Configuration

Configuration

Edit /etc/gl-qos-vlan.conf on the router or use the setup wizard.

---

Main Settings

# WAN bandwidth limits (kilobits per second)
WAN_BW_UP=100000          # 100 Mbps upload
WAN_BW_DOWN=500000        # 500 Mbps download

# Traffic shaping mode
QOS_MODE=qos              # or 'sqm'

# Router model (auto-detected if not set)
QOS_MODEL=flint3          # flint2, flint3, flint4, slate7, slate7pro, beryl7, flint3e

---

Per-VLAN Limits

# LAN bandwidth (br-lan + tailscale0 combined)
QOS_LAN_BW_UP=200000      # 200 Mbps
QOS_LAN_BW_DOWN=500000    # 500 Mbps

# IoT devices (br-iot)
QOS_IOT_BW_UP=100000      # 100 Mbps
QOS_IOT_BW_DOWN=200000    # 200 Mbps

# Guest network (br-guest)
QOS_GUEST_BW_UP=100000    # 100 Mbps
QOS_GUEST_BW_DOWN=200000  # 200 Mbps

# Tailscale mesh
QOS_TAILSCALE_BW_UP=200000    # 200 Mbps
QOS_TAILSCALE_BW_DOWN=500000  # 500 Mbps

---

Advanced Settings

# Enable CAKE leaf qdisc on all classes
CAKE_ENABLE=1

# Persistence mode
PERSISTENT=1              # 0=disabled, 1=enabled

# Debug logging
DEBUG=0

---

Applying Changes

# Reload config
source /etc/gl-qos-vlan.conf

# Reapply QoS
/usr/local/sbin/glinet-vlan-qos.sh restart

# Or just stop/start
/usr/local/sbin/glinet-vlan-qos.sh stop
/usr/local/sbin/glinet-vlan-qos.sh start

---

Quick Reference

Command	Effect
qos.sh status	Show current settings
qos.sh detect	Show detected model
qos.sh start	Apply QoS
qos.sh stop	Remove all QoS
qos.sh restart	Stop then start
qos.sh uninstall	Remove all traces