Skip to content

Requirements for using the FOSDEM video system externally

Jump to bottom
Mark Van den Borre edited this page Feb 24, 2019 · 41 revisions

You'll need:

  • power
  • a quiet video operations control room
  • a reliable network uplink
  • a reliable wired network or tools to build one
  • camera gear: tripod, camera, hdmi or sdi cables
  • audio gear: lavallier microphones for speakers, wireless hand microphones for audience questions and panel discussions
  • preparation time
  • projectors
  • (optional) tested laptops

Let's go over all of these in more detail.

Power

The FOSDEM video boxes are on a 110v/230v power supply with CEE 7/7 plug. Any other gear requiring mains power that we bring is equiped with a 230v https://en.wikipedia.org/wiki/Europlug .

Our microphone sets (see below) are micro USB powered. You may want to get a few local high quality, high amperage multi-port USB chargers.

HINT: We use the IKEA Koppla 3x USB chargers. They're cheap, decent quality and easily available in much of the world.

A video operations room

Not required when streaming just one room. Highly recommended otherwise.

In this room, we need space for:

  • a desk for two people and their laptops
  • a well ventilated household rack for streaming gear (video processing laptops, backup system, network switches, ...). We recommend the IKEA Omar 92x36x94 cm metal shelving rack if available in your corner of the world. It's cheap, decent quality, offers excellent venting, and stores compactly. One Omar rack will suffice for up to 8 rooms.

Network

Don't worry if you don't immediately understand the below section. Ask the venue network administrator for help. Lacking that, consult with us and we'll do our best to help you the best we can.

Uplink

Our ideal setup requires:

  • a separate vlan for video streaming
  • 10 Mbit of outgoing bandwidth ("upload speed") per room streamed
  • on a multihomed uplink
  • wired network access to our vlan from all rooms streamed

We can do with less. Our minimum is 2Mbit per room, but that sacrifices resilience. You lose:

  • external dumps of the individual slides (2Mbit), camera (2Mbit) and mixed (2Mbit) streams
  • backup streaming server (2Mbit)

We need the video network and uplink separated from the visitor wifi network. Thing might or might not work without that separation. We just can't guarantee anything because we're not in control.

Wired network

If no wired network is available, we strongly prefer setting one up. If we're driving, we bring our own gear. In case we're flying in, we need:

  • 3x RJ45 crimping tools
  • 1x good quality cable testers
  • 3x 100 RJ45 plugs
  • 3x 305m roll of cat5e cable (or more, depending on the venue layout)
  • helping hands with some crimping experience

HINT: In case no wired network and/or wired uplink is available at all, for streaming just one room, a 4g uplink can often be just manageable. No guarantees though, as 4g spectrum can be congested, especially at tech conferences!

Audio gear

  • lavallier microphone. We highly recommend the Sennheiser AVX ME2 lavalier microphone. There are five variants of this product available, each license free in its specific area:
    • EU (Sennheiser product code 505851)
    • UK (Sennheiser product code 505855)
    • US set 4 (Sennheiser product code 505861)
    • AU (Sennheiser product code 506155)
    • LA (Sennheiser product code 506158)
    • US set 5 (Sennheiser product code 505867)
  • hand microphone. We highly recommend the Sennheiser AVX ME835 hand microphone. There are four variants of this product available, each license free in its specific area:
    • EU (Sennheiser product code 505853)
    • LA (Sennheiser product code 506159)
    • US (Sennheiser product code 505863)
    • UK (Sennheiser product code 505857)

Clone this wiki locally