Sometimes EcoFlow sensor values stop updating in Home Assistant.
Opening the EcoFlow mobile app appears to trigger updates again.
I am not sure if this is related or a separate issue.

Can anyone with a STREAM AC Pro (without PV) confirm whether:

AC1 and AC2 power reporting is currently supported?
The In Power and Out Power sensors should provide valid values for STREAM Ultra and STREAM AC Pro?

Thanks.