Repository navigation
JTDX-VU for VUCG v0.7.6. A double-clicked station keeps being called while he works others, a queue that calls as soon as the station is heard (or waits for his CQ), Ignore a caller, no repeat logging, LoTW user marks back, 160m crossband with India, and steadier FlexRadio and TCI transmit. Everything else is as in v0.7.5.
What's new in v0.7.6
- Double-click keeps calling a busy station. A station you double-click is called whether or not he is still in a QSO, as in WSJT-X and MSHV, until the Tx watchdog stops you. JTDX used to halt Tx as soon as he answered someone else, or drop him and call CQ when the Settings > Sequencing answer tries ran out. Reported by Miguel KK4CDK.
- The queue, two ways. Right-click a decode > Call CALL now (was Queue CALL): the station is called as soon as he is next decoded, whatever he is sending, and Enable Tx switches on by itself. Right-click a decode > Queue CALL (wait for his CQ), or right-click Halt Tx > Halt and queue CALL: he waits (in italics in the queue) and is called when he sends CQ or RR73 / 73.
- Ignore a station. Right-click a decode > Ignore CALL (never answer): AutoSeq never answers or calls him, for a caller who keeps calling after the QSO is logged. Kept per profile; the list shows under the queue.
- No repeat logging. A caller who missed your RR73 and keeps sending R+report no longer gets the QSO logged again for every RR73 sent back: automatic logging skips the same call, band and mode within 10 minutes. The Log QSO button still logs.
- LoTW user marks work again. The
•before the country of a station that uploads to Logbook of the World was never shown, because the list bundled with JTDX 2.2.159 ends in 2022. JTDX-VU bundles the October 2026 list, and Settings > General > Logbook of the World User Validation has the download URL, Fetch Now and the upload age. Reported by Miguel KK4CDK. - 160m crossband with India. Misc > Crossband 160m operation with India, beside JTDX's Japan and Korea options: on FT8 a station outside India on dial 1.808 transmits on 1.840, and an Indian station (VU, VU4, VU7) on 1.840 transmits on 1.808. Needs Split operation (Rig or Fake It); 1.808 FT8 is in the default frequency list.
- Wanted Call beep with New only. New only no longer hides a Wanted Call, so its beep sounds. Reported by Miguel KK4CDK.
- Background highlight off means no background anywhere - also on your own Tx lines, QSY lines and the marker cell before the country.
- macOS: no more quitting by itself. Random quits (exit code 2, no crash report) on Mac builds up to v0.7.5 came from Fortran string lengths passed with the wrong size.
- FlexRadio: a slow key-up no longer jumps to 14.100. A key-up the radio is slow to confirm skips just that over and keys again next cycle; any reconnect goes back to your frequency instead of the radio's default 14.100 slice. If the link dies mid-over, JTDX-VU closes its old session so the radio unkeys.
- FlexRadio copies 3 and 4 say when they can't transmit. The radio gives the third and fourth VITA-49 copies no transmit audio; they now say so on the status bar. For four transmitting copies, run them through SmartSDR and DAX. Seen on Miguel KK4CDK's FLEX-6700.
- TCI: transmit after a reconnect. A link drop in the middle of an over no longer leaves every later over silent (PTT keyed, no audio) until a restart. A frequency change the SDR program refuses (AetherSDR with an IC-705 dial lock) no longer drops the link mid-over.
- Apple Silicon Macs now need macOS 15 Sequoia (as Intel Macs already did): GitHub retired the macOS 14 build machines. On macOS 14 Sonoma, stay on v0.7.5.
- PSK Reporter lists the program as just "JTDX-VU v0.7.6", one row for every copy and rig.
Downloads
| Platform | File | Runs on |
|---|---|---|
| macOS, Apple Silicon | JTDX-VU-0.7.6-macos-arm64.zip |
macOS 15 Sequoia or later |
| macOS, Intel | JTDX-VU-0.7.6-macos-x86_64.zip |
macOS 15 Sequoia or later |
| Windows x64 | JTDX-VU-0.7.6-windows-x64.zip |
Windows 10 / 11, 64-bit |
| Raspberry Pi / Linux arm64 | jtdx-vu-0.7.6-linux-arm64.deb |
Raspberry Pi OS / Debian 12 (bookworm), 64-bit |
Each file has a matching .sha256 checksum. JTDX-VU installs alongside a
stock JTDX on macOS and Windows; on the Pi the package replaces a stock
jtdx package.
How to install
macOS (Apple Silicon or Intel)
- Download the zip for your Mac (Apple menu > About This Mac: "Apple
M…" chip = arm64, "Intel" = x86_64) and double-click it to unzip. - Drag JTDX-VU into Applications.
- First launch. The app is signed with a Developer ID and notarised
by Apple: double-click JTDX-VU and confirm the "downloaded from the
internet" question. - Allow the microphone when asked; that is how macOS names access to
your radio's sound card. If you clicked Don't Allow, turn JTDX-VU on in
System Settings > Privacy & Security > Microphone. - Shared memory (one-time, every Mac). The decoder needs more SysV
shared memory than the macOS default; without it JTDX-VU stops with
"Unable to create shared memory segment". In Terminal:That lasts until the next restart. To make it permanent, downloadsudo sysctl -w kern.sysv.shmall=32768 kern.sysv.shmmax=33554432
Darwin/com.jtdx.sysctl.plistfrom
this repo and run
sudo cp com.jtdx.sysctl.plist /Library/LaunchDaemons/.
It may need redoing after a macOS upgrade. - Set up your callsign, radio and audio in JTDX-VU > Settings…
(Cmd+,).
Upgrading: quit JTDX-VU, replace the app in Applications with the
new one. Settings
(~/Library/Preferences/JTDX-VU.ini) and data
(~/Library/Application Support/JTDX-VU) are kept.
Windows 10 / 11 (64-bit)
- Download
JTDX-VU-0.7.6-windows-x64.zip. Before unzipping,
right-click the zip > Properties, tick Unblock, OK; this saves
a warning for every file inside. - Right-click > Extract All… to a folder of your choice, for example
C:\JTDX-VU. No installer and no administrator rights are needed. - Run
bin\jtdx.exein that folder. If Windows SmartScreen says
"Windows protected your PC", click More info > Run anyway (the
program is not code-signed). Right-clickjtdx.exe> Send to >
Desktop (create shortcut) for a desktop icon. - If Windows Firewall asks, allow access on private networks (JTDX-VU
talks UDP to logging programs such as Log4OM, N1MM or JTAlert, and
receives a FlexRadio's audio over UDP). - For rig control through OmniRig, install
OmniRig separately. Hamlib, TCI
and the other rig interfaces are built in.
Upgrading: quit JTDX-VU and extract the new zip over the old folder
(or into a new one). Settings are stored in your Windows profile, not
in the program folder, so they are kept.
Raspberry Pi / Debian 12 (arm64)
Needs a 64-bit Raspberry Pi OS (Bookworm) or Debian 12 on arm64 - a Pi 4
or Pi 5 is recommended.
- Download
jtdx-vu-0.7.6-linux-arm64.deb, then in a terminal in the
download folder:Keep thesudo apt update sudo apt install ./jtdx-vu-0.7.6-linux-arm64.deb
./- it tells apt to install the file rather than look for
a package by that name. apt pulls in Qt, Hamlib and FFTW. A stock
jtdxpackage can't be installed alongside; apt offers to remove it. - For CAT control over a USB serial cable, give your user access to
serial ports once, then log out and back in:sudo usermod -aG dialout $USER - Start JTDX-VU from the menu (Sound & Video / Ham Radio), or run
jtdxin a terminal.
Upgrading: install the new .deb the same way; settings are kept.
Removing: sudo apt remove jtdx-vu.
Credits
Based on JTDX by Igor Chernikov UA3DJY, Arvo Järve ES1JA and the HF community. JTDX is itself derived from WSJT-X by Joe Taylor K1JT, Bill Somerville G4WJS, Steve Franke K9AN, Nico Palermo IV3NWV and others.
JTTY is by Joe Taylor K1JT, Steve Franke K9AN, Rob Sherwood G4KLA and the WSJT-X development group (WSJT-X 3.2.0-rc1, GPL v3). FT2 was created by Martino Merola IU8LMC (ARI Caserta), with Salvatore Raccampo 9H1SR as lead C++ developer; it first went on air in Decodium on 2026-02-16 (ft2.it), and MSHV by Hrisimir Hristov LZ2HV added it in 2.76.5 on 2026-03-24. JTDX-VU uses no Decodium code: its FT2 is JTDX's own FT4 chain, with MSHV's implementation as the reference. The band/mode buttons, the "show only new" filter and the DXCC colour scheme follow MSHV by LZ2HV. The QO-100 logging follows MSHV. The FlexRadio VITA-49 backend and panel are ported from the MSHV-Mac port's native Flex backend. Show US State uses US Census Bureau state boundaries and the FCC amateur licence database (both public domain), with the same rules as DXClusterAggregator's WAS lookup.