Can't run into the bootloader on 7390 https://docs.github.com/en/site-policy/github-terms/github-community-guidelines#legal-notices

[HostXnine]

May I now ask why it's not going to connect to the bootloader? There should nothing be wrong with the connection. I'm using a VM with VirtualBox using Linux Mint 21. For the connection I'm using a bridge connection so it connects directly to my host's network card and to the box. I'm using a cable and I've also factory reset the box. Didn't configured anything on the box after the reset so it's a completely vanila AVM environment. Stating all of this it should work, I don't know why it's not. Is there an issue with the code?

Kann ich jetz fragen warumm can ich nich einve verbindung erstellen mit dem bootloader?

(I'm from Slovenia but can speak and understand German and English but I prefer English much more)

Thank you in advance for your kind help.

jan@jan-VirtualBox-mint:~/freetz-ng$ tools/push_firmware -ms

 * Using command: ncftpput
 * Target host: 192.168.178.1
 * Outgoing IP: 192.168.178.21
 * Flash mode: single-boot

 !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!
 !!!  THERE IS NO WARRANTY AT ALL !!! USE AT YOUR OWN RISK   !!!

 * Are you sure, that you want to flash this file to the device?
   images/7390_06.87.int_freetz-ng-21589-4c08dd921_20230520-224344.image
   Proceed? (y/[n]) y

 * You should now reboot your box (192.168.178.1). Waiting for shut down.
   Switch off, if reboot is not detected because it happens too quickly.
   Some newer bootloader versions allow to flash on power-cycle only.
   .....................
 * No reply from box, assuming switch-off or restart. Trying to re-detect box.
   Waiting .................................................... found!

 * Box is back up again, initiating transfer.

LibNcFTP 3.2.5 (January 17, 2011) compiled for linux-x86_64-glibc2.31
Uname: Linux|jan-VirtualBox-mint|5.15.0-71-generic|#78-Ubuntu SMP Tue Apr 18 09:00:29 UTC 2023|x86_64
Contents of /etc/debian_version:
  bookworm/sid
Contents of /etc/issue:
  Linux Mint 21.1 Vera \n \l
  
Glibc: 2.35 (stable)
Could not connect to 192.168.178.1: Connection refused.
Sleeping 20 seconds.
Retry Number: 1
Could not connect to 192.168.178.1: Connection refused.
Sleeping 20 seconds.
Retry Number: 2
Could not connect to 192.168.178.1: Connection refused.
ncftpput: cannot open 192.168.178.1: remote host refused connection.
jan@jan-VirtualBox-mint:~/freetz-ng$ 

What is wrong with you?! Can't I just ask for help?

[HostXnine]

here is my ifconfig which proofs there shouldn't be a problem with the connection

jan@jan-VirtualBox-mint:~/freetz-ng$ ifconfig
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.178.21  netmask 255.255.255.0  broadcast 192.168.178.255
        inet6 <deleted>  prefixlen 64  scopeid 0x20<link>
        ether <deleted>  txqueuelen 1000  (Ethernet)
        RX packets 6092  bytes 5174485 (5.1 MB)
        RX errors 0  dropped 40  overruns 0  frame 0
        TX packets 3812  bytes 564523 (564.5 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 2904  bytes 256550 (256.5 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2904  bytes 256550 (256.5 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

jan@jan-VirtualBox-mint:~/freetz-ng$ 

[fda77]

1 you open #797
2 you open https://www.ip-phone-forum.de/threads/315399/
3 you open this
4 bye