Repository navigation
Releases
Releases · ttiot/curingChamber
v0.8.0
Added
- Chamber conditions on weigh-ins. A weigh-in can carry the chamber
temperature (°C) and relative humidity (%) observed when it was taken, for
chambers with no sensor where the values are read off a thermo-hygrometer by
hand: new optionaltemperature/humidityfields on therecord_weight
action and theweigh_inwebsocket command, two inputs in the panel's
weigh-in form, two columns in the history table and in the CSV export. On a
weigh-in taken now with the fields left blank, the current (filtered)
sensor readings are snapshotted instead, so a batch keeps the context of
its drying curve long after the recorder has purged the history; a
backdated weigh-in is never filled from live sensors. These values are
context only and never feed the regulation. Stored batches and
export_batch/import_batchpayloads without the fields load unchanged.
What's Changed
Full Changelog: v0.7.1...v0.8.0
v0.7.1
Security
- Weigh-in photos can no longer read arbitrary host files. The photo
decoder treated any string naming an existing file as a path to copy into
the photo store, so any logged-in user (admin or not) could feed
/config/secrets.yamlor anything under.storageto therecord_weight/
import_batchactions or theweigh_in/batch/importwebsocket
commands, then read it back withbatch/exportandinclude_photos. The
coordinator now only decodes inline data (data URL or base64). The
record_weightaction still accepts a local file path, but checks it with
hass.config.is_allowed_path(allowlist_external_dirs, the rule
camera.snapshotfollows) and refuses anything else; the websocket API and
import_batchnever interpret a photo as a path. Reported during the HACS
default-catalog review (hacs/default#11574).
Changed
- README: the HACS install section leads with the default catalog (search for
Curing Chamber in HACS or use the My Home Assistant button); adding the
custom repository stays as the fallback.
What's Changed
Full Changelog: v0.7.0...v0.7.1
v0.7.0
Added
- Automation blueprints in
blueprints/automation/curing_chamber/:
phase / program notifications, cut power on sensor fault, care and weigh-in
reminder forwarding. Import URLs are listed in the README. - Richer batch comparison. A batch's detail shows the chamber
temperature / humidity recorded over its life under the drying curve, and
the History table gains Mean T° and Mean RH columns computed from the
recorder history of each finished batch (next to the program used). - Ambient history in the panel. The Chamber view gets a Temperature &
humidity history card (24 h / 7 d / 30 d) drawn from the recorder history
of the source sensors (and the core probe), with the current targets as
dashed lines. Websocketstatecarries the source entity ids insources. - Automatic housekeeping. New Batches & housekeeping options step:
auto-archive completed batches after N days and delete photos of
archived batches after N days (both 0 = off by default), applied hourly.
Batches now recordcompleted_at/archived_at; auto-archiving fires a
batch_archivedbus event. - Journal on the Lovelace card. Batch summaries carry
last_event
(kind, timestamp, note); the card shows the last journal entry per batch
and a one-tap Turned button recording it. - Batch import.
export_batch(service andbatch/exportwebsocket)
takesinclude_photosto embed the weigh-in photos asphoto_data; the new
import_batchservice andbatch/importwebsocket recreate a batch from
that record (weigh-ins, journal, photos), with a fresh id unless
overwrite. The panel's Export JSON now embeds the photos and the
batch list gets an Import a batch button. - Program care reminders. A program may carry
reminders
(kind,every_hours, optionalnoteandphases): while it runs, a
notification suggests that journal entry at the given interval (wall clock,
not while paused; a phase-scoped reminder counts from the phase start), with
areminderbus event carrying the active batches concerned. The panel
editor has a Care reminders section, the program card shows the next
reminder, and the Current phase sensor exposes it innext_reminder.
Cheese presets turn (and wash) the products every day or two. - Weigh-in reminder. New Weigh-in reminder after N days option in the
notifications step (default 7 days, 0 disables): an active batch with no
weigh-in for that long gets a persistent notification (and the configured
notify services) once per interval, aweigh_in_duebus event, a
weigh_in_dueflag in its summary (and the list in the Active batches
sensor attributes) and a badge on its panel card. Recording a weigh-in
clears it. - Ineffective-actuator detection. An actuator that runs continuously for
longer than the new Ineffective-actuator detection delay option (default
60 min, 0 disables) without moving its quantity by at least 0.3 °C / 2 %RH
raises a warning (actuator_ineffective_<cool|heat|humidify|dehumidify>)
with a targeted hint (compressor, iced evaporator, empty tank…), cleared as
soon as the quantity moves. New diagnostic binary sensor Actuator
ineffective listing the actuators concerned.
What's Changed
- Reminders, ineffective-actuator detection, history charts, batch import, housekeeping, blueprints (0.7.0) by @ttiot in #12
Full Changelog: v0.6.0...v0.7.0
v0.6.0
Added
- Exponential ETA. From three weigh-ins the batch ETA uses an exponential
drying model (loss = L0 + A·(1 − e^(−k·t)), grid search onk) whenever it
fits the weigh-ins at least as well as the straight line and the target lies
below its asymptote; otherwise the linear extrapolation remains. Batch
summaries carryeta_modeland the panel shows it next to the ETA. - Product core probe. New Core temperature delta sensor (core minus
chamber air, with a core probe), criticalcore_temp_highalert when the core
stays above the newcore_temp_maxoption (default 24 °C) for the high-temp
duration, core gauge in the panel, and a new phase end kindcore_temp
(core_temp_target: the phase ends when the core crosses the target from
where it started;duration_hoursis the cap / no-probe fallback). - Batch journal and export. Dated entries with a kind (note, salting,
hung, turned, washed, tasting, other…) and a note:add_batch_event/
delete_batch_eventservices,batch/event/add/batch/event/delete
websocket commands,batch_eventbus event and a Journal card in the
panel.export_batchservice (response) andbatch/exportwebsocket return
the full record (batch, weigh-ins, journal, derived figures, program); the
panel offers Export JSON and Export CSV (one timeline of weigh-ins
and journal entries). - Batch ↔ program link.
create_batch/batch/createaccept
start_program(panel box Start this program now): the linked program
starts unless one is already running or paused. Completing or archiving the
reference batch linked to the running program (by hand or on reaching its
target), with no other active batch on that program, ends the program and
applies itson_completepolicy. The program engine gainscomplete().
Changed
- Program validation takes the core probe into account (
has_core_probe):
acore_tempphase without probe needsduration_hoursand warns. - Websocket
chambersentries carryhas_core_probe;statecarries
core_temp,core_delta,has_core_probeandhas_scale.
What's Changed
Full Changelog: v0.5.0...v0.6.0
v0.5.0
Added
- Setpoint ramps. A phase may carry
start_temp/start_humidityand
ramp_hours: the active targets move linearly from the start values to the
phase targets over the firstramp_hourshours (paused time excluded), then
hold. The panel editor has a ramp line per phase, the program card shows the
ramp in progress and the Phase time remaining sensor exposes the final
phase targets and the ramp time left in its attributes. - Chamber kind (
chamber_kind:charcuterieorcheese) in the first
config step and in the Regulation & safety options. A chamber lists the
presets of its kind only (any preset can still be started by id); the
condensation alert margin is now an option (condensation_margin) and
defaults to 0.5 °C for a cheese cave (1 °C otherwise). - New presets. Charcuterie: chorizo (ramped drying), lomo embuchado
(ramped), viande des Grisons, jambon cru. Cheese cave: bloomy rind, washed
rind, pressed (ramped), blue, lactic / goat, cheese cave hold. Programs carry
acategory(charcuterieby default, orcheese). - Program import / export. Services
export_programs(returns a portable
{"format": "curing_chamber/programs", "version": 1, "programs": [...]}
payload) andimport_programs(payload, list or single program;overwrite
flag; preset ids are never overwritten). Websocketprogram/import. The
panel's Programs view gets Export / Import buttons working on.json
files, and groups My programs and Presets. - Degraded mode hours diagnostic sensor (
total_increasing): cumulative
hours during which a manual action was required, for long-term statistics.
Changed
select.<chamber>_programoptions now depend on the chamber kind.
What's Changed
Full Changelog: v0.4.0...v0.5.0
v0.4.0
Added
- Panel: Add a chamber button (header and empty state, admins only) that
opens the integration's config flow directly. - Websocket
curing_chamber/subscribe_chambers: pushes the chamber list on
subscribe and whenever a chamber is loaded, unloaded or renamed.
Changed
- Panel: the chamber selector now follows that subscription, so chambers added,
renamed or removed while the panel is open appear without a page reload. A
chamber that disappears briefly (options reload) keeps its selection.
What's Changed
- HACS workflow: drop the weekly schedule by @ttiot in #8
- Panel: live chamber list and "Add a chamber" button (0.4.0) by @ttiot in #9
Full Changelog: v0.3.1...v0.4.0
v0.3.1
Added
- Brand icon (
custom_components/curing_chamber/brand/icon.png,icon@2x.png)
so the integration shows an icon in Home Assistant and HACS.
Changed
hacs.jsondeclares the minimum Home Assistant version (2024.7.0, needed
forasync_register_static_paths) and renders the README in HACS.- HACS validation now runs without any ignored check (brands, topics,
description), as required for inclusion in the HACS default store.
What's Changed
Full Changelog: v0.3.0...v0.3.1
v0.3.0
Added
- Sidebar panel (
curing-chamber-panel, registered by the integration —
works on every install type, including HA Container): Chamber view (gauges,
actuators, program timeline and controls, alerts, regulation decisions),
Batches view (drying curves, weigh-in history, photo gallery, weigh-in form
with camera capture and in-browser downscaling), Programs view (visual
multi-phase editor with live validation) and History view (overlaid curves of
finished batches). Chamber selector for multi-chamber setups, FR/EN, themed
through HA CSS variables, open to non-admin users. - Websocket API (
curing_chamber/*): chambers, livestate/subscribe,
batches (list/get/create/set_status/set_reference/delete),weigh_in
(+weigh_in/delete), programs (list/validate/save/delete). Services stay for
automations. - Manual weight
numberentity. Type a weigh-in straight from the HA UI
(device page, entities card, mobile app): it is recorded on the reference
batch, or — with no batch — remembered as the chamber weight so Set reference
weight, the Weight loss sensor andweight_lossphases work without a
scale. Weight resolution order is now reference batch → scale → manual entry.
Changed
- Private photos. Weigh-in photos now live under
<config>/.storage/curing_chamber/photos/and are served only to logged-in
users by an authenticated view (/api/curing_chamber/photo/…); the card and
panel sign the URL. Photos previously written under the publicwww/folder
are migrated automatically on startup. - Recorder footprint. The active-batches sensor's
batchesattribute is now
a light summary (no weigh-in history, no archived batches) and carries the
entry_id; weigh-in history, regulation decisions and alert details are kept
out of the recorder database (_unrecorded_attributes). - Card. Loads the weigh-in history over websocket and downscales photos in
the browser. Card and panel JS URLs carry the integration version so browsers
pick up new files after an update. - Release workflow runs once per published release (no more duplicated notes).
What's Changed
- Sidebar panel, websocket API, private photos and manual weight entry by @ttiot in #5
- Release 0.3.0 by @ttiot in #6
Full Changelog: v0.2.0...v0.3.0
v0.2.0
What's Changed
- Fix HACS validation (LICENSE, hacs.json, store-only checks) by @ttiot in #2
- Add pure batch-tracking model & engine by @ttiot in #4
Full Changelog: v0.1.0...v0.2.0
What's Changed
- Fix HACS validation (LICENSE, hacs.json, store-only checks) by @ttiot in #2
- Add pure batch-tracking model & engine by @ttiot in #4
Full Changelog: v0.1.0...v0.2.0
What's Changed
- Fix HACS validation (LICENSE, hacs.json, store-only checks) by @ttiot in #2
- Add pure batch-tracking model & engine by @ttiot in #4
Full Changelog: v0.1.0...v0.2.0