Database and STM32

This project is part of a working, fully automated IOT (internet of things) water/wastewater management and irrigation system.

GPS/GPRS/SMS Demo

Using Arduino MKR GSM 1400 to view location info and weather info, send GET requests, serial Passthrough, and deep-sleep timer

Smart hive

Atlanta firmware - firmware for IoT device

A simple app to send alcohol level via gprs to an endpoint with location coordinates

A GPS GPRS tracker

A hardware-agnostics non-blocking GSM/GPRS modem driver written for embedded devices.

Smart Tracking Seal, which is built using an A9G module and an ATmega328P microcontroller, enables real-time location tracking and lock state verification, with notifications via mobile app and SMS.

The IoT EcoBoard v3 is microcontroler based on the processor ATSAMD21G18 ARM Cortex M0 at 48Mhz with 3V3 logic, as the Arduino Zero. The chip has 256K of FLASH and 32K of RAM. It's fully compatible with Arduino and Adafruit libraries.

GPS Tracking Unit for Covid-19 patients to make sure they stay home QUARANTINED

Sources et fichiers pour le magazine Hackable #23

Mandar sms con arduino y SIM800L

Library, now using AsyncWebServer instead of (ESP8266)WebServer, for enabling GSM/GPRS and WiFi running simultaneously as well as configuring/auto(re)connecting at runtime GSM shields to Internet and Blynk and ESP8266/ESP32 WiFi modules to best or available MultiWiFi APs and MultiBlynk servers. Enable adding dynamic custom parameters from sketch…

A much more comprehensive library for Arduino SIM900 shield.

Send data to thingspeak using SIM800 (GPRS Technology) and Atmega328p MCU (Arduino)

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Library to use A9G (GPS+GPRS module) with AT commands in Arduino framework-based systems. Supports JSON as payload in MQTT mode!

This is a test program for the Ai-Thinker A7 module connected to an Arduino Pro Micro or the Elecrow 32u4 with A7 module.