Skip to content

QK4 Mobile v1.0.5

Choose a tag to compare

@worldwidedx worldwidedx released this 20 Sep 19:37
· 175 commits to main since this release

QK4 Mobile v1.0.5 adds native FT8/FT4 operation, a shared ADIF logbook with QRZ integration, digital-mode TX calibration and protection, and improvements to CTR2-MIDI control, navigation, macros, and panadapter behavior.

QK4 Mobile v1.0.5 showing a confirmed FT4 QSO with DJ6OI

A confirmed FT4 QSO with DJ6OI at 14.080 MHz, showing measured reports, RR73, the live spectrum/waterfall, TX protection, and integrated logging.

FT8 and FT4

  • Receive and decode FT8/FT4 from the K4 Main RX audio stream.
  • Call stations or send CQ using standard timed transmissions.
  • Calculate signal reports automatically using the WSJT-X method.
  • Use the live spectrum/waterfall, independent RX and TX tone selection, received-traffic and My QSO views, common working frequencies, custom frequency entry, and RF power control.
  • Automatically select DATA-A, retain it while changing bands, and restore the operator's previous radio mode on exit.
  • Complete standard exchanges and log confirmed contacts.

Shared logbook and QRZ

  • Use one ADIF logbook from FT8/FT4, SSTV, and the main radio screen.
  • Review and edit callsigns before logging FT8/FT4 or SSTV contacts.
  • Long-press DXLIST to open the logbook from the radio console.
  • Add or edit contacts manually and import or export ADIF.
  • Configure automatic QRZ Logbook uploads or manually send unsent contacts.
  • Store QRZ credentials securely using Android Keystore encryption.
  • Record confirmed QRZ upload status and export the standard QRZ ADIF fields.

Digital-mode TX calibration and protection

  • Share one TX audio calibration between FT8 and FT4 for the same radio and audio-input setup.
  • Maintain a separate SSTV calibration.
  • Automatically adjust and remember program-audio drive using K4 ALC feedback.
  • Monitor K4 metering and audio headroom during transmission, reducing drive or stopping safely when required.

CTR2-MIDI and interface

  • Assign FT8/FT4: Switch RX/TX tone to a button's short press and FT8/FT4: Set tone frequency to its long press.
  • Use the assigned wheel to preview the selected RX or TX tone, then long-press the button to set it. Setting RX focuses My QSO; setting TX enables Hold TX.
  • Protect radio-frequency and tuning-step controls from accidental changes while adjusting digital tones.
  • Provide more activity-list space and selectable traffic density.
  • Make Android Back return through setup pages and nested editors without closing the application.

Radio display and synchronization

  • Refresh the complete displayed K4 state after an app or CTR2 macro.
  • Improve GPU panadapter rendering reliability.
  • Make touch input on Pan A tune VFO A and touch input on Pan B tune VFO B.

The QRhi rendering and per-pan touch-tuning corrections adapted from QK4-Android PR #3 were contributed by Fred Klassen.

Validation and scope

The release-signed ARM64 build uses Android version code 32. It has been tested on a Samsung Galaxy S26 Ultra with a live Elecraft K4. The captured FT4 screen documents a completed on-air exchange and the integrated logging workflow.

The Android tablet control layout and iPhone/iPad port derived from PR #3 remain in separate development branches pending their own build and physical-device acceptance. They are not included in the v1.0.5 Android phone APK.


The original QK4-Android v1.0.5 release remains available for historical dates and download counts.