Publish via CloudCannon

docs/products/h2/faq.md

@@ -8,11 +8,11 @@ description: Frequently asked questions about the H-2.
 
 2\. **Can I customize the songs and LED effects?**
 
-* Yes! While the H-2 ships pre-loaded with four songs and light effects, you can integrate it with Home Assistant and ESPHome to further customize songs, LED patterns, and more. This makes the H-2 a versatile addition to your smart home holiday setup.
+* Yes! While the H-2 ships pre-loaded with four songs and light effects, you can integrate it with Home Assistant and ESPHome to further customize songs, LED patterns, and more. This makes the H-2 a versatile addition to your smart home holiday setup. You can also use the <a href="https://wiki.apolloautomation.com/products/general/piezo/" target="_blank" rel="noreferrer nofollow noopener">buzzer to play any song in Home Assistant</a>!
 
 3\. **Is the Apollo H-2 “smart” right out of the box?**
 
-* The H-2 is pre-flashed with a simple firmware that operates independently, allowing you to play songs with the gold button without needing any additional setup. For a full “smart” experience, you can connect the H-2 to Home Assistant, where you can program custom automations, change songs, and adjust LED effects.
+* The H-2 is pre-flashed with a simple firmware that operates independently, allowing you to play songs with the gold button without needing any additional setup. For a full “smart” experience, you can <a href="https://apolloautomation.github.io/H-2/" target="_blank" rel="noreferrer nofollow noopener">reflash the H-2 to the smart firmware</a> then join it to Home Assistant, where you can program custom automations, change songs, and adjust LED effects.
 
 4\. **How do I activate the pre-loaded songs?**
 
@@ -28,11 +28,11 @@ description: Frequently asked questions about the H-2.
 
 7\. **How do I set up the Apollo H-2 with Home Assistant?**
 
-* To integrate the H-2 with Home Assistant, follow getting started guide or reach out to our support team for assistance. Once connected, you can unlock additional functionality and customization.
+* To integrate the H-2 with Home Assistant,<a href="https://apolloautomation.github.io/H-2/" target="_blank" rel="noreferrer nofollow noopener"> reflash the sensor with smart firmware</a>.
 
 8\. **Does the ornament require any additional power source?**
 
-* The Apollo H-2 can operate on battery power, making it easy to hang and place wherever you'd like in your holiday decorations. It uses a [(rechargable) RC-CR123A aka 16340 battery (ideally 2800mAh or higher)](https://www.amazon.com/PAOWANG-Rechargeable-Capacity-Headlamp-Flashlight/dp/B0DF7T9YZ6). It can also be powered by the USB-C port. The H-2 USB-C port will NOT charge the battery, you need an external charger.
+* The Apollo H-2 can operate on battery power, making it easy to hang and place wherever you'd like in your holiday decorations. It uses a [(rechargable) RC-CR123A aka 16340 battery (ideally 2800mAh or higher)](https://www.amazon.com/PAOWANG-Rechargeable-Capacity-Headlamp-Flashlight/dp/B0DF7T9YZ6). It can also be powered by the USB-C port. The H-2 USB-C port will charge the battery very slowly.
 
 9\. **Can I gift the Apollo H-2 to friends or family?**
 
@@ -46,4 +46,4 @@ description: Frequently asked questions about the H-2.
 
 * For more details, setups, guides, and other products please email us at support@apolloautomation.com
 
-[Click here to join our Discord for fast support! :simple-discord:](https://dsc.gg/apolloautomation){                                    .md-button .md-button--primary }
+[Click here to join our Discord for fast support! :simple-discord:](https://dsc.gg/apolloautomation){                                     .md-button .md-button--primary }

docs/products/h2/introduction.md

@@ -2,12 +2,14 @@
 title: H-2 Introduction
 description: H-2 Introduction.
 ---
-![](../../assets/h-2-front-image.jpg)
+![](../../assets/h-2-image.png)
 
-The Apollo H-2 is our special holiday ornament, designed to bring festive cheer to your home while supporting a good cause. As the second in our annual series, this ornament is crafted with both functionality and community spirit in mind. All proceeds from the H-2 go directly to <a href="https://casaoflexington.org/" target="_blank" rel="noreferrer nofollow noopener">Casa De Lexington in Lexington, KY</a> and the <a href="https://www.openhomefoundation.org/" target="_blank" rel="noreferrer nofollow noopener">Open Home Foundation</a>, reflecting our commitment to giving back and celebrating the season alongside our community.
+**Can be powered by USB-C or battery.** Uses a 16340 or RCR123A **<u>rechargeable</u>** battery. The device can charge the battery directly via USB-C for convenient power management.
 
-The H-2 is pre-flashed with a playful firmware featuring four classic holiday songs. With just a press of the gold buttons on the back, you can enjoy the tunes with synchronized LED effects: one press for Sleigh Bells, two presses for Rudolph the Red-Nosed Reindeer, and long press for Let it Snow. Each song brings its own light show, making the H-1 both fun and festive right out of the box.
+The Apollo H-2 is the second edition of our annual holiday ornament! It's our way of saying thank you for your support and giving back to our community.
 
-For those looking to personalize their experience, the H-2 can also be integrated with Home Assistant, transforming it into a “smart” ornament. Through this setup, you can customize songs, LED effects, and create unique holiday automations to suit your style.
+The H-2 ships pre-flashed with a basic firmware featuring four classic holiday tunes. Simply press any of the four buttons on the back to play: Button 1 for Jingle Bells, Button 2 for Rudolph the Red-Nosed Reindeer, Button 3 for Let it Snow, and Button 4 for Blue Christmas. The LEDs light up with unique effects to match each tune!
 
-With the Apollo H-2, we’re blending holiday joy, smart home innovation, and community spirit into a single ornament, making it a perfect addition to any festive setup.
+You can also integrate it with Home Assistant to unlock more features, such as changing the songs and LED effects, bluetooth proxy, and bluetooth tracking. You will need to <a href="https://wiki.apolloautomation.com/products/h2/troubleshooting/h2-reflash/" target="_blank" rel="noreferrer nofollow noopener">reflash it to the smart firmware</a> first!
+
+**New for 2025:** The H-2 features four dedicated song buttons (no more multi-click!), upgraded ESP32-C6 processor with 8MB flash, 58 RGB LEDs (up from 22), USB-C charging, and a logo light for enhanced visual appeal.

docs/products/h2/getting-started.md → docs/products/h2/setup/getting-started.md

@@ -6,7 +6,7 @@ description: H-2 Getting Started tutorial.
 
 **1\. Powering On the H-2**
 
-Insert a rechargeable RC-CR123A (16340) battery, ideally 2800mAh or higher, such as <a class="decorated-link" href="https://www.amazon.com/dp/B0CSKD7N3D">this option on Amazon</a>.
+Insert a rechargeable RC-CR123A (16340) battery, ideally 2800mAh or higher, such as <a class="decorated-link" href="https://www.amazon.com/CBJJ-Battery-2800mAh-Rechargeable-Flashlight/dp/B0CL9N9XJ6" target="_blank" rel="noreferrer nofollow noopener">this option on Amazon</a>.
 
 ![](../../assets/h-2-insert-battery.webp)
 
@@ -21,16 +21,14 @@ After the ornament is awake, press the gold buttons (see image below) to play a
 * **Button 1:** Sleigh Bells
 * **Button 2:** Rudolph the Red-Nosed Reindeer
 * **Button 3:** Let It Snow
-* **Button 4:** White Christmas
-
-![](../../assets/h-2-front-image.jpg)
+* **Button 4:** Blue Christmas
 
 4\. **Add to Home Assistant** (Optional)
 
-For additional customization, you will need to flash the [smart H-2 firmware](https://wiki.apolloautomation.com/products/h1/code/) and then connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). With Home Assistant you can add new songs, change LED effects, and create custom automations.
+For additional customization, you will need to flash the [smart H-2 firmware](https://apolloautomation.github.io/H-2/) and then connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). With Home Assistant you can add new songs, change LED effects, and create custom automations.
 
 5\. **Enjoy Your Ornament**
 
 Hang the H-2 on your tree, place it on a mantel, or incorporate it into any holiday setup for added joy. Your Apollo H-2 is now ready to spread holiday cheer! Enjoy the festive tunes and LED effects, and feel free to share your unique setup with us in the community!
 
-[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){               .md-button }
+[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){                .md-button }

docs/products/h2/troubleshooting/boot-mode.md

@@ -0,0 +1,39 @@
+---
+title: Putting The H-2 In Boot Mode
+description: Step by step guide for putting The H-2 In Boot Mode.
+---
+!!! info "This will cover how to put the H-2 into boot mode."
+
+    This is needed to force the device into boot mode to reflash the firmware.
+
+## **Boot Button Only**
+
+!!! tip "Make sure that the battery is removed prior to putting it in boot mode"
+
+    Make sure that there is no battery in the device - the battery will prevent it from entering boot mode.
+
+1\. Disconnect your H-2 from power. With the device facing you, locate the boot button—it’s the small black button on the right.
+
+2\. Plug in a USB cable that supports power and data into your computer.
+
+3\. Push and hold the boot button (the right button). While still holding the button down, plug in a USB-C cable into the USB-C port of your H-2 then let go of the button.
+
+![](../../../assets/h-2-boot-mode-method-1-boot-button.webp)
+
+4\. You are now ready to reflash your device!
+
+[Click here to go to the reflashing guide!](https://wiki.apolloautomation.com/products/h2/reflash/){  .md-button .md-button--primary }
+
+## **Boot and Reset Buttons**
+
+1\. Plug in a USB cable that supports power and data into your computer and connect the other end to your H-2. With the device facing you, locate the reset (left) and boot (right) buttons.
+
+![](../../../assets/h-2-reset-and-boot-buttons-labeled.png)
+
+2\. Hold down the boot button (the right button), then press and release the reset button (the left button) while keeping the boot button pressed. Finally, release the boot button.
+
+![](../../../assets/h-2-boot-mode-method-2-boot-reset-buttons.webp)
+
+3\. You are now ready to reflash your device!
+
+[Click here to go to the reflashing guide!](https://wiki.apolloautomation.com/products/h2/reflash/){  .md-button .md-button--primary }

docs/products/h2/troubleshooting/reflash.md

@@ -0,0 +1,35 @@
+---
+title: Factory Re-Flash H-2
+description: Step by step guide for re-flashing the H-2 back to factory firmware.
+---
+# Reflashing The H-2
+
+!!! info "If your device becomes unresponsive and you've exhausted the other troubleshooting methods you can reflash the factory firmware by following the steps below."
+
+    This factory re-flash needs to be done in Chrome, Edge, or another Chromium based browser.
+
+1\. Disconnect your H-2 from power. With the device facing you, locate the boot button - it’s the small black button on the right.
+
+2\. Plug in a USB cable that supports power and data into your computer.
+
+3\. Push and hold the boot button (the right button). While still holding the button down, plug in a USB-C cable into the USB-C port of your H-2 then let go of the button.
+
+![](../../../assets/h-2-boot-mode-method-1-boot-button.webp)
+
+4\. Navigate to our installer page using a chromium based browser such as Chrome or Edge and click **connect** under **H-2 Smart Wi-Fi Firmware** or **H-2 No Wi-Fi Firmware**. Select the open com port and click **connect**.
+
+![](../../../assets/h-2-reflash-installer-connect.gif)
+
+5\. Click Install **H-2** then click **Install** again.
+
+![](../../../assets/h-2-reflash-install.gif)
+
+6\. Once you see "Installation complete!" you are finished. Click Next then close out of the browser window.
+
+![](../../../assets/pump-1-reflash-install-complete.png)
+
+!!! warning "Power cycle your device before doing anything else!"
+
+    Your device is still in boot mode and needs to be power cycled aka power removed to make it boot in a normal mode!
+
+[Head to the Getting Started article to setup your H-2 as a new device!](https://wiki.apolloautomation.com/products/h-2/setup/getting-started/){             .md-button .md-button--primary }

mkdocs.yml

@@ -444,13 +444,13 @@ nav:
       - H-2:
           - Introduction: products/h2/introduction.md
           - FAQ: products/h2/faq.md
-          - Getting Started: products/h2/getting-started.md
-          - Reviews: products/h2/reviews.md
+          - Getting Started: products/h2/setup/getting-started.md
+          - Reviews: products/h2/h2-reviews.md
           - Examples: 
             - Holiday Songs: products/h2/holiday-songs.md
           - Troubleshooting:
-            - H-1 Boot Mode: products/h2/troubleshooting/h2-boot-mode.md
-            - Factory Re-Flash H-1: products/h2/troubleshooting/h2-reflash.md
+            - H-2 Boot Mode: products/h2/troubleshooting/boot-mode.md
+            - Factory Re-Flash H-2: products/h2/troubleshooting/reflash.md
       - Apollo ODroid:
           - Introduction: products/apolloodroid/introduction.md
           - FAQ: products/apolloodroid/faq.md