SPARCStation 10 rejects ‚Identify‘

[ILAHWWINC]

I try to implanat a BlueSCSI v2 Desktop in a SPARCStation 10. This is described as difficult but i had some sucsess yesterday.
I could boot and install Solaris from a CD .iso file (CD60_512.iso) to a HD Image (HD30_512.hda).
But after autoreboot during installation the system hangs in bootloop with errors.
Today it is more worse, the HD Image shows errors as below. The CD Image tells „bad magic number“ and wont boot anymore.

Is this possibly a hardware problem? Is there a proper tutorial for Sun / BlueSCSI config?

[erichelgeson]

Please enable debug and attach the log, and be sure to completely go through the troubleshooting guide in the docs/wiki.

[ILAHWWINC]

log-hd-cd.txt
log-hd.txt

Here the logs. Only HD Image and HD Image + physical CDROM

[ILAHWWINC]

Solved the problem. Has been a hardware defect. With working hardware i had to put

MaxSyncSpeed=5

in the bluescsi.ini to avoid error messages.