Rad Pro 3.0.1: Release

[Gissio]

It is my pleasure to announce the release of Rad Pro 3.0!

Bosean FS-600/Bosean FS-1000/Bosean FS-5000/GQ GMC-800 users: If you have Rad Pro 3 installed, you can use the Rad Pro web installer to update the firmware.

https://github.com/Gissio/radpro/releases/tag/3.0.1

Updates:

• Removed the charging indicator on the FNIRSI GC-01 due to hardware limitations preventing differentiation between USB disconnected and USB charging states.
• Resolved an issue where the battery indicator failed to display during power-off on the Bosean FS-5000.
• Improved battery indicator response time.

---

This discussion was created from the release 3.0.1 "The glow fix".

[Ilja-code-art]

Thanks for your job!!!

[dmitrihaifa-max]

really great work! my fs-5000 became just a scientific tool, and each update makes nice surprises :)
only one question - is it possible to make prompt stop, like "are you sure?" before delete data ? now is just one long press on left button, and it's easy to delete records by mistake. (Bosean fs-5000)
anyway - thanks for your time and efforts !

[Gissio]

Instantaneous rate, average rate and cumulative dose views are designed for short-term monitoring.

Starting with 3.0, Rad Pro logs everything in the background, so you can calculate cumulative dose from these logs. Note that regular Geiger tubes are not energy-compensated, which may result in significant measurement errors.

You can also use lock mode to avoid unintended changes.

[peshka110]

Good day. I wanted to clarify when the history scale runs, should the numbers on top or bottom change to see how many readings there were at that time. My numbers just stay unchanged. Everything is very convenient and understandable, thank you for your work.

[Gissio]

The scale is always set to multiples of ten for easier reading. Expose your counter to a radiation source, and you’ll see how the scale dynamically adjusts.