Adding controls

[Haluska77]

from @ondrey1000

Hi,

Firstly, thank you for this useful integration as I couldn't find anything for Regulus heatpump so far.

Unfortunately, I encountered same problem, I use IR12 regulator, values for particular sensors are completely random, I have different values then you both. So all sensor are shown as unavailable in home assistant, I tried to change some values in mapper according to my page file and then they showed in home assistant. So it seems everyone needs its "own" values in mapper.

Just one question, this integration is only showing sensors, would it be possible to add also some controls/switches in the future? For example changing temperatures, turning zones on/off etc would be useful for some HA automations.

Thanks

[Haluska77]

[Haluska77]

@ondrey1000 new controls have been added to release version 2.0.0. Mapper for IR14_1_0_10_0 has been extended by new apis. If you are able to provide me with your correct mapper for IR12, paste it here. IF not, let me know, I can guide you how to parse correct registry names from your device

[ondrey1000]

Hi @Haluska77, thanks a lot, I just tried it works pretty well. I was able to search for and remap the registers I needed somehow (by trial and error), but if you could give me a hint, how to parse correct registry names effectively, I would be grateful.

Just couple of observations, setting values entities look like this in HA.

Would it be possible to make it look like this, so you could enter the value, not just move the slider?

Second observation, temperature can be set only by the whole numbers (e.g 26,27,28). Would it be possible to set it also in decimals (like 26.5)?

[Haluska77]

For getting correct registry names you need:
xml file - open it as 'Source code' from your page eg: zo_z1.xml - contains list of all registry names with corresponding values in xml format
xsl file - open it from 'Network' tab in Developers console (F12) - contains business logic, represents pairing elementId - xml row

It is graphically exposed in the picture:

When you get every element from page, put it into a mapper for your IR12 version.

[ondrey1000]

Thank you, I get the logic now.

[Haluska77]

are you able to finish the mapper?

[ondrey1000]

Yes, works very well. Thanks

[Haluska77]

nice. Pls. make a PR or paste it here to include it into project also with other small fixes in one release

[ondrey1000]

registry_mapper_ir12.py
This is my mapper, not all registers are updated as I don't have all sensors, so I updated only the ones I use, but I would say that 70% is updated according to my IR12.

[Haluska77]

which plc version do you use (at the bottom of the every page) eg: IR12CTC v1.0.10.0 ?

[ondrey1000]

you mean this?

[Haluska77]

fixed in release 2.0.1