ArrayBenchSingle

Table of Contents

• Turn on TOFPET
• Turn on xy tables

READ CAREFULLY BEFORE START

a) do not close the laptop screen when pc is on (do not touch also when it is sleeping)

b) do not unplug any of the USB cables either on the laptop or the switch on the table

Connect via X2GO

Open X2GO Client on one of the two PC at the desk

Make sure that session type is set to XFCE

Double click on ARRAY BENCH SINGLE

Turn on TOFPET

• Switch on the TOFPET power: press the green "POWER" button in the white power unit inside the rack; the voltage is set by default to 12V.
• Wait about 30 seconds for the system to warm up, until the current measured by the power unit is 1.62.
• Connect TOFPET to pc: OPEN NEW TERMINAL

cd /home/cmsdaq/Workspace/TOFPET/Timing-TOFPET2/
./connect_TOFPET.sh

Note: keep this terminal always open.

Turn on CNC Motor