Publish via CloudCannon

docs/products/h2/setup/getting-started.md

@@ -6,7 +6,7 @@ description: H-2 Getting Started tutorial.
 
 **1\. Powering On the H-2**
 
-Insert a rechargeable RC-CR123A (16340) battery, ideally 2800mAh or higher, such as <a class="decorated-link" href="https://www.amazon.com/CBJJ-Battery-2800mAh-Rechargeable-Flashlight/dp/B0CL9N9XJ6" target="_blank" rel="noreferrer nofollow noopener">this option on Amazon</a>.
+Insert a rechargeable RC-CR123A (16340) battery, preferably an 850 mAh model like <a href="https://apolloautomation.com/products/16340-rechargeable-battery" target="_blank" rel="noreferrer nofollow noopener">the one available in our store</a>. A normal CR123A will not work!
 
 ![](../../../assets/h-2-insert-battery.webp)
 
@@ -25,10 +25,10 @@ After the ornament is awake, press the gold buttons (see image below) to play a
 
 4\. **Add to Home Assistant** (Optional)
 
-For additional customization, you will need to flash the [smart H-2 firmware](https://apolloautomation.github.io/H-2/) and then connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). With Home Assistant you can add new songs, change LED effects, and create custom automations.
+For additional customization, you will need to <a href="https://wiki.apolloautomation.com/products/h2/troubleshooting/boot-mode/" target="_blank" rel="noreferrer nofollow noopener">put the H-2 in boot mode</a> then flash the [smart H-2 firmware](https://apolloautomation.github.io/H-2/) and finally connect to Home Assistant following the [setup guide](https://wiki.apolloautomation.com/products/general/setup/getting-started/). With Home Assistant you can add new songs, change LED effects, and create custom automations.
 
 5\. **Enjoy Your Ornament**
 
 Hang the H-2 on your tree, place it on a mantel, or incorporate it into any holiday setup for added joy. Your Apollo H-2 is now ready to spread holiday cheer! Enjoy the festive tunes and LED effects, and feel free to share your unique setup with us in the community!
 
-[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){                 .md-button }
+[Join our Discord if you need more help! :simple-discord:](https://dsc.gg/apolloautomation){                  .md-button }

docs/products/h2/troubleshooting/reflash.md

@@ -18,6 +18,8 @@ description: Step by step guide for re-flashing the H-2 back to factory firmware
 
 4\. Navigate to our installer page using a chromium based browser such as Chrome or Edge and click **connect** under **H-2 Smart Wi-Fi Firmware** or **H-2 No Wi-Fi Firmware**. Select the open com port and click **connect**.
 
+[Click here to reflash your H-2](https://wiki.apolloautomation.com/products/h2/troubleshooting/reflash/){ .md-button .md-button--primary }
+
 ![](../../../assets/h-2-reflash-installer-connect.gif)
 
 5\. Click Install **H-2** then click **Install** again.
@@ -32,4 +34,4 @@ description: Step by step guide for re-flashing the H-2 back to factory firmware
 
     Your device is still in boot mode and needs to be power cycled aka power removed to make it boot in a normal mode!
 
-[Head to the Getting Started article to setup your H-2 as a new device!](https://wiki.apolloautomation.com/products/h-2/setup/getting-started/){             .md-button .md-button--primary }
+[Head to the Getting Started article to setup your H-2 as a new device!](https://wiki.apolloautomation.com/products/h2/setup/getting-started/){              .md-button .md-button--primary }