2. Setup

Instructions baed on Arch Linux

• Download https://www.raspberrypi.org/downloads/raspbian (as of today the latest is 2017-03-02-raspbian-jessie.zip)
• unzip 2017-03-02-raspbian-jessie.zip -> creates 2017-03-02-raspbian-jessie.img
• sudo dd if=2017-03-02-raspbian-jessie.img of=/dev/mmcblk0 bs=8M oflag=sync status=progress -> should take approx 13 min
• Boot the Pi, connect to the Internet, if later you need to find the IP run this sudo arp-scan --localnet
• sudo apt-get update
• apt-get install libpython2.7-dev
• pip install http_parser
• ffmpeg

  • apt-get install libfontconfig1-dev

  • apt-get install libfribidi-dev

  • apt-get install libmp3lame-dev

  • apt-get install libx264-dev

  • sudo su

  • cd /usr/src

  • git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg

  • cd ffmpeg

  • Without GPU

    • ./configure --enable-gpl --enable-nonfree --enable-libx264 --enable-libmp3lame --enable-libfreetype --enable-libfontconfig --enable-libfribidi

  • With GPU

    • apt-get install libomxil-bellagio-dev
    • ./configure --enable-gpl --enable-nonfree --enable-libx264 --enable-libmp3lame --enable-libfreetype --enable-libfontconfig --enable-libfribidi --enable-omx --enable-omx-rpi

  • make -j4

  • make install

• git clone https://github.com/Autonomia/Autonomia-SDK-Python.git
  • cd Autonomia-SDK-Python
  • sudo python setup install