Skip to content

JTDX-VU v0.7.3

Choose a tag to compare

@vu2cpl vu2cpl released this 08 Oct 23:42
· 146 commits to jtdx-vu since this release

JTDX-VU for VUCG v0.7.3. A check for new releases, auto logging from a JTTY macro, and two fixes to the Auto CQ button. Everything else is as in v0.7.2.

What's new in v0.7.3

  • Tells you when a new release is out. Once a day JTDX-VU asks GitHub for the latest JTDX-VU release: about 10 s after start, or later while it stays open, whenever a day has passed since the last check that got an answer.
    • If the release is newer than yours, a window shows its release notes with Download (opens the release page in your browser), Skip This Version and Remind Me Later. Otherwise it says nothing.
    • If GitHub can't be reached it says nothing, and tries again an hour later and at the next start. Nothing is downloaded or installed.
    • Help > Check for Updates... checks at any time and always says what it found.
    • Turn the daily check off with the tick Settings > General > "Check for updates automatically".
    • The only request is one anonymous GET to api.github.com (/repos/vu2cpl/jtdx-vu/releases/latest); no other server is involved.
    • v0.7.3 is the first version with the check, so you will be told about the releases after it.
  • Auto logging from a JTTY macro. Put %LOG in a macro (e.g. "TU %H 73 %LOG") and sending it also logs the QSO, straight in without the Log QSO dialog, the same way as Settings' auto log (log file, UDP "QSO Logged" / ADIF to your logging program). %LOG itself is not sent, and a macro of just %LOG only logs. A QSO is logged once: pressing it again, or the "TU ..." message that normally opens the dialog, leaves an already-logged QSO alone until the DX call changes. The Log QSO button still opens the dialog.
  • The Auto CQ button keeps its width. The countdown is now on a second line under "Auto CQ" ("4:37", or "12m" from 10 minutes up); in v0.7.2 "Auto CQ 0:58" widened the button and the right-hand column.
  • The FT8 / FT4 / FT2 countdown runs all minute. With Auto CQ (Call Non-Stop) on, v0.7.2 showed whole minutes in the first half of each minute (5:00 at the start) and only counted down in the second half. It now counts down throughout. The watchdog itself was always right; only the display lagged. As in stock JTDX, any click, key press or window activation in JTDX-VU resets the watchdog, so the count goes back to the full time then.
  • The README's title line and title-bar example still said v0.6.0; they now follow the release.

AetherSDR users

AetherSDR 26.9.5 stopped sending TCI audio after a TCI client reconnected (aethersdr/AetherSDR#6006). That is fixed in AetherSDR 26.10.1: update AetherSDR if JTDX-VU says "no audio from the SDR program". The FlexRadio VITA-49 rig type avoids TCI altogether.

Downloads

Platform File Runs on
macOS, Apple Silicon JTDX-VU-0.7.3-macos-arm64.zip macOS 14 Sonoma or later
macOS, Intel JTDX-VU-0.7.3-macos-x86_64.zip macOS 15 Sequoia or later
Windows x64 JTDX-VU-0.7.3-windows-x64.zip Windows 10 / 11, 64-bit
Raspberry Pi / Linux arm64 jtdx-vu-0.7.3-linux-arm64.deb Raspberry Pi OS / Debian 12 (bookworm), 64-bit

Each file has a matching .sha256 checksum. JTDX-VU installs alongside a
stock JTDX on macOS and Windows; on the Pi the package replaces a stock
jtdx package.

How to install

macOS (Apple Silicon or Intel)

  1. Download the zip for your Mac (Apple menu > About This Mac: "Apple
    M…" chip = arm64, "Intel" = x86_64) and double-click it to unzip.
  2. Drag JTDX-VU into Applications.
  3. First launch. The app is ad-hoc signed, not notarized, so macOS
    blocks the first open:
    • macOS 15 Sequoia and later: double-click JTDX-VU, click Done on
      the warning, then open System Settings > Privacy & Security,
      scroll down and click Open Anyway next to "JTDX-VU was
      blocked", and confirm.
    • macOS 14 Sonoma: right-click (Control-click) JTDX-VU > Open >
      Open.
    • Or, in Terminal: xattr -dr com.apple.quarantine /Applications/JTDX-VU.app
  4. Allow the microphone when asked; that is how macOS names access to
    your radio's sound card. If you clicked Don't Allow, turn JTDX-VU on in
    System Settings > Privacy & Security > Microphone.
  5. Shared memory (one-time, every Mac). The decoder needs more SysV
    shared memory than the macOS default; without it JTDX-VU stops with
    "Unable to create shared memory segment". In Terminal:
    sudo sysctl -w kern.sysv.shmall=32768 kern.sysv.shmmax=33554432
    That lasts until the next restart. To make it permanent, download
    Darwin/com.jtdx.sysctl.plist from
    this repo and run
    sudo cp com.jtdx.sysctl.plist /Library/LaunchDaemons/.
    It may need redoing after a macOS upgrade.
  6. Set up your callsign, radio and audio in JTDX-VU > Settings…
    (Cmd+,).

Upgrading: quit JTDX-VU, replace the app in Applications with the
new one, and repeat step 3 if macOS asks. Settings
(~/Library/Preferences/JTDX-VU.ini) and data
(~/Library/Application Support/JTDX-VU) are kept.

Windows 10 / 11 (64-bit)

  1. Download JTDX-VU-0.7.3-windows-x64.zip. Before unzipping,
    right-click the zip > Properties, tick Unblock, OK; this saves
    a warning for every file inside.
  2. Right-click > Extract All… to a folder of your choice, for example
    C:\JTDX-VU. No installer and no administrator rights are needed.
  3. Run bin\jtdx.exe in that folder. If Windows SmartScreen says
    "Windows protected your PC", click More info > Run anyway (the
    program is not code-signed). Right-click jtdx.exe > Send to >
    Desktop (create shortcut) for a desktop icon.
  4. If Windows Firewall asks, allow access on private networks (JTDX-VU
    talks UDP to logging programs such as Log4OM, N1MM or JTAlert).
  5. For rig control through OmniRig, install
    OmniRig separately. Hamlib, TCI
    and the other rig interfaces are built in.

Upgrading: quit JTDX-VU and extract the new zip over the old folder
(or into a new one). Settings are stored in your Windows profile, not
in the program folder, so they are kept.

Raspberry Pi / Debian 12 (arm64)

Needs a 64-bit Raspberry Pi OS (Bookworm) or Debian 12 on arm64 - a Pi 4
or Pi 5 is recommended.

  1. Download jtdx-vu-0.7.3-linux-arm64.deb, then in a terminal in the
    download folder:
    sudo apt update
    sudo apt install ./jtdx-vu-0.7.3-linux-arm64.deb
    Keep the ./ - it tells apt to install the file rather than look for
    a package by that name. apt pulls in Qt, Hamlib and FFTW. A stock
    jtdx package can't be installed alongside; apt offers to remove it.
  2. For CAT control over a USB serial cable, give your user access to
    serial ports once, then log out and back in:
    sudo usermod -aG dialout $USER
  3. Start JTDX-VU from the menu (Sound & Video / Ham Radio), or run
    jtdx in a terminal.

Upgrading: install the new .deb the same way; settings are kept.
Removing: sudo apt remove jtdx-vu.

Credits

Based on JTDX by Igor Chernikov UA3DJY, Arvo Järve ES1JA and the HF community. JTDX is itself derived from WSJT-X by Joe Taylor K1JT, Bill Somerville G4WJS, Steve Franke K9AN, Nico Palermo IV3NWV and others.

JTTY is by Joe Taylor K1JT, Steve Franke K9AN, Rob Sherwood G4KLA and the WSJT-X development group (WSJT-X 3.2.0-rc1, GPL v3). FT2 was created by Martino Merola IU8LMC (ARI Caserta), with Salvatore Raccampo 9H1SR as lead C++ developer; it first went on air in Decodium on 2026-02-16 (ft2.it), and MSHV by Hrisimir Hristov LZ2HV added it in 2.76.5 on 2026-03-24. JTDX-VU uses no Decodium code: its FT2 is JTDX's own FT4 chain, with MSHV's implementation as the reference. The band/mode buttons, the "show only new" filter and the DXCC colour scheme follow MSHV by LZ2HV. The QO-100 logging follows MSHV. The FlexRadio VITA-49 backend and panel are ported from the MSHV-Mac port's native Flex backend.