Installation Materials Checklist

These checklists are designed to provide a list of recommended materials and tools needed to install an eMOLT system on a commercial fishing vessel. Not all materials and tools are necessary in all installations because every vessel is different. If you run into a scenario where you need additional tools or materials not covered by this checklist, please let us know so we can make the list more comprehensive

Tools

Reusable, bring these to the boat and bring them home again

• Power drill (preferably battery powered)
• Charged batteries
• 1/2" Drill Bit
• Heat gun
• Lighter
• Philips screwdrivers (sizes P0 - P4)
• Flat head screwdrivers (sizes 1/8 and 3/16)
• Side cutters (large and small)
• Utility knife
• Replacement blades for the utility knife
• Bicycle pump
• Pressure chamber (Click here for instruction on how to build one)
• USB WIRED keyboard (NOT wireless)
• USB WIRED mouse (NOT wireless)
• 7/16" wrench x2 or a 7/16" wrench and a 7/16" ratchet/socket (extras are always good)
• Multimeter
• Pliers
• Needle nose pliers
• Wire cutters
• Scissors
• Adjustable wrenches (small and medium)
• Hex drivers (5 mm and 4.5 mm)
• Wire strippers / crimpers
• 120V AC extension cord reel
• Tweezers
• Nut driver (5/16")
• Laptop
• Mobile phone with hotspot capability or Mobile hotspot

Equipment

What you're actually installing

• Deckbox
• AC Power Supply with USB-C Cable
• DC Voltage Converter
• Extra-long (~10') USB-C Cable
• Logger(s)
• Housing(s)

Consumables

Stuff you'll use up eventually. Keep a bunch of this on hand

• Double stick tape
• Velcro strips
• Stainless steel 1.25" self tapping screws
• Zip ties (several sizes, UV resistant)
• Marine heat shrink wrap
• Dielectric grease
• Paper towels
• Electrical tape
• 8x L91 Lithium AA batteries
• Micro fuse (3 Amp, glass)
• Stainless steel fender washers
• Thumb nuts

Spare Parts

For servicing deckboxes and loggers in the field

• 32 GB SSD preinstalled with DDH Software
• SSD to USB adapter
• Raspberry Pi 4 Model B
• Juice4Halt board
• USB A to micro b cable (4")
• USB A right angle to micro b right angle (4")
• External Bluetooth USB Cable Assembly (25' - 100')
• External GPS Antenna Assembly
• Replacement legs for deckbox
• Replacement mounting plate for deckbox