v0.9.7

Bug Fixes

• guard AMD applies and stale results
• reconcile imported power state
• reject unordered STAPM and PPT limits
• fail applies when PM-table readback differs
• serialize post-resume CPU power write

Documentation

• add the Ryzen testing guide as a web page

Features

• show Intel package power

Maintenance

• bump to 0.9.7

Verification

• VirusTotal: https://www.virustotal.com/gui/file/b01ffa0f1b08bcd86bbfde2a4ef4f7802ba52108803c0835330c73955b5a5f8e
  • 0 malicious, 0 suspicious of 71 engines

v0.9.6

Bug Fixes

• clear stale reset intent and sync latch state
• persist the manual language choice

CI/CD

• put the VirusTotal verdict on its own line

Documentation

• add social metadata and refresh screenshots for 0.9.5
• qualify the homepage hardware requirement as tested
• drop the supported claim from the README platform notes
• sync architecture tree and measured resource usage
• document the AMD read-only RyzenSMU card
• document the experimental AMD CPU Power support
• add the Ryzen power testing checklist and issue form
• add the Traditional Chinese README, site, and Ryzen testing guide
• add the USB expansion card misclassification report form

Features

• add persisted AC/Battery power-limit profiles
• record MMIO wall defaults for AC and battery
• add read-only RyzenSMU PM-table telemetry
• add experimental RyzenSMU writes, profiles, and keep-alive
• add the experimental CPU Power card controls

Maintenance

• remove pre-0.9.0 screenshots
• bump to 0.9.6

Refactoring

• guard stale applies and drop dead messages
• split limits into decode, validate, and write modules
• split the poll loop into phase modules

Verification

• VirusTotal: https://www.virustotal.com/gui/file/f68afecf16704586e80ea88539b648401c3791033ea9491035667c9c52760fdc
  • 0 malicious, 0 suspicious of 71 engines

v0.9.5

Bug Fixes

• curve seed after reset, calibration median abort, OneDrive export
• preserve import duty baseline, guard tray quit, tag calibration runs

CI/CD

• tidy release notes and group the VirusTotal link

Documentation

• read SHA-256 from the release asset digest
• show the VirusTotal result under the latest download
• describe the keep-alive toggle after the Sync move

Features

• move the keep-alive policy to About and slow it to 5 minutes

Maintenance

• batch tick refreshes, guard sync restart, fix comments
• rename GitHub owner to vinctw22
• bump to 0.9.5

Verification

• VirusTotal: https://www.virustotal.com/gui/file/97adcce43c8d14bfd1ba19b48b0fc78d103899f180606d2d43ab3663c4d7c619
  • 0 malicious, 0 suspicious of 71 engines

v0.9.4

Bug Fixes

• always populate edit fields from snapshots
• prime edit fields when hardware appears
• target tooltip updates at the pump window
• calibration abort restores fans, debounce guards, hot-start guard
• hardened import read, explicit no-overwrite export
• wall-jump reload, battery dedup, 5s tray tip; tests

CI/CD

• add CodeQL static analysis for Rust
• skip Rust CI for docs and asset-only changes
• submit release binary to VirusTotal and link the report

Documentation

• refresh feature list for recent telemetry work
• note unreleased 0.9.4 features in README
• add GitHub Pages project site with Privacy Policy and License
• add SECURITY.md and Security page on project site
• expand homepage features, add Limitations page
• sync README and site
• sync README arch tree and Security page
• live release info on homepage
• rework site into home, downloads, changelog, contribute pages
• note planned AMD support requires community testing

Features

• turbo telemetry, tray temp tip, and peripheral status rows
• add settings export and import
• add per-fan curves on multi-fan machines
• add calibration wizard for per-fan RPM tables

Maintenance

• bump to 0.9.4

Other

• Style: cargo fmt across recent edits

Refactoring

• split into window, system, and startup_task modules
• drop the empty ExpansionCard abstraction
• collect poll state and extract phase functions
• move poll state and phases into background_task/poll
• split settings IO and calibration dispatch into config_io
• to_wide convergence, docs, caches, label tests
• split shared currency types into types.rs
• split single file into config/ submodules

Testing

• stop echoing user principal in spoofed-env assertion

Verification

• VirusTotal: https://www.virustotal.com/gui/file/a12a9f8026c63ff5c30eaf74027d63254445723156ee6b2596da4fb057e1cdf1 — 0 malicious, 0 suspicious of 71 engines

v0.9.3

Bug Fixes

• harden task UI, installs, and CPU power state

• slow idle CPU polling and bound retries

• raise manual high-temperature duty floor

• tighten charge-limit readback retries

• accept read-only MMIO values outside model caps

• invalidate auth cache and persist sync intent

• isolate tests and make height probe lock-free

• tighten retries and skip redundant updates

• reject reparse-point log directories

• remove the hardcoded 80C curve floor

• re-evaluate idle state before CPU power polls

• bump libz-sys past RUSTSEC-2026-0418

• keep tempfile on getrandom 0.4.3

• hello tiebreak before EC client reset

• manual 95C floor at 90 instead of the 80/90 handover

CI/CD

• pin actions and add MSRV/weekly release checks

• require MSRV check before releases

Documentation

• document config internals and MSRV

• add CI and release status badges

Features

• deep battery and PD firmware telemetry

Maintenance

• bump to 0.9.3

Other

• raise MSRV to Rust 1.94

• raise MSRV to Rust 1.99.1

• Deps: bump smallvec

• Merge pull request #8 from vincent-chang-rightfighter/dependabot/cargo/cargo-6d9cf0bd4f

Refactoring

• drop unused versions snapshot fields

• share limit range checks between UI and writer

Testing

• add deterministic fuzz coverage

Contributors: @dependabot[bot]

v0.9.2

Bug Fixes

• show app version in About software section

• reset manual ramps when unified duty toggles

• hand control to firmware when curve has only battery readings

• avoid spurious AC-to-battery reset on battery boot

• map Laptop 12 Core 3 to the Laptop12 family

• resolve winget only from trusted Program Files packages

• harden scheduled task XML against TOCTOU

• limit EC initialization to one in-flight attempt

• hand fans back to firmware on session end

• stop sync around Apply and restore it on failure

• require the MSR half before reporting CPU power available

• keep PL reset pending until the write succeeds

• distinguish unreadable BIOS defaults from a missing file

• read live RAPL units before restoring BIOS defaults

• retry charge-limit writes after a failed apply

• keep polling for AC transitions while idle

• restore sync when a BIOS-defaults reset fails

• avoid blocking on the scheduled-task query and toggle

• reset DLL state after the combined PawnIO update

• latch sync startup failures and clear Syncing state

• clear the last duty after handing control back to firmware

• reject enabled limits with a zero time window

• back off failed AC-to-battery resets

• evaluate the 80C guard only on the active duty path

• stop reporting the mainboard board ID as an expansion card

• display no cap when the charge limit is disabled

• preserve sub-zero temperature readings

• diagnose time and clamp readback differences

• avoid duplicate BIOS backups and symlink reads

• fence EC writes before the final firmware handover

• fsync debounced config saves

• wait briefly for the tray pump to exit

• free the DLL on init failure and cache a missing version

• move the task XML into an admin-only ProgramData directory

• route the startup refresh through the single EC dispatcher

• keep stop_sync flags under the thread lock

• bring the tray menu to the foreground

• ignore the config directory override in release builds

• bound winget install and update runtime

• key the Authenticode verdict cache by DLL path

• cap module archive size before and during extraction

• refuse a fallback that would overwrite an unmarked local install

• reject hard-linked BIOS defaults files

• keep the release check inside the caller timeout

• only clean stale task XML older than an hour

• surface time and clamp readback differences

• validate config and BIOS files through one handle

• persist chart window and correct status text

• reject Windows alias paths and link members

• stop startup refresh after a dispatch failure

• join child pipe readers on timeout

• enforce firmware time-window bounds

• tighten archive extraction bounds

• treat the 0x614 max window as advisory

• bound validated config reads and corrupt backups

• quarantine BIOS defaults from validated bytes

• remove temporary archive on pre-check failure

• require an admin-only executable path

• avoid negative battery current when AC state is unknown

• drop unsafe legacy tasks and clean child waits

• allow portable startup registration again

• enforce curve safety floor and monotonic duty

• harden BIOS capture, sync restart, and resume handover

• throttle firmware handovers and refresh startup data

• repair module updates and bound install/auth tasks

• refresh late versions and harden UI state

• enumerate all Laptop 16 PD ports

• bound registry reads and isolate startup task test

• keep reinit cleanup from clobbering a newer pump

• verify charge-limit writes with readback

• harden capture and make MMIO read-only

• isolate driver calls on a dedicated runtime

• render the 80C floor on the curve canvas

CI/CD

• track cargo dependency updates

Documentation

• record accepted advisories and local audit command

• document startup hardening and logoff limitation

• align capture, polling, and port behavior

• document MSR-only MMIO behavior

Maintenance

• update tokio and clipboard-win for cargo audit

• drop unused core affinity pinning

• v0.9.2

Other

• make release unwind behavior explicit

• Deps: bump cargo packages without parking_lot 0.13

Refactoring

• drop unused history window field

Testing

• serialize tests that use the global EC dispatcher

• make versioned-save test order-independent

v0.9.1

Bug Fixes

• gate PL floor and order check on enabled toggles

Documentation

• mention one-click copy buttons on About page

• refresh screenshots to v0.9.0

• show v0.9.0 screenshots in a 2x2 grid

• refresh measured memory footprint

• note v0.9.0 sleep/wake hardening

• refresh stale architecture entries

Maintenance

• bump version to 0.9.1

v0.9.0

Bug Fixes

• share one band per two-column row so bottoms align

• stack sections as independent full-width cards

• keep Device and Diagnostics side by side

• keep Software beside Theme and Updates

• pad Theme+Updates column to Software height

• trim Theme+Updates match pad 64 to 12

• drop match pad, a constant cannot track dynamic heights

• pad Software to meet Theme+Updates (measured 42px)

• centralize PL write-boundary caps for UI and BIOS restore

• hand Manual mode back to firmware on stale thermal

• release EC mutex on write timeout instead of orphan-holding it

• never unload PawnIO DLL under in-flight users on reset

• revoke all watched explicit write ACEs, not just Everyone

• write schtasks XML with create_new unique names

• resolve task principal from token, scope instance mutex

• strict update-check fetch and tag shape

• bound sync retries and keep reset pending across failures

• pin 64-bit registry view, accept empty REG_SZ

• Light contrast pass and Black plot lift

• harden EC handover and PL/fan limits

• pin winget/modules download and config write

• unify rule/scrollable/mode styles

• retry quit handover and tighten fan guards

• align PL validation across UI/BIOS/sync

• pin system tool paths and download fetches

• keep selected text readable and unify views

• cap concurrent EC reads with semaphore

• enforce per-model PL ceilings

• keep fan loop alive on EC backpressure

• close PL/bios validation gaps

• harden task, log, config and download paths

• keep selected text readable and unify charts

• re-check shutdown after EC lock and deduplicate counters

• unify quit handover retries and clamp hot drags

• validate modules directory before use

• shutdown-aware EC lock wait for per-fan writes

• replace deprecated fetch_update with compare_exchange

CI/CD

• least-privilege jobs, pinned audit, signed-by-hash releases

• add dispatcher soak workflow and dependabot

• run dependabot monthly instead of weekly

• tag-based actions with grouped dependabot bumps

• bump the actions group with 4 updates

Documentation

• document snapshot alloc tradeoff

• sync binary size, panic, and env override notes

• document single-writer EC dispatcher

Features

• add single-writer dispatcher with bounded queue

• harden single-writer dispatcher

Maintenance

• bump version to 0.9.0

Other

• Merge branch 'master' into dependabot/github_actions/actions-cfe433e3f5

• Merge pull request #5 from vincent-chang-rightfighter/dependabot/github_actions/actions-cfe433e3f5

Performance

• prefer size over speed in release profile

Refactoring

• thread palette through settings views

• introduce EcHw trait behind dyn dispatch

• route all EC I/O through single writer

• drop hardcoded card pad, unify lock-dot fill

• wrap About updates help text onto three lines

• tighten About updates hint into one paragraph

• adapt call sites to typed dispatcher errors

Testing

• soak dispatcher with randomized ops and quit storm

Contributors: @dependabot[bot]

v0.8.0

Bug Fixes

• show quit confirmation above About

• compute gray against the card background

• make Black true black instead of Oxocarbon gray

• paint Black window background true black

• give Gruvbox its signature orange accent

• mop up hardcoded colors from review

• close hardware write gaps from review

• review leftovers (paths, battery gate, audit)

• review batch 2 (config dir, DACL, locks, loop death)

• cap per_fan_duty length at validate

• point powershell pin at its real subpath

Features

• full theming with Default preserving the current look

• paint chart panels and move Updates under Theme

• add Tokyo Night, Gruvbox, Mocha, and Nightfly schemes

• add Black scheme, drop Tokyo Night, theme the accents

• fan curve follows the theme accent

• dim secondary text, brighten Gruvbox green

Maintenance

• bump version to 0.8.0

Refactoring

• tidy remaining review items F18/F17/F16/F3

• group the page into labeled sections

v0.7.0

Bug Fixes

• fail closed when the single-instance mutex cannot be created

• find main window by PID instead of title

• enforce config ACL by revoking Everyone write ACEs

CI/CD

• watch upstream PawnIO.Modules releases

• verify git-cliff checksum before running it

Features

• check for app updates from the About page

Maintenance

• accept-list three transitive iced advisories

• remove redundant cfg(windows) and document icon_gen

• bump version to 0.7.0

Other

• raise png to 0.18

• raise sha2 to 0.11

• raise dirs to 7

• refresh patch-level dependencies

Refactoring

• split background_task mode arms into submodules