You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
So i ordered a HSGQ GPON SFP (Both APC/UPC). i also bought a Mikrotik RB760IGS.
when i do cat /proc/cpuinfo, i get
login: admin
Password:
BusyBox v1.12.4 (2023-03-03 17:01:33 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# cat /proc/cpuinfo
system type : RTL8672
processor : 0
cpu model : 56322
BogoMIPS : 299.00
tlb_entries : 64
mips16 implemented : yes
#
now for the settings for the sfp stick i scoured the webui of my ONT router for information, i did get them and after setting all the settings, in webui of SFP stick -> PON settings, i got it to
ONU State : O0
ONU ID : 255
LOID Status : WRONG
but after some FAFO, i got it to
ONU State : O3
ONU ID : 255
LOID Status : WRONG
and for once and only once i did get to
ONU State : O5
ONU ID : 255
LOID Status : WRONG
but now i get only 03
thinking i wa missing something, i desoldered the NAND flash of my ONT router and read it, and i got everything. Opencode says, the configurations are mainly in a romfile.
here are some snippets of the romfile i thought were important.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
So i ordered a HSGQ GPON SFP (Both APC/UPC). i also bought a Mikrotik RB760IGS.
when i do
cat /proc/cpuinfo, i getnow for the settings for the sfp stick i scoured the webui of my ONT router for information, i did get them and after setting all the settings, in webui of SFP stick -> PON settings, i got it to
but after some FAFO, i got it to
and for once and only once i did get to
but now i get only
03thinking i wa missing something, i desoldered the NAND flash of my ONT router and read it, and i got everything. Opencode says, the configurations are mainly in a romfile.
here are some snippets of the romfile i thought were important.
and the info i acquired after scouring the router webui is as follows:
and after setting up the SFP Stick it looks like this:
and ONE more thing i cant seem to able to change the OMCC to the one from romfile.cfg. what should i do here?
and my router has these WAN settings:

all in all, i need your help to get this to work. any help will be appreciated.
All reactions