- Ortholinear 4x12 grid
- Extra right-side slider potentiometer
- Pro Micro (USB-C) placed top-right under the slider
- Base firmware: QMK
- Configurable with VIA or Vial
- Potentiometer support included in firmware (mapped as analog input) (soon just give me the time to add it)
- Sandwich case (DXF / SVG files included)
- 3D printed case (not tested) (STL files included)
- Flash QMK firmware to your Pro Micro (USB-C).
- Assemble PCB with switches, diodes, and potentiometer.
- Mount in sandwich or 3D printed case.
- Configure keymap in VIA/Vial or recompile with QMK.
| Row / Col | Pin |
|---|---|
| Row 0 | D0 |
| Row 1 | D1 |
| Row 2 | D2 |
| Row 3 | D3 |
| Col 0 | D4 |
| Col 1 | C6 |
| Col 2 | D7 |
| Col 3 | E6 |
| Col 4 | B4 |
| Col 5 | B5 |
| Col 6 | B6 |
| Col 7 | B2 |
| Col 8 | B3 |
| Col 9 | B1 |
| Col 10 | F7 |
| Col 11 | F6 |
(Pro Micro USB-C top-right under the slider)
- 💡 Backlight LEDs under switches
- 🔔 Layer indicator LEDs (different colors per layer)
- 🔄 Hot-swap sockets (instead of soldering switches directly)
- 📏 SMD components (instead of THT for a cleaner build)
- ✨ Edge/sandwich LEDs between plates for an underglow effect
- 🎛️ Extra potentiometers or rotary encoders for more controls
- MiPSR → inspiration, guidance, and shared knowledge :3