2. Setup

Download and Boot

• Download https://www.raspberrypi.org/downloads/raspbian (as of today the latest is 2017-03-02-raspbian-jessie.zip)
• unzip 2017-03-02-raspbian-jessie.zip -> creates 2017-03-02-raspbian-jessie.img
• sudo dd if=2017-03-02-raspbian-jessie.img of=/dev/mmcblk0 bs=8M oflag=sync status=progress approx 13 min, instructions based on Arch Linux
• Boot the Pi, connect to the Internet, if later remotely you need to find the IP then run this sudo arp-scan --localnet

Update & Dependencies

• sudo apt-get update
• sudo apt-get install libpython2.7-dev
• sudo pip install http_parser
• sudo apt-get install libfontconfig1-dev
• sudo apt-get install libfribidi-dev
• sudo apt-get install libmp3lame-dev
• sudo apt-get install libx264-dev

Build FFmpeg

• sudo su
• cd /usr/src
• git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg
• cd ffmpeg

Without GPU - ./configure --enable-gpl --enable-nonfree --enable-libx264 --enable-libmp3lame --enable-libfreetype --enable-libfontconfig --enable-libfribidi

With GPU - apt-get install libomxil-bellagio-dev - ./configure --enable-gpl --enable-nonfree --enable-libx264 --enable-libmp3lame --enable-libfreetype --enable-libfontconfig --enable-libfribidi --enable-omx --enable-omx-rpi

• make -j4 approx 30 min
• make install
• exit -> quit earlier sudo su

Install Autonomia Client SDK

• cd ~
• git clone https://github.com/Autonomia/Autonomia-Device-SDK-Python
• cd Autonomia-Device-SDK-Python
• sudo python setup.py install