INSTALL:

• Make your own PCB
• Burn firmware
• Connect wires (take a look in PCB files)
• Press On/Off button to start Raspberry Pi
• Copy RPiSU.sh to users home dir
• Execute 'sudo chmod 766 /home/users home dir/RPiSU.sh'
• Add command '/home/user/RPiSU.sh &' above 'exit 0' in /etc/rc.local
• Reboot

Forked from original at: https://github.com/schmron/RPiSU

You need a Tiny45/85 or other AVR (Arduino, Freeduino, Seeeduino,...), Relay (5V, 150Ohm), USB-Micro-Cable (or USB[/code] breakouts) and some Transistors, LEDs, Capacitors, Resistors, etc

Pinheader USB: pin 1 = 5V pin 2 = GND pin 3 = (D+) not used pin 4 = (D-) not used