-
Notifications
You must be signed in to change notification settings - Fork 3
Home
Welcome to the em-control-box wiki!
These pages contain the documentation for our Electronic monitoring system.
Some instructions in this wiki only apply to specific versions of the hardware or software, and such cases will be noted. Currently two hardware (Control Box) version numbers are deployed, noted as V1XX and V2XX. Two major versions of the software exist noted as (SW V1) and (SW V2).
The technician Wiki pages are designed to provide support to the Ecotrust Technician during EM Box Installation and service. Sensor troubleshooting and the linux commands needed to maintain a system which collects data effectivly are covered in this wiki. You will also find wiring diagrams related to the system and sensors included within this guide.
The EM system consists of a control box and several peripherals. This document will list a set of tools recommended for use in an EM installation kit. It describes the connectivity required for a functioning EM system, and suggests a workflow for troubleshooting issues encountered during installation.
We hope that any problems that arise can be addressed with the help of this manual. In the case of an event not covered or clearly in this manual, please contact your port supervisor, lead technician or development team.
Thank you for helping Ecotrust provide service that exceeds standards in the electronic monitoring industry.
Good Luck. Have fun!
Installation - steps for outfitting a new boat with a sensor system and control box.
Servicing - useful knowledge for technicians who maintain systems on boats.
Troubleshooting - common issues and resolutions.
Legacy - extra docs specific to our legacy software
The Electronic Monitoring System is open sourced under the GPL, with code publicly available in this GitHub repository. Check out the project homepage for basic information on building the software.
Developing - more technical docs for those who work on the EM Control Box Software, and as a reference to technicians.
Assembling - information pertaining to the hardware on which the EM software is intended to run.