Skip to content

Setup Wizard

Jump to bottom
Jarvis edited this page Aug 31, 2026 · 3 revisions

Setup Wizard

Run the setup wizard on your router:

glinet-vlan-qos-setup.sh

Wizard Steps

Step 0: Traffic Shaping Mode

  • QoS (default): WAN-rooted HTB with per-VLAN priority classes
  • SQM: CAKE diffserv at measured WAN bandwidth for bufferbloat reduction

Step 1: Router Model

Select your model or choose auto-detect:

  1. Flint 2 (GL-MT6000)
  2. Flint 3 (GL-BE9300)
  3. Flint 4 (GL-BE14000)
  4. Slate 7 (GL-BE3600)
  5. Slate 7 Pro (GL-BE10000)
  6. Beryl 7 (GL-MT3600BE)
  7. Flint 3e (GL-BE6500)
  8. Auto-detect

Step 2: Persistence

Install hooks that survive reboots and firmware upgrades:

  • Adds to /etc/rc.local for boot
  • Adds to /etc/gl-switch.d/vlan-qos.sh for network changes
  • Adds to /etc/sysupgrade.conf.d/ for firmware upgrades

Step 3: WAN Bandwidth

Set your actual WAN limits:

  • Upload (kbps)
  • Download (kbps)

Step 4: Bridge Priority

Assign priority (1-3, 1=highest) to each bridge:

  • br-lan (main LAN + WiFi)
  • br-iot (IoT devices)
  • br-guest (Guest network)
  • tailscale0 (Tailscale mesh)

Step 5: Summary & Apply

Review settings and apply. The script verifies qdisc and nft rules.

Uninstall

To remove QoS and all traces:

glinet-vlan-qos-setup.sh uninstall

Or directly:

/usr/local/sbin/glinet-vlan-qos.sh uninstall

This removes:

  • HTB qdiscs and CAKE leaf qdiscs on WAN and bridges
  • All fw filters and nft marks
  • /etc/gl-switch.d/vlan-qos.sh hook
  • /etc/rc.local QoS stanza
  • /etc/sysupgrade.conf.d/glinet-qos.conf
  • The scripts themselves from /usr/local/sbin/

Skipping the Wizard

# Set config manually
echo 'WAN_BW_UP=100000' > /etc/gl-qos-vlan.conf
echo 'WAN_BW_DOWN=500000' >> /etc/gl-qos-vlan.conf
echo 'CAKE_ENABLE=1' >> /etc/gl-qos-vlan.conf

# Apply directly
/usr/local/sbin/glinet-vlan-qos.sh start

Clone this wiki locally