Home

Akira is a wrapper around chiaki-ng to provide a GUI for using the chiaki-ng library to access the Playstation Remote Play protocol on the switch, enabling it to work as a Playstation client.

It uses a fork with some switch specific changes which I hope to upstream eventually, mainly around the cryptography section for PSN handshakes/connections. This fork is located here.

I previously did this in tree, however due to the amount of changes that I was making to this it was much better to take it out of tree than to break the .nro build for everyone. I should also point out that I don't own a ps4, so I don't know if it will work for it. Let me know!

Other custom libraries include a forked cURL with websockets enabled and the libNX VTLS work done by yellows8 to utilise libNX for cryptography purposes where possible.

As with Chiaki

• Make sure you have a good wifi network. having a 5G wireless network is insufficient, you need to have a good signal to it.
• The access point preferably be wired backhaul.
• Your router shouldnt be dropping packets due to load.
• Make sure that your ps4/5 is connected by ethernet. It is possible to stream via wifi, I have done it, but you need all of the above too.
• Make sure you dont have any rouge sysmodules that is consuming 100% of your core 3. This is very important.

In my tests using a clean emummc, I found that if you have some residual garbage from whichever hats pack of the day you want to use and your core 3 spikes to 100%, you will definitely encounter frame drops and stuttering.

Please only use a clean emunand from https://switch.hacks.guide/

Please read the wiki to the right.

Good luck!