Arduino code for connection between CCS811 and ESP32. (Refer android application under Thanesh-Ravindran/airapp)

MicroPython Driver for the AGS02MA TVOC sensor

Data and analysis relateted to the Bleed Orange, Measure IAQ campaign at the University of Texas at Austin

An IOT Based Android Application to monitor Total Volatile Compound (TVOC) and Equivalent Calculated Carbon Dioxide (eCO2) readings - which are read from a CCS811 sensor, wired to an ESP32.

Workspace Health Monitoring Gadget

A sensor to report carbon dioxide and volatile organic compound levels to MQTT and an ESP32's display

C library for CCS811 gas sensor I2C interface. Sample implementations for esp32 and stm32 included

M5StickC Gas sensor display

Air-pure is an IoT-Based Indoor Air Quality Monitoring System. This proposal has as main objective to provide information, such as the concentration of CO2 and Total Volatile Organic Compounds (TVOC), Relative Humidity and Temperature.

Mestrado Computação Móvel 2018/19: Implementação de um Node energicamente autónomo com múltiplos sensor e envio dos valores dos mesmo utilizando tecnologia LoRa para o TTN utilizando um gateway Dragino, na Disciplina de Sistemas Embebidos - IPG MCM 2019

LED glows when the CO2 and TVOC levels in the room are too high.

MicroPython module for work with ENS160 Digital Metal-Oxide Multi-Gas Sensor.

Componente con datos para estación meteorológica en tiempo real de la ciudad de Chipiona que muestra un resumen del tiempo en cada momento: Temperatura, humedad, tvoc, uv, uva, uvb, viento, rayos. Mirror de https://gitlab.com/raupulus/vue-component-weather-chipiona

Micropython logger with sgp30 sensor and gps build on esp32

AGS10 full function driver library for general MCU and Linux.

Clase para integrar el sensor CJMCU-811 con python en aplicaciones fácilmente con métodos para obtener valores y estructura para generar dinámicamente su tabla con SQLAlchemy. Mide: - CO2 → Concentración de CO2 - TVOC → Compuestos orgánicos volátiles. Mirror de https://gitlab.com/raupulus/raspberry-sensor-cjmcu811

Library for AMS iAQ Core C Air quality sensor using esp-open-rtos

Small Python3 based utility to send tVOC, eCO2 and Particulate Matter to MQTT server

Code to read CCS811 and HDC1080 data from CJMCU-8118, print it to serial monitor and save it to .csv file.

This repository has the code that helps you to build DIY CO2 measuring devices and connect them to your smartphone.