Skip to content
This repository was archived by the owner on Sep 20, 2026. It is now read-only.

QK4 Mobile v1.0.4

Choose a tag to compare

@worldwidedx worldwidedx released this 04 Sep 04:19
· 17 commits to main since this release

QK4 Mobile v1.0.4

QK4 Mobile v1.0.4 adds extensive support for the CTR2-MIDI controller, new
straight-key options, and portable controller and function-key settings.

CTR2-MIDI control

  • Connect a CTR2-MIDI controller by USB or Bluetooth LE from its own dedicated
    CTR2 setup page.
  • Use the CTR2 at the same time as a separate TinyMIDI, HaliKey MIDI, or custom
    MIDI device connected through the CW Keyer page.
  • Start with a ready-to-use K4-Control-style mapping, then customize all eight
    knob modes and every button.
  • Assign different actions to short and long button presses.
  • Control frequently used radio functions including VFO A and B, volume,
    filters, NR, NB, RIT/XIT, squelch, RF power, CW speed, and panadapter zoom.
  • Mapped controls interact with the QK4 Mobile interface, not just the radio:
    when possible, pressing a button opens the corresponding on-screen control
    and shows visible feedback for the selected action.
  • Use the knob like a radio multifunction control: press a mapped button to
    open and select an adjustment such as NR, NB, filter bandwidth, or RIT/XIT,
    then turn the knob while watching the setting change on screen.
  • Assign buttons to built-in actions such as TX/RX, Rate, KHZ, and band changes,
    or enter supported K4 Programmer's Reference commands and command sequences.
  • Choose the normal or extended CTR2 button layout.

Portable controller settings

  • Save a complete CTR2 setup to a user-accessible mapping file on the phone
    and load it again later.
  • Copy CTR2 mapping files from the phone to a PC, edit or share their
    documented, human-readable contents, copy them back to the phone, and load
    them into QK4 Mobile.
  • Save and load complete F1-F8 function-key configurations, including both
    button labels and K4 commands. These files can also be copied to a PC,
    edited, shared, and copied back to the phone.
  • Receive a prompt before leaving a setup page or replacing a configuration
    when there are unsaved changes.

Additional CTR2 operation

  • Tune either VFO in the expected direction using that VFO's selected tuning
    step.
  • Make smooth, fine adjustments to radio controls and CW speed.
  • Zoom across the full panadapter range while keeping the tuned signal in
    place.
  • Disconnect and reconnect USB or Bluetooth MIDI devices without restarting
    QK4 Mobile.

Straight-key and external-keyer support

  • Use a straight key or external keyer with TinyMIDI, HaliKey MIDI, a learnable
    custom MIDI device, or CTR2-MIDI.
  • Hear a locally generated sidetone while using a straight key or external
    keyer.
  • Continue using the established Iambic paddle setup with its orientation,
    mode, weight, CW speed, sidetone, and paddle-test controls.
  • Use two connected MIDI devices as CW inputs without one device interfering
    with the other.