Skip to content

Releases

Delta 1.8.7

Choose a tag to compare

@x3n01d x3n01d released this 19 Nov 22:13

Delta + Multiboot (v1.8.7)

English

Custom Delta firmware for the Quansheng UV-K1 / UV-K5 V3 (PY32F071).

Added

  • Multiboot — ported from F4HWN, so several firmware images can be installed
    and switched between at boot, with a safe restore of the selected image.

Fixed

  • TX power — the channel power field was widened from 2 to 3 bits, so MID (2W)
    and HIGH (5W) are now selectable and no longer truncated to LOW3. The USER
    level was removed; if a channel is set to it, it now falls back to HIGH (5W).
  • Power menu — changing Power in Settings → Radio no longer triggers a VFO
    reconfigure, so it no longer kicks you back to the main screen.
  • F Lock — the value is displayed again (no more "READ MANUAL") and UNLOCK ALL
    can be selected normally.
  • Power On Text = All — the welcome strings are truncated to the big-font width,
    so they no longer run off the screen.

Notes

  • Build for UV-K1 / UV-K5 V3 (PY32F071) only.

Русский

Кастомная прошивка Delta для Quansheng UV-K1 / UV-K5 V3 (PY32F071).

Добавлено

  • Мультизагрузка — портирована из F4HWN: можно установить несколько образов
    прошивки и переключаться между ними при загрузке, с безопасным восстановлением
    выбранного образа.

Исправлено

  • Мощность TX — поле power расширено с 2 до 3 бит, поэтому MID (2 Вт) и
    HIGH (5 Вт) выбираются и не обрезаются до LOW3; USER убран, при нём —
    HIGH (5 Вт).
  • Меню Power — изменение мощности в Settings → Radio больше не переконфигурирует
    VFO и не выкидывает на главный экран.
  • F Lock — значение снова отображается (без «READ MANUAL»), UNLOCK ALL
    выбирается нормально.
  • Power On Text = All — строки приветствия обрезаются до ширины big-шрифта и не
    вылезают за экран.

Примечания

  • Сборка только для UV-K1 / UV-K5 V3 (PY32F071).
Аннотация 2026-11-20 001113 Аннотация 2026-11-20 001146 Аннотация 2026-11-20 001248

Delta-1.8.7

Delta-1.8.7 Pre-release
Pre-release

Choose a tag to compare

@x3n01d x3n01d released this 05 Nov 21:55
14f1ba7

Delta + Multiboot

This release adds a firmware-level multiboot to the Delta firmware for the
Quansheng UV-K1 / UV-K5 V3.

Added

  • Multiboot — firmware slots stored in the external SPI flash (PY25Q16), with a
    boot-time selector.
  • Safe restore — the selected slot is copied back to the base address through a
    small RAM-resident stub (.mb_ramfunc), so an interrupted restore cannot leave the
    base image half-written.
  • Power On Text = All fix — the welcome strings are truncated to the big-font width
    so they no longer run off the screen.

Install

  1. Back up your codeplug and calibration.
  2. Flash deltafw.*.bin with your usual UV-K5 V3 tool.
  3. To install extra images: UV Studio → Firmware Slots, choose a slot, enter a
    Display name, and write the .bin.

Notes

  • Correct build for UV-K1 / UV-K5 V3 (PY32F071) only.
  • AES / other optional features are not part of this build.