[EMCAL-1118] Add scripts for EMCAL pedestal calibration run

DATA/production/calib/emc-pedestal-aggregator.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+source common/setenv.sh
+
+# ---------------------------------------------------------------------------------------------------------------------
+# Set general arguments
+source common/getCommonArgs.sh
+
+INPTYPE=""
+  PROXY_INSPEC="A:EMC/PEDDATA/0;eos:***/INFORMATION"
+
+CCDBPATH1="http://o2-ccdb.internal"
+CCDBPATH2="$DCSCCDBSERVER"
+if [[ $RUNTYPE == "SYNTHETIC" || "${GEN_TOPO_DEPLOYMENT_TYPE:-}" == "ALICE_STAGING" || ! -z $ISTEST ]]; then
+  CCDBPATH1="http://ccdb-test.cern.ch:8080"
+  CCDBPATH2="http://ccdb-test.cern.ch:8080"
+fi
+
+WORKFLOW=
+add_W o2-dpl-raw-proxy "--proxy-name emc-pedestal-input-proxy --dataspec \"$PROXY_INSPEC\" --network-interface ib0 --channel-config \"name=emc-pedestal-input-proxy,method=bind,type=pull,rateLogging=1,transport=zeromq\"" "" 0
+add_W o2-calibration-emcal-pedestal-calib-workflow
+add_W o2-calibration-ccdb-populator-workflow "--ccdb-path=\"$CCDBPATH1\" --sspec-min 0 --sspec-max 0"
+add_W o2-calibration-ccdb-populator-workflow "--ccdb-path=\"$CCDBPATH2\" --sspec-min 1 --sspec-max 1 --name-extention dcs"
+WORKFLOW+="o2-dpl-run $ARGS_ALL $GLOBALDPLOPT"
+
+if [ $WORKFLOWMODE == "print" ]; then
+  echo Workflow command:
+  echo $WORKFLOW | sed "s/| */|\n/g"
+else
+  # Execute the command we have assembled
+  WORKFLOW+=" --$WORKFLOWMODE ${WORKFLOWMODE_FILE}"
+  eval $WORKFLOW
+fi

DATA/production/calib/emc-pedestal-processing.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+source common/setenv.sh
+
+# ---------------------------------------------------------------------------------------------------------------------
+# Set general arguments
+source common/getCommonArgs.sh
+
+PROXY_INSPEC="A:EMC/RAWDATA;dd:FLP/DISTSUBTIMEFRAME/0;eos:***/INFORMATION"
+
+PROXY_OUTSPEC="downstream:EMC/PEDDATA/0"
+
+[[ -z $NEMCPROCPIPELINES ]] && NEMCPROCPIPELINES=2
+
+WORKFLOW=
+add_W o2-dpl-raw-proxy "--dataspec \"$PROXY_INSPEC\" --inject-missing-data --channel-config \"name=readout-proxy,type=pull,method=connect,address=ipc://@$INRAWCHANNAME,transport=shmem,rateLogging=1\"" "" 0
+add_W o2-calibration-emcal-pedestal-processor-workflow "--pipeline calibration-emcal-pedestal-processor-workflow:${NITSDECTPIPELINES}"
+add_W o2-dpl-output-proxy "--dataspec \"$PROXY_OUTSPEC\" --proxy-channel-name emc-pedestal-input-proxy --channel-config \"name=emc-pedestal-input-proxy,method=connect,type=push,transport=zeromq,rateLogging=1\"" "" 0
+WORKFLOW+="o2-dpl-run ${ARGS_ALL} ${GLOBALDPLOPT}"
+
+if [ $WORKFLOWMODE == "print" ]; then
+  echo Workflow command:
+  echo $WORKFLOW | sed "s/| */|\n/g"
+else
+  # Execute the command we have assembled
+  WORKFLOW+=" --$WORKFLOWMODE ${WORKFLOWMODE_FILE}"
+  eval $WORKFLOW
+fi

DATA/production/standalone-calibration.desc

@@ -1,3 +1,5 @@
+EMC-pedestal-calibration: "O2PDPSuite" reco,1,1,"production/calib/emc-pedestal-processing.sh" calib,1,"production/calib/emc-pedestal-aggregator.sh"
+
 FT0-time-offset-calibration: "O2PDPSuite" reco,5,5,"production/calib/ft0-timeoffset-processing.sh" calib,1,"production/calib/ft0-timeoffset-aggregator.sh"
 
 ITS-noise-calibration: "O2PDPSuite" reco,20,20,"NITSDECTHREADS=4 NITSDECTPIPELINES=6 production/calib/its-noise-processing.sh" calib,20,"NTHREADSACC=4 NTHREADSNORM=16 NITSACCPIPELINES=16 production/calib/its-noise-aggregator.sh"