Skip to content

User guide

Jump to bottom
Gregory Sastrawidjaya edited this page May 29, 2021 · 15 revisions

Introduction

Welcome to the official AlSet user guide! In order to ensure a safe, reliable, and enjoyable driving experience, please read this manual carefully. Thank you for choosing our product.

Prerequisites

  • Android Studio
  • Android device

AlSet was developed on both Windows and MacOS. Therefore, support for these two platforms are provided below to ensure a quality user guide.

Windows/MacOS Installation Guide

Logging in

This is the AlSet login page. AlSet takes in a username and password as credentials for your car. These credentials were provided to you upon purchasing your AlSet, but if you are here to try out the functionalities of the car and its authentication features, a demo account has been provided below:

demouser@alset.com
password

Additionally, you can simply click on Debug Mode to access the car without any username or password. If this mode is used, all settings will be saved locally rather than on the cloud.

Main Menu

Welcome to the AlSet Main Menu. This is where you can see an overview of your car and tweak it to your preferences. The battery meter provides an at-a-glance view of your phone's battery in order to ensure that your phone is charged during operation of this vehicle.

Additionally, you may tweak the driving sensitivity of your AlSet by choosing from ten different settings on the slider. Five is the default.

WARNING: Zero is not recommended at all, you will be unable to turn your car at all

Once you are satisfied with the settings you have provided to the app, they will be saved on the cloud or locally, depending on what login you used. You can then click on Drive! in order to begin driving!

If you would like to log out, click on in the top right corner of the screen.

NOTE: AlSet does not support more than one active user session. If you forget to logout and you run AlSet on a device other than the one you forgot to log out on, your AlSet is considered MIA and you will have to send a support ticket to the dev team.

Drive Screen

Here is your AlSet. Initially, your car is set to Park Mode, denoted by the P and D icons. A battery meter at the middle provides you with up to date knowledge of your phone's battery in order to ensure that your phone is charged during operation of this vehicle.

Before operating your AlSet, please ensure that the Arduino sketch is compiled and started on SMCE-gd and that you have set up your MQTT properly. SMCE-gd must run concurrently with the app. Failing to do so will provide you with incomplete functionality of your AlSet.

If this has all been done, set your car to Drive Mode by clicking on D. You will be greeted with a camera view of your car, as well as different functionalities starting up.

In order to drive your car, use the joystick and actuate it based off of where you want the car to go. AlSet also supports voice recognition, which is accessed through a simple tap of the Microphone button. Several keywords are supported, namely:

  • "AlSet, go forward"
  • "AlSet, reverse"
  • "AlSet, stop"
  • "AlSet, speed X" where X is the speed setting
  • "AlSet, turn left/right"

Remember to drive safely and follow all rules and regulations!

Clone this wiki locally