Repository navigation
Delta + Multiboot (v1.8.7)
English
Custom Delta firmware for the Quansheng UV-K1 / UV-K5 V3 (PY32F071).
Added
- Multiboot — ported from F4HWN, so several firmware images can be installed
and switched between at boot, with a safe restore of the selected image.
Fixed
- TX power — the channel
powerfield was widened from 2 to 3 bits, so MID (2W)
and HIGH (5W) are now selectable and no longer truncated to LOW3. TheUSER
level was removed; if a channel is set to it, it now falls back to HIGH (5W). - Power menu — changing Power in
Settings → Radiono longer triggers a VFO
reconfigure, so it no longer kicks you back to the main screen. - F Lock — the value is displayed again (no more "READ MANUAL") and UNLOCK ALL
can be selected normally. - Power On Text = All — the welcome strings are truncated to the big-font width,
so they no longer run off the screen.
Notes
- Build for UV-K1 / UV-K5 V3 (PY32F071) only.
Русский
Кастомная прошивка Delta для Quansheng UV-K1 / UV-K5 V3 (PY32F071).
Добавлено
- Мультизагрузка — портирована из F4HWN: можно установить несколько образов
прошивки и переключаться между ними при загрузке, с безопасным восстановлением
выбранного образа.
Исправлено
- Мощность TX — поле
powerрасширено с 2 до 3 бит, поэтому MID (2 Вт) и
HIGH (5 Вт) выбираются и не обрезаются до LOW3;USERубран, при нём —
HIGH (5 Вт). - Меню Power — изменение мощности в
Settings → Radioбольше не переконфигурирует
VFO и не выкидывает на главный экран. - F Lock — значение снова отображается (без «READ MANUAL»), UNLOCK ALL
выбирается нормально. - Power On Text = All — строки приветствия обрезаются до ширины big-шрифта и не
вылезают за экран.
Примечания
- Сборка только для UV-K1 / UV-K5 V3 (PY32F071).
