Flo Usage
The Printer Overview provides a quick way to track the current temperatures and power consumption* of all configured heaters as well as the overall printer status.
Heaters List
| Heaters List |
|---|
 |
| Shows a list of all heaters and their current on/off status |
Power Graph
| Power Graph |
|---|
 |
| Shows the current power draw of each heater over time |
Power Breakdown
| Power Breakdown |
|---|
 |
|
Current Power: The instantaneous power draw of all heaters Average Power: This is the average power draw of all heaters (including off time) for the current month** Total Power: This is the total kWh draw of all heaters for the current month** |
Printer Status
| Printer Status |
|---|
 |
The overall printer status. If there are any configuration issues, the message will be displayed here |
Temperature Graph
| Temperature Graph |
|---|
 |
Shows the current temperature of each heater over time |
*The power profile needs to be setup in order to accurately track consumption. This can be set by editing the printer details on the Application Settings Page
**Average and Total power consumption is only tracked while the app is active and connected.
Flo will create an individual Extruder Toolbox Page for each configured extruder.
Temperature Graph
| Temperature Graph |
|---|
Shows the current temperature of the extruder over time |
Extruder Settings
| Temperature Graph |
|---|
Shows the current temperature of the extruder over time |
Extruder Tools
Extruder Details
| Temperature Graph |
|---|
Shows the current temperature of the extruder over time |
Spoolman Data
| Temperature Graph |
|---|
Shows the current temperature of the extruder over time |
Extruder Gauges
| Temperature Graph |
|---|
Shows the current temperature of the extruder over time |
There are two widgets provided on the Printer Page that allows you to control the positioning of the toolhead.
| Toolhead Control Widget | Absolute Position Widget |
|---|---|
 |
 |
The Toolhead Control Widget provides a CNC-like control for toolhead positioning. It will move the toolhead in the requested direction by the amount specified in the distance selector at the bottom of the widget. The distance selector has 1/5/10/100 mm selections built in, but the amount can be edited as required. |
The Absolute Position Widget provides precise control over the exact coordinates that are required. |