Long-running agent turn stops before executing its explicitly stated next tool action and requires manual “continue” #6010

hxfhd · 2026-09-08T10:03:18Z

hxfhd
Sep 8, 2026

Environment
CodeWhale: v0.9.12
OS: Windows
Mode: Agent
Workload: long-running repository engineering / PowerShell test-fix-validation loop
Local OpenAI-compatible inference endpoint
Reproduced with:
DeepSeek-V4-Flash-Vision-Exp
DeepSeek-V4-Flash 0731
Problem

During long-running engineering tasks, the model remains coherent, has already determined the next required action, and does not require any human decision.

However, the current CodeWhale turn terminates before the corresponding tool call is executed.

Execution only resumes after the user sends a new message such as:

“continue”

Concrete reproduction

The following occurred during a long repository validation task.

A test suite returned:

GROUP_TREE_RESULTS pass=2 total=4 fail=2

The model correctly diagnosed that the process containment Job Object did not cover the full spawned process tree.

It then:

inspected the relevant PowerShell functions;
updated the test/harness hook so newly spawned layers were assigned into the containment Job Object;
fixed the relevant kill-failure signature;
syntax-checked the updated PowerShell;
checked for stray processes;
confirmed no stray processes remained.

The final model statement was:

“Now re-run the tree suite with the job-assignment fix:”

At that point, the next action was deterministic and no user input was required.

However, CodeWhale did not issue the corresponding run tool call. The turn ended.

Sending a new user message asking it to continue caused the task to resume.

Cross-model reproduction

The same class of interruption has now been observed with both:

DeepSeek-V4-Flash-Vision-Exp
DeepSeek-V4-Flash 0731

This makes a model-specific explanation less likely.

The shared component is the CodeWhale long-running agent/session loop.

Expected behavior

When:

authorized work remains;
no user decision is required;
no credential or safety boundary requires intervention;
the model has explicitly identified the next tool action;
and there is no fatal provider/runtime failure;

CodeWhale should either:

execute the tool action;
compact and continue;
or terminate with an explicit visible stop reason.

It should not silently end the turn and require a semantically unnecessary user “continue” message.

Requested diagnostics

It would be very useful if this condition exposed:

agent stop reason;
current step count;
configured/effective step budget;
whether the soft-landing threshold was reached;
model finish reason;
current context utilization;
whether compaction was attempted;
whether a report-on-exhaustion turn ran;
whether CodeWhale intentionally suppressed the next tool call.
Additional observation

This issue is distinct from model/runtime inference stability.

In both reproduced cases, the model remained coherent and retained task state. After manual continuation, work could proceed normally.

The failure mode appears to be the agent turn ending while actionable work still remained, rather than model context loss or inference failure.

logs
TASK_ID:
A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_0731_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1

TASK_TYPE:
OPERATOR_REPORT_CORRECTION_AND_OFFLINE_TEST_ONLY

EXECUTION_MODEL:
DeepSeek-V4-Flash 0731 standard, non-Vision
若界面无法证明具体 revision，报告中必须写 MODEL_REVISION=NOT_VERIFIED，不得猜测。

INPUT_VERIFICATION:
branch=phase/00b-2b2b-serial-executor-contract
HEAD=42491f66c5df4402a949010ead4372c946b53e68
staged=0

R4_R4 deliverables.zip:
SIZE=5237770
SHA256=b1ed66788c26a5c0d2348ce3e200ad727aba310fddb8422bb370fef631bafe6f

R4_R4 report:
SIZE=8448
SHA256=baebaa749b0072f0a983cc08681d6af07617b39abfa2721e8b88188e5070195c

operator_bundle.zip:
SHA256=ee7da9ec9b86331e464e5c35d250f470333e163ffdff93ddc85b339662bc3b80

acceptance_evidence.zip:
SHA256=f87a324235889bad6f4992eae8a900f002d61eb02cbf17b1061a146306982acc

positive_product_evidence.zip:
SHA256=a256b11f8884eda6027d59a58a0eaf33056d26652934cc9a3a75d901a0f0970e

SCOPE:
只允许在 TEMP 中修正、测试和封包 operator bundle。
仓库中只允许新建：
reports/A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_0731_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1.md

不得修改产品源码、测试、冻结设计、authority、PROJECT_STATE.md 或 DECISION_LOG.md。
不得执行网络、metrics、真实 LLM、DB、Tushare、Real99 或任何 Git mutation。

REQUIRED_FIXES:

进程终止必须绑定 PID+creation-time：
- kill 前重新读取并核对 identity；
- SAME_IDENTITY 才允许 kill；
- PID_REUSED 不得杀新进程；
- UNKNOWN 必须 fail closed；
- 禁止任何 PID-only kill。
进程树必须最深后代优先、根进程最后。
必须关闭动态派生竞态：
- 优先采用在 runner 执行前建立的 Windows Job Object/KILL_ON_JOB_CLOSE；
- 或提供等价且经过压力测试的机械证明。
  单次 CIM 快照不能作为无孤儿证明。
无法建立 containment 时不得启动 runner。
runner 启动后若无法确认终止：
- 不得写 terminal success/sealed 状态；
- 不得退出并遗留可能存活的 runner；
- 必须进入明确的 MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE 监督状态。
重做 group-tree 测试：
- normal、cimfail、killfail、waitfail 均使用真实三层树；
- 子进程至少 sleep 300 秒或无限等待，禁止 30 秒自然退出假阳性；
- 在任何 harness cleanup 前立即核对全部 PID+creation-time；
- cleanup 只能在结果断言和原始证据落盘之后执行；
- ledger 必须证明 Start-RunnerProcess 恰好调用一次。
加入严格时间绑定：
status.started_utc
<= preflight.sample1.captured_at_utc
< preflight.sample2.captured_at_utc
<= context.runner_start_time_utc
<= status.ended_utc

正例必须满足该顺序。
加入 future-preflight、after-run、swapped samples、malformed/non-UTC timestamp 等负例。
deadline：
- 始终要求正整数；
- 无 TestHooks 的生产模式必须 >=7200；
- 小于 7200 只允许在明确的离线 TestHooks 模式。
原始测试证据：
生成 offline_test_results.json，逐项记录：
command、started_utc、ended_utc、strict integer exit_code、
pass_count/fail_count、stdout/stderr/log 相对路径、size、SHA256。
必须封存所有强制测试的真实原始输出，不能只保存测试源码或摘要。
实际生成 secret-free operator.log，并与 context、seal manifest 和最终 evidence 绑定。
README 必须把“人工设置凭据环境变量”放在启动 Group B 之前；
不得读取、输出、哈希或保存凭据值。
README Step 0 必须验证：
exact member set、逐成员 size/SHA、duplicate、case collision、
absolute path、../ traversal 和 manifest 自身绑定。
重新执行全部套件：
Group A 17/17
Group C+identity 18/18
Group D 34/34
argv 8/8
group-tree 4/4
deadline/no-orphan
monitor-path-missing fail-before-network
PowerShell 5.1 parse
Python compile
genuine 99-document PRODUCT_PASS
所有负例与时间绑定测试
从空 deliverables 目录 clean rebuild：
operator bundle + manifest
acceptance evidence + manifest
positive product evidence + sidecar
changes.json
changed_files.zip
change_evidence.json
path_sha_ledger.json
no_extra_path_proof.json
outer deliverables.zip
最终报告必须明确包含：
CHANGE_MANIFEST_PATH
CHANGE_MANIFEST_SHA256
CHANGE_COUNT
CHANGED_PATHS
CHANGED_FILES_ZIP_PATH
CHANGED_FILES_ZIP_SHA256
CHANGED_FILES_ZIP_FILE_COUNT
BYTE_VERIFICATION_RESULT
DELETED_PATHS
GIT_HEAD_AT_PACKAGING

SUCCESS_STATUS:
CONTROLLED_REAL99_OPERATOR_COMMAND_R4_R5_READY_AWAITING_INDEPENDENT_REVIEW_AND_USER_LIVE_AUTHORIZATION

若任一项未完成，必须如实报告 INCOMPLETE 并停止。
不得签发 PASS/GO，不得执行 Real99。

I'll start by capturing the baseline state and understanding the current task context.

run issue · cd /d/project/a_quant_cn && git branch --show-current && git rev-pars...
command: cd /d/project/a_quant_cn && git branch --show-current && git rev-parse HEAD && echo "---STAGED---" && git diff --cached --name-only
&& echo
"---STATUS---" && git status --short --untracked-files=all | Select-Object -First 60
output: Failed to execute tool: ��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 84

... g = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn && git bra ...

~~

��ǡ�&&��Ǵ˰汾�е��Ч��ָ��
��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 113

... TF8; cd /d/project/a_quant_cn && git branch --show-current && git rev ...

~~

��ǡ�&&��Ǵ˰汾�е��Ч��ָ��
��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 135

... uant_cn && git branch --show-current && git rev-parse HEAD && echo "- ...

~~

1 lines omitted; Alt+V:output
��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 158
3 lines omitted; Alt+V:output
��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 191
3 lines omitted; Alt+V:output
��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 214
3 lines omitted; Alt+V:output
+ CategoryInfo : ParserError: (:) [], ParentContainsErrorRecordException
+ FullyQualifiedErrorId : InvalidEndOfLine

Command exited with code 1

PowerShell environment. Let me use PowerShell-native syntax.

run done · cd /d/project/a_quant_cn; & git branch --show-current; & git rev-pars...
output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。
所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855275825597200.ps1:1 字符: 59

... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; & git ...
```
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
```
- CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
  Alt+V:details

Baseline matches: branch phase/00b-2b2b-serial-executor-contract, HEAD 42491f66c5df4402a949010ead4372c946b53e68, staged=0. There is a large pre-existing dirty/untracked state unrelated to my narrow scope. Let me locate the R4_R4 deliverables and existing operator artifacts.

run done · cd /d/project/a_quant_cn; Get-ChildItem -Recurse -Directory -Filter "...
output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。
所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855296995948400.ps1:1 字符: 59

... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; Get-Ch ...
```
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
```
- CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
  Alt+V:details
  run done · cd /d/project/a_quant_cn; Write-Output "== 08B_04R dirs =="; Get-Chil...
  output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。
  所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855307253346900.ps1:1 字符: 59
... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; Write- ...
```
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
```
- CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
  Alt+V:details

The cd /d/... is being misparsed. The shell starts in the workspace root. Let me search more broadly for the R4 artifacts.

run done · Set-Location D:\project\a_quant_cn; Write-Output "== PWD =="; (Get-Lo...
output: == PWD ==
D:\project\a_quant_cn
== search workspace for R4 / operator / real99 dirs ==
D:\project\a_quant_cn\data\control\08b_06r4_controlled_ingestion
D:\project\a_quant_cn\docs\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_02A_R2_SERVING_AUTHORITY_CAPTURE_CORRECTION_LLD_V1_files
Alt+V:details
run done · Write-Output "== TEMP search for R4 deliverables / operator bundles =...
output: == TEMP search for R4 deliverables / operator bundles ==

FullName : C:\Users\User\AppData\Local\Temp\2zr4rokn
Length :
Alt+V:details

Found the R4_R4 directory in TEMP. Let me explore it fully.

run done · $root="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN...
output: d----- 2026/9/7 20:46:47 groupc
d----- 2026/9/7 20:53:06 r4t16_jctb_blr
d----- 2026/9/7 20:53:26 r4t16_jh6nq_hs
d----- 2026/9/7 20:53:26 r4t17_0dz6va4z
d----- 2026/9/7 20:53:26 r4t18_p84gv8ci
Alt+V:details

This is a large existing R4_R4 deliverable tree. Let me get a file-level inventory and locate the R4_R4 report and the main operator bundle. I'll dispatch parallel exploration.

run done · $root="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN...
output: ...
...
...
C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_DEEPSEEK_FLASH_OPERATOR_FALSE_PASS_PROCESS_AND_EVIDENCE_SEALING_CL
OSURE_V1\d_missing_logs\run\evidence\A_QUANT_CN_08B_04R_99_ROW_B
Alt+V:details
run done · Write-Output "== reports dir R4 references =="; Get-ChildItem D:\proj...
output: == reports dir R4 references ==
08B_04R_REAL99_RUN2_R5R2_FAIL_CLOSED_SECRET_SANITIZATION_FINAL_CLOSURE_V1.md
08B_04R_REAL99_RUN2_R5R3_NESTED_SECRET_STRUCTURE_FAIL_CLOSED_FINAL_CLOSURE_V1.md
08B_04R_REAL99_RUN2_R5R4_NESTED_SECRET_KEY_CONTENT_FAIL_CLOSED_FINAL_CLOSURE_V1.md
A_QUANT_CN_08B_04R_REAL99_31_SEMANTIC_FAILURE_DIAGNOSIS_AND_NUMERIC_LAYOUT_BINDING_DESIGN_V1.md
Alt+V:details

There's an established R8_04 series of operator reports in the repo. My task is R4_R5. Let me read the immediate predecessor (R4_R4) report and the R8_04 base to understand exactly what was produced.

read done · Reading D:\project\a_quant_cn\reports\A_QUANT_CN_08B_04R_REAL99_RUN2_...
done: Reading D:\project\a_quant_cn\reports\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_T
REE_CLOSURE_V1.md

I have the R4_R4 report context. Now I need to locate the R4_R4 deliverables.zip (input, SIZE=5237770, SHA256=b1ed6678...) and the actual operator bundle source. Let me search for these.

run done · Write-Output "== search for deliverables.zip / 5237770 files =="; Get...
output: == search for deliverables.zip / 5237770 files ==

FullName : C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\deliverables\deliverables.zip
Length : 8642080
Alt+V:details

Found the R4_R4 deliverables.zip. Let me verify its SHA256 against the expected input hash.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\out_del...
output: SIZE=5237770
SHA256=b1ed66788c26a5c0d2348ce3e200ad727aba310fddb8422bb370fef631bafe6f
run done · Write-Output "== R4_R4 out_deliv contents =="; Get-ChildItem "C:\User...
output: == R4_R4 out_deliv contents ==

Name Length

change_evidence.json 549
Alt+V:details

R4_R4 deliverables.zip SHA256 matches (b1ed6678...). Input confirmed. Now let me map the R4_R4 bundle/build infrastructure. Let me examine the operator bundle structure and manifests.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: == build tree ==

FullName : C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle

Alt+V:details
run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: == operator bundle manifest ==
{
"schema": "A_QUANT_CN_08B_04R_R4_R4_OPERATOR_BUNDLE_MANIFEST_V1",
"task_id": "A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_TREE_CLOSURE_V1",
"git_head": "42491f66c5df4402a949010ead4372c946b53e68",
Alt+V:details

The R4_R4 operator bundle has 7 members and its zip SHA256 (ee7da9ec...) matches the input. Now let me set up a plan and read the operator bundle contents to understand the flow before implementing the 12 R4_R5 fixes.

Let me set up the R4_R5 temp workspace and copy the operator bundle as the base, then I'll read every file.

run done · $task="A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROC...
output: TASK_WS=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_
AND_RA
W_EVIDENCE_CLOSURE_V1
Created: True
== copied bundle ==
Alt+V:details

The bundle_r4r4 working copies differ from the packaged manifest (README 5509 vs 6411, group_b 35678 vs 35935). Let me check the build/bundle authoritative version and the packaging scripts to understand the build pipeline.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: == build/bundle file sizes ==

Name Length

group_a.ps1 13729
Alt+V:details
run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: ===== package_op.py =====
import os, json, zipfile, hashlib, sys

ROOT = r"C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"
BUNDLE_SRC = os.path.join(ROOT, "build", "bundle")
Alt+V:details

build/bundle holds the authoritative 7 members (SHA matches the packaged manifest). Let me read all of them, starting with the README and the smaller scripts.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\README_OPERATOR.txt

Now let me read the Group scripts. First the smaller ones (a, c) and then the large group_b.

read · 2 items
●● 2 done, 0 running
Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_a.ps1
Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_c.ps1

Now the critical one — group_b.ps1. Let me read it in full.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_b.ps1

I now understand group_b.ps1 (R4_R4). Key gaps vs the required R4_R5 fixes are clear: Stop-ProcessByIdentity does PID-only kill (no identity binding), no Job Object containment, no explicit MANUAL_INTERVENTION supervision state, operator.log not written, no temporal binding, no deadline>=7200 gate, README Step 0 lacks archive-safety checks, credentials discussed after Group B. Let me examine the acceptance harness and read the python helpers.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: == accept_r4r4 files (name,size,relpath) ==
accept_r4r4\dev\argv_echo.py | 130
accept_r4r4\dev\group_a.ps1 | 13729
accept_r4r4\dev\group_b.ps1 | 35935
accept_r4r4\dev\group_c.ps1 | 6227
Alt+V:details

The harness has many fixture files. Let me get a cleaner inventory of the harness driver scripts (excluding fixture data) and understand how the suites are executed.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: == top-level entries ==

Mode Name Length

d----- dev
Alt+V:details

Now I understand the harness layout. Let me read group_d.ps1 next (needed for the seal/product-pass flow), then the python helpers and test drivers.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_d.ps1

This is a very large, tightly-coupled system. To preserve context and move efficiently, let me dispatch parallel read-only subagents to analyze the remaining harness/test infrastructure and the two Python helpers, while I proceed to author the core bundle changes.

explore
…
read_file running
bash running
╰ done · 11m 43s · I have read all the required files and the product-side group_b.ps1 to confirm invocation + marker semantics. I have enough evidence.

One constraint to flag up front: I am operating as a read-only explore/scout role — my bash is restricted to read-only inspection and no file-write t...

explore
…
bash running
bash running
╰ done · 15m 38s · The tooling constrains all writes to the repo workspace (write_roots must be repo-relative, and the temp path is outside any repo), and child workers of this read-only run have write:false. I cannot physically persist outside the workspace with these guards. I'll therefore deliver the complete,...

general
…
list_dir running
list_dir running
╰ cancelled · 2m 31s

Both analyzers are running. Let me wait for their output.

agent waited · agent_29316445
agent checked · agent_29316445
run done · Start-Sleep -Seconds 20; Write-Output "== harness analysis =="; if (T...
output: == harness analysis ==
MISSING
== python analysis ==
MISSING
time: 20s

The analyzer files aren't ready yet. Let me read the critical harness files myself while waiting.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: ===== lib_runner.ps1 =====

Shared A3-compliant process runner. Never uses $Args as a parameter name,

never uses `cmd.exe /c`, never unprescrit... never `($ArgList -join ' ')` on

raw args, never synchronous sequential ReadToEnd. Each argv is quoted with

ConvertTo-WindowsArg; stdout/stderr are read asynchronously; WaitForExit has

Alt+V:details

Let me read the tree process scripts and hooks_b_tree.ps1 to understand the current tree-test weaknesses.

run issue · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
command: $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4"; for($f in @("tests\tree_runner.py","tests\tree_child.py"
,"tests
\tree_grandchild.py","tests\run_gb_treechild.ps1","tests\run_gb_child.ps1","dev\hooks_b_tree.ps1","utils\sleep.py")){ Write-Output "===== $
f ====="; Get-Content (Join-Path $r $f) -Raw }
output: Failed to execute tool: ��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855971370930300.ps1:1 �ַ�: 142

... a\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4"; for($f in @("test ...

~~

��ʽ��а��ı�ǡ�in��
+ CategoryInfo : ParserError: (:) [], ParentContainsErrorRecordException
+ FullyQualifiedErrorId : UnexpectedToken

Command exited with code 1
run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: ===== tests\tree_runner.py =====
import os
import subprocess
import sys
import time
Alt+V:details

I now have a thorough understanding. Let me check whether the subagent analyses are ready.

run done · foreach($p in @("C:\Users\User\AppData\Local\Temp\AQCN_R4R5_HARNESS_A...
output: if : 无法将“if”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写，如果包括路径，请确保路径正确，然后再试一次。
所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788856012347222900.ps1:1 字符: 232

... \AQCN_R4R5_PYTHON_ANALYSIS.md")){ Write-Output "$p -> " + (if(Test-Pa ...
```
                                                           ~~
```
- CategoryInfo : ObjectNotFound: (if:String) [], CommandNotFoundException
  Alt+V:details
  run done · $p1="C:\Users\User\AppData\Local\Temp\AQCN_R4R5_HARNESS_ANALYSIS.md";...
  output: HARNESS=MISSING PYTHON=MISSING

The subagents haven't produced output. Let me not depend on them — I'll read the two Python helpers myself (critical for edits). Let me cancel the stalled analyzers and read on.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\r4_r2_seal_evidence.py

Now the large strict_verify.py — the heart of product/binding verification where temporal ordering must be enforced.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\r4_r2_strict_verify.py

I now have complete understanding of strict_verify.py and seal_evidence.py. Critical findings: (1) no temporal-ordering check exists; (2) verify_member_authority hard-codes operator_count==6/member_count==109, which must become 7/110 when operator.log is added to the seal member set (Fix 8). Let me inspect the d_pos positive fixture timestamps and the fixture generator.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: ===== make_fixtures_r4.py =====
Get-Content : 找不到路径“C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\utils\make_fixtures_r4.py”，因为该路径不存在。
所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788856122188793600.ps1:1 字符: 171

... ixtures_r4.py ====="; Get-Content "$r\utils\make_fixtures_r4.py" -Raw

                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Alt+V:details
run done · $d="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: == context.json (key fields) ==

run_id : run-d_pos
runner_pid : 4242
Alt+V:details

I now have a complete map. Key finding: the d_pos positive fixture's preflight timestamps (09-08T00:00:00) violate the required temporal order vs runner_start_time_utc (09-07T10:00:02), so R4_R5 must regenerate that fixture's timestamps too. This is a very large task. Let me set up the R4_R5 workspace with the authoritative base files and proceed methodically.

run done · $task="A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROC...
output: WS=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVI
DENCE_CLOSURE_V1
== bundle copied ==

Alt+V:details

The R4_R5 workspace is ready with authoritative base files. This is a large implementation. Let me now author the corrected bundle scripts, beginning with the core group_b.ps1 (Job Object containment, identity-bound kills, MANUAL_INTERVENTION, deadline gate, operator.log). I'll use surgical edits on the base file.

tool done · Updated
Updated · +105 -0
--- a/
+++ b/
@@ -28,9 +28,114 @@
28 28 )
29 29
30 30 # ---------------------------------------------------------------------------
31 31 + # R4_R5-02: Windows Job Object containment (P/Invoke). Before the runner
31 32 + # starts we create a job with JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE and assign the
31 33 + # runner to it; every dynamically-spawned descendant automatically becomes a
31 34 + # member (no breakaway), so closing/terminating the job mechanically kills the
31 35 + # WHOLE tree with no fork race. This is the primary no-orphan guarantee (a
31 36 + # single CIM snapshot is NOT a no-orphan proof).
31 37 + # ---------------------------------------------------------------------------
31 38 + Add-Type -TypeDefinition @"
+104 diff lines · Alt+V:change

The harness analyzer completed (read-only role, so it reported inline). Key confirmations: tree children sleep 30s (must become ≥300s for R4_ R5), and production baseline hashes stay valid since I'm not changing repo files. Let me continue editing group_b.ps1 — make Stop-ProcessByIdentity identity-bound.

tool done · Updated
Updated · +24 -9
--- a/
+++ b/
@@ -374,17 +374,32 @@
374 374 catch { return $null }
375 375 }
376 376
377 377 - # boundary leaf: terminate one pid. $true if a kill was confirmed (or the
378 377 - # process was already gone); $false if the kill could not be confirmed.
379 377 + # boundary leaf: identity-bound termination of ONE frozen process. R4_R5-01:
379 378 + # NEVER a PID-only kill. The live identity is re-read and verified against the
379 379 + # frozen creation-time BEFORE any kill:
379 380 + # UP -> SAME_IDENTITY: safe to kill.
379 381 + # GONE -> frozen process already absent: nothing to kill (ok).
379 382 + # REUSE -> a NEW process now owns the PID: MUST NOT kill it; the frozen
+30 diff lines · Alt+V:change

Now restructure Stop-RunnerTree to use Job Object termination as primary (closing the fork race), with identity-bound deepest-descendant-first fallback and by-identity verification.

tool done · Updated
Updated · +40 -20
--- a/
+++ b/
@@ -447,15 +447,20 @@
447 447 }
448 448 }
449 449
450 450 - # R4_R4-01: freeze (runner + every recursive descendant, pid + creation-time)
451 450 - # BEFORE any kill, then terminate descendants-first, then wait and verify every
452 450 - # frozen identity by identity. Any CIM / kill / wait / identity failure =>
453 450 - # terminated=$false (the caller then records exit_code=$null, fail closed).
454 450 + # R4_R5-02: freeze (runner + every recursive descendant, pid + creation-time)
454 451 + # BEFORE any kill, then terminate the WHOLE tree via the containment Job Object
454 452 + # (KILL_ON_JOB_CLOSE / TerminateJobObject) which mechanically closes the dynamic
454 453 + # fork race, then wait and verify EVERY frozen identity by identity
+75 diff lines · Alt+V:change

Now add deadline validation (Fix 6) and the Job Object containment before runner launch (Fix 3) in MAIN.

tool done · Updated
Updated · +15 -0
--- a/
+++ b/
@@ -568,6 +568,14 @@
568 568 else { throw ('FAIL_CLOSED TEST_HOOKS_MISSING ' + $TestHooks) }
569 569 }
570 570
571 571 + # R4_R5-06: deadline rules. Always a positive integer; production (no
571 572 + # TestHooks) must be >= 7200; a shorter deadline is allowed only in an explicit
571 573 + # offline TestHooks mode.
571 574 + if ($RunnerDeadlineSeconds -lt 1) { throw 'FAIL_CLOSED DEADLINE_NOT_POSITIVE_INTEGER' }
571 575 + if ([string]::IsNullOrWhiteSpace($TestHooks) -and $RunnerDeadlineSeconds -lt 7200) {
571 576 + throw ('FAIL_CLOSED DEADLINE_BELOW_PRODUCTION_MINIMUM value=' + $RunnerDeadlineSeconds)
571 577 + }
571 578 +
+19 diff lines · Alt+V:change

Now add the temporal-ordering and operator.log helper functions to group_b.ps1, and update the transaction wrap-up (termination tracking, MANUAL_INTERVENTION, operator.log, job close).

tool done · Updated
Updated · +55 -0
--- a/
+++ b/
@@ -559,6 +559,54 @@
559 559 return [pscustomobject]@{ exit_code = $exitCode; pid = $proc.Id; start_time = $RunnerHandle.start_time; stdout = $outText; stderr =
$errText; timed_out = $timedOut; terminated = $terminated; drain_ok = $drainOk }
560 560 }
561 561
562 562 + # R4_R5-05: strict temporal ordering assertion (production mode).
562 563 + # status.started_utc <= preflight.sample1.captured_at_utc
562 564 + # < preflight.sample2.captured_at_utc
562 565 + # <= context.runner_start_time_utc
562 566 + # <= status.ended_utc
562 567 + # Malformed / missing / non-UTC timestamps fail closed.
562 568 + function Assert-TemporalOrdering {
+73 diff lines · Alt+V:change

Both analyzers confirmed my findings. Now let me fix a subtle robustness issue in Stop-RunnerTree: if the job is empty (e.g. runner assignment failed), TerminateJobObject succeeds but kills nothing, so I must always run identity-bound kills as belt-and-suspenders.

tool done · Updated
Updated · +10 -10
--- a/
+++ b/
@@ -490,19 +490,19 @@
490 490 }
491 491 foreach ($d in $byDepth.Keys) { foreach ($c in $byDepth[$d]) { [void]$frozen.Add($c) } }
492 492
493 493 - # ---- terminate: the containment job kills the whole tree atomically ----
494 493 + # ---- terminate: the containment job kills the whole tree atomically (primary,
494 494 + # closes the dynamic fork race). Identity-bound kills ALWAYS also run as
494 495 + # belt-and-suspenders (GONE/REUSE nodes are no-ops; only the exact frozen
494 496 + # identity may be killed) so an unassigned / empty-job case still ends the
494 497 + # tree by identity.
494 498 $jobKill = Invoke-TerminateJobTree
495 499 - $killOk = $jobKill
+18 diff lines · Alt+V:change

Now update the finally block of group_b to write the secret-free operator.log, add MANUAL_INTERVENTION supervision state, and close the job (final no-orphan guarantee).

tool done · Updated
Updated · +32 -0
--- a/
+++ b/
@@ -852,6 +852,12 @@
852 852 }
853 853 finally {
854 854 $endedUtc = (Get-Date).ToUniversalTime().ToString('yyyy-MM-ddTHH:mm:ss.fffZ')
855 855 + # R4_R5-03: explicit supervision state when the runner may still be alive.
855 856 + $supervisionState = 'NOT_STARTED'
855 857 + if ($runnerStarted -eq $true) {
855 858 + if ($terminationConfirmed) { $supervisionState = 'TERMINATED_CONFIRMED' }
855 859 + else { $supervisionState = 'MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE' }
855 860 + }
855 861 $st = @{
856 862 schema = 'A_QUANT_CN_REAL99_R2_OPERATOR_STATUS_V1'
+39 diff lines · Alt+V:change

Let me parse-check group_b.ps1 for PowerShell 5.1 syntax validity before proceeding.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: ERRORS=0

group_b.ps1 parses cleanly. Now update r4_r2_seal_evidence.py to include operator/operator.log as a required, promised binding member (Fix 8).

tool done · Updated
Updated · +4 -1
--- a/
+++ b/
@@ -44,8 +44,11 @@
44 44 ("operator/final_aggregate.out.json", "out"),
45 45 ("operator/runner.stdout.log", "runner_stdout_log"),
46 46 ("operator/runner.stderr.log", "runner_stderr_log"),
47 47 + # R4_R5-08: the secret-free operator.log is a REQUIRED binding member; its
47 48 + # bytes + SHA256 are sealed into the sidecar alongside context/status/etc.
47 49 + ("operator/operator.log", "log"),
47 50 ]
48 51 - PROMISED_LOGS = ("runner_stdout_log", "runner_stderr_log")
49 51 + PROMISED_LOGS = ("runner_stdout_log", "runner_stderr_log", "log")
49 52
50 53
+1 diff lines · Alt+V:change

Now update r4_r2_strict_verify.py: add strict temporal-ordering enforcement (Fix 5) and update member-authority counts for the added operator.log member (Fix 8).

tool done · Updated
Updated · +59 -2
--- a/
+++ b/
@@ -50,6 +50,7 @@
50 50 import json
51 51 import os
52 52 import sys
53 53 + from datetime import datetime, timezone
53 54
54 55 # ---------------------------------------------------------------------------
55 56 # Frozen constants (must equal the frozen runner / design authorities).
@@ -517,8 +518,6 @@
517 518
518 519 # --- quiescence four-way binding ---
519 520 qb = verdict["quiescence_binding"]
+70 diff lines · Alt+V:change
tool done · Updated
Updated · +6 -5
--- a/
+++ b/
@@ -835,7 +835,8 @@
835 835 "operator/quiescence_preflight.json",
836 836 "operator/final_aggregate.out.json",
837 837 "operator/runner.stdout.log",
838 838 - "operator/runner.stderr.log"):
839 838 + "operator/runner.stderr.log",
839 839 + "operator/operator.log"):
839 840 operator_count += 1
840 841 else:
841 842 out["fail"].append("sealer_unknown_member:%s" % m)
@@ -852,10 +853,10 @@
852 853 out["fail"].append("control_count!=4")
+13 diff lines · Alt+V:change

Let me compile-check both Python helpers after the edits.

run issue · $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
command: $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND
_RAW_EV
IDENCE_CLOSURE_V1\build\bundle"; python -m py_compile "$b\r4_r2_strict_verify.py"; Write-Output "strict_verify compile exit=$LASTEXITCODE";
python -m py_compile "$b\r4_r2_seal_evidence.py"; Write-Output "seal compile exit=$LASTEXITCODE"; python -m py_compile "$b\group_a.ps1" 2>
$null; Write-Output "(py_compile only for .py)"
output: Failed to execute tool: Sorry: IndentationError: unexpected indent (r4_r2_strict_verify.py, line 521)strict_verify compile exit=1
seal compile exit=0
(py_compile only for .py)

Command exited with code 1

My quiescence-binding edit accidentally deleted the q_ctx initialization lines. Let me inspect and fix that region.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: 505: if args.repo_scripts not in sys.path:
506: sys.path.insert(0, args.repo_scripts)
507: import real99_evidence_journal_v1 as _J # noqa: F401
508: _payload, _data, _sha = _J.load_and_validate_quiescence_preflight(
509: args.preflight)
Alt+V:details

The edit dropped the q_ctx init and if guard. Let me restore them.

tool done · Updated
Updated · +2 -0
--- a/
+++ b/
@@ -518,6 +518,8 @@
518 518
519 519 # --- quiescence four-way binding ---
520 520 qb = verdict["quiescence_binding"]
521 521 + q_ctx = ctx.get("quiescence_sha256")
521 522 + if not is_lower64hex(q_ctx):
521 523 qb["context_quiescence_sha256"] = {"ok": False,
522 524 "error": "missing or not lowercase 64-hex"}
523 525 bad.append("context_quiescence_sha256")
Alt+V:change
run done · $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: strict_verify compile exit=0

Both helpers compile. Let me update group_d.ps1's binding filter to surface temporal failures.

tool done · Updated
Updated · +1 -1
--- a/
+++ b/
@@ -297,7 +297,7 @@
297 297 # binding = quiescence four-way + status binding + same-run binding
298 298 $bindingPass = [bool]$verdict.ok
299 299 $bindingFields = ($verdict.fail_fields | Where-Object {
300 300 - $_ -match 'quiescence|status_|same_run|public_quiescence' }) -join ','
301 300 + $_ -match 'quiescence|status_|same_run|public_quiescence|temporal' }) -join ','
301 301 }
302 302 # any verifier process failure downgrades PRODUCT_PASS (fail closed).
303 303 if ($null -ne $badHelper) {
Alt+V:change

Now rewrite README_OPERATOR.txt for R4_R5 (Fix 8 credential placement before Group B, Fix 9 full Step 0 archive-safety verification, deadline/containment/supervision notes). Full rewrite:

tool done · Updated
Updated · +119 -35
--- a/
+++ b/
@@ -1,6 +1,6 @@
1 1 - R4_R4 OPERATOR BUNDLE — A_QUANT_CN 08B 04R REAL99 RUN2 R8_04 (DeepSeek-V4-Flash)
2 1 + R4_R5 OPERATOR BUNDLE — A_QUANT_CN 08B 04R REAL99 RUN2 R8_04 (DeepSeek-V4-Flash)
2 2 ================================================================================
3 3 - TASK_ID: A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_TREE_CLOSURE_V1
4 3 + TASK_ID: A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1
4 4
5 5 This bundle contains the Group A/B/C/D operator modules, the strict-verify
6 6 helper and the evidence-seal helper. Every module runs on Windows PowerShell
@@ -16,35 +16,108 @@
16 16 LLM_API_KEY_ENV = A_QUANT_CN_AUDIT_LLM_API_KEY (env var NAME only; never read)
17 17
+208 diff lines · Alt+V:change

The bundle core is updated. Now I need to mirror it into the harness and build the acceptance suite. Let me mirror the updated bundle into accept/dev and read the Group D harness assertion model to plan the fixture rework.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: == mirrored into accept/dev ==

Name Length

argv_echo.py 130
Alt+V:details
read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\acc...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\tests\run_groupd_r4r3.ps1

The Group D harness tests the utils/ helper copies (byte-identical in R4_R4). I must update those too. Also, since subagents can't write to TEMP (outside repo workspace, confirmed by the analyzers), I'll do all TEMP writes myself. Let me update the utils copies and inspect which fixtures have operator.log at their context.log path.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: utils updated
utils strict compile=0
run done · $fix="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2...
output: == fixtures and their context.log existence ==
...
...
...
...
Alt+V:details

Critical: the copied fixtures' internal absolute paths still point to the R4_R4 directory. I must retarget them to R4_R5 paths (same fix R4_R4 applied vs R3). Let me check the R4_R4 retarget tool.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...
output: ===== retarget_all.py =====
import json, os, glob

base = r"C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\fixtures_gd"
old = r"A_QUANT_CN_08B_04R_R4_R3\accept_r4r3"
Alt+V:details

The copied fixtures retain R4_R4 absolute paths internally and must be retargeted to R4_R5. Let me inspect the d_pos manifest quiescence block and status/context to write a precise fixture-fixer.

run done · $d="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: == run_manifest.json (quiescence_preflight + run_id + top keys) ==
quiescence_preflight
run_id
schema
--qp--
Alt+V:details

Let me read hooks_d.ps1 and write a comprehensive fixture-fixer script that retargets paths to R4_R5, fixes d_pos timestamps + SHA bindings + operator.log, and creates the temporal-negative fixtures.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: ===== hooks_d.ps1 =====

hooks_d.ps1 - R4 Group D test hooks (offline process-state stubs; never in

production). Dot-sourced after the Group D function definitions override the

leaf boundaries so the COMPLETE Invoke-GroupD path runs offline.

function Resolve-ProcessState {
Alt+V:details

Now I'll write a comprehensive fixture-fixer for R4_R5.

Note Emergency compaction complete: 124 → 43 messages (81 removed), ~264821 → ~59531 tokens

tool done · Created
Created · +208 -0
--- a/
+++ b/
@@ -0,0 +1,208 @@
0 1 + #!/usr/bin/env python
0 2 + # -- coding: utf-8 --
0 3 + """R4_R5 fixture fixer: retarget R4_R4 absolute paths -> R4_R5, fix the d_pos
0 4 + temporal ordering + quiescence SHA bindings + secret-free operator.log, ensure
0 5 + every gd fixture has operator.log, and create the temporal-negative fixtures."""
0 6 + import json, os, shutil, hashlib, glob
0 7 +
0 8 + TEMP = r"C:\Users\User\AppData\Local\Temp"
0 9 + R4 = "A_QUANT_CN_08B_04R_R4_R4"
0 10 + R5 = "A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1"
0 11 + OLD = os.path.join(TEMP, R4, "accept_r4r4")
+197 diff lines · Alt+V:change

Let me set up a task list and verify the critical unknowns in group_b.ps1 (logPath definition, Resolve-ProcessIdentityState existence) before proceeding.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: == keyword presence ==
Resolve-ProcessIdentityState -> 3
Write-OperatorLog -> 2
Assert-TemporalOrdering -> 2
New-OperatorJob -> 2
Alt+V:details

Let me inspect the actual names used for log path and termination variable in group_b.ps1.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: == logPath ==
147: param([string]$FilePath, [string[]]$NativeArgs, [string]$LogPath)
155: [System.IO.File]::WriteAllLines($LogPath, $lines, (New-Object System.Text.UTF8Encoding($false)))
594: param([string]$LogPath, [hashtable]$Fields)
601: [System.IO.File]::WriteAllText($LogPath, $text, (New-Object System.Text.UTF8Encoding($false)))
Alt+V:details

logPath and terminationConfirmed are correctly defined. Let me read the key implementation sections to verify correctness (identity resolution, Stop-RunnerTree, Write-OperatorLog, finally).

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1

Group_b.ps1 implementation looks correct. Now let me read the tree/deadline/monitor harness files from R4_R4 to understand the boundary seams before rewiring for R4_R5.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: ########## hooks_b_tree.ps1 ##########

R4_R4 process-tree offline test hooks (never used in production).

Dot-sourced AFTER the Group B function definitions, so it can both override

the boundary leaves and reuse the in-scope ConvertTo-Argtring helper.

Mode is selected by $env:TREE_MODE:

Alt+V:details

The tree harness must be substantially reworked for R4_R5. Given subagents can't write to TEMP, I'll do all work myself. Let me first understand the Group D case discovery and tree python files.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: ########## make_gd_fixtures_r4r3.py ##########
Get-Content : 找不到路径“C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\make_gd_fixtures_r4r3.py”，因为该路径不存在
。
所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788857593859064600.ps1:1 字符: 198

... y ##########"; Get-Content "$r\make_gd_fixtures_r4r3.py" -Raw; Write- ...
Alt+V:details

Let me locate the Group D case-discovery mechanism and the run_groupd driver in the R4_R5 copy.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: == find make_gd / gd fixtures scripts ==
C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\argv_echo.py
C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\r4_r2_seal_evidence.py
C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\r4_r2_strict_verify.py
C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\groupa\a_label_swap\capture\validate_quiescence.py
Alt+V:details

Let me read the full run_groupd driver to understand RunGD assertion logic.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\accept\tests\run_groupd_r4r3.ps1

The Group D driver is clear. Before running the fixture-fixer, I'll improve it to mutate the existing d_pos preflight (preserving all fields the real validator accepts) rather than crafting a minimal one. Let me check the current d_pos preflight structure.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...
output: == d_pos preflight raw ==
{"samples":[{"captured_at_utc":"2026-09-08T00:00:00.000Z","running":0,"sample_index":1,"waiting":0},{"captured_at_utc":"2026-09-08T00:00:01
.000Z","running":0,"sample_index":2,"waiting":0}],"schema_version":"A_QUANT_CN_VLLM_QUIESCENCE_PREFLIGHT_V1"}
== d_pos status started/ended/quiescence_sha ==
2026-09-07T10:00:02.000Z
Alt+V:details

The d_pos preflight schema matches what R4_R4 validated, and my crafted values are valid. Let me run the fixture-fixer.

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_E
VIDENCE_CLOSURE_V1"; Set-Location $ws; python "$ws\fix_r4r5_fixtures.py"; Write-Output "fixer exit=$LASTEXITCODE"
output: Failed to execute tool: Traceback (most recent call last):
...
mf = load(manifest_path)
^^^^^^^^^^^^^^^^^^^
...
with open(path, "r", encoding="utf-8") as f:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
fixer exit=1

Command exited with code 1

The manifest location assumption was wrong. Let me check the actual evidence_dir value and locate run_manifest.json.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: evidence_dir=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BIN
DING_A
ND_RAW_EVIDENCE_CLOSURE_V1\accept\fixtures_gd\d_pos\run\evidence\A_QUANT_CN_08B_04R_99_ROW_BODY_QUANT_REAL_GATE_V1_RUN_run-d_pos
evidence_root=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_
AND_RAW_EVIDENCE_CLOSURE_V1\accept\fixtures_gd\d_pos\run\evidence
Alt+V:details

The evidence_dir already includes the run subdir, so the manifest is inside it. Let me fix the manifest path computation in both spots and re-run.

tool issue · C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04...
file: C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EV
IDENCE_CLOSURE_V1\fix_r4r5_fixtures.py
result: Editing file
result: ...
run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: 95: rd = os.path.dirname(ctx["evidence_dir"])
116: manifest_path = os.path.join(rd, "run_manifest.json")
159: mf_path = os.path.join(os.path.dirname(c["evidence_dir"]), "run_manifest.json")
tool done · Updated
Updated · +2 -2
--- a/
+++ b/
@@ -92,7 +92,7 @@
92 92 ctx = load(os.path.join(DPOS_RUN, "context.json"))
93 93 st = load(os.path.join(DPOS_RUN, "status.json"))
94 94 pf_path = ctx["quiescence_preflight"]
95 95 - rd = os.path.dirname(ctx["evidence_dir"])
96 95 + rd = ctx["evidence_dir"]
96 96 runner_start = ctx.get("runner_start_time_utc")
97 97
98 98 # craft a valid preflight with mid-run timestamps satisfying the strict order
@@ -156,7 +156,7 @@
156 156 sha = sha256file(pf_path)
157 157 s["quiescence_sha256"] = sha
+6 diff lines · Alt+V:change
run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: ...
...
d_pos preflight sha 3d316bc9d0720a22bfc734d68164c54b4bbca1f1d94068883fb3994c059090c7 size 248
MADE temporal-negative tp_future_preflight sha 9da24775bf60bbf5bec10d67dbee7e3cdd5733ec1c5868b5b3dc71e4a94d703a
MADE temporal-negative tp_after_run sha 1e256244676dad5511dd2876016c678987660008d9ece149c2af2713ef65e986
Alt+V:details

Fixture-fixer succeeded. Now let me update the harness drivers: repoint base dirs to R4_R5, add temporal negatives to Group D, and fix the tree python sleep times. Let me survey all driver base references.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: == driver files ==
run_argv_r4r3.ps1
run_gb_child.ps1
run_gb_deadline_r4r3.ps1
run_gb_monitor_missing_r4r3.ps1
Alt+V:details

Let me survey the R4_R5 accept structure to confirm path targets exist.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: == accept root files ==
== accept dirs ==
dev
fixtures_gd
gd_tmp
Alt+V:details

Now I'll rewire the harness drivers. Starting with run_groupd (base + add temporal negatives):

tool done · Updated
Updated · +7 -1
--- a/
+++ b/
@@ -6,7 +6,7 @@
6 6 [string]$Base = ''
7 7 )
8 8 $ErrorActionPreference = 'Stop'
9 9 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\accept_r4r3' }
10 9 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1\accept' }
10 10 $dev = Join-Path $Base 'dev'
11 11 $utils = Join-Path $Base 'utils'
12 12 $gd = Join-Path $dev 'group_d.ps1'
@@ -95,6 +95,12 @@
+13 diff lines · Alt+V:change
tool done · Updated
Updated · +1 -1
--- a/
+++ b/
@@ -7,7 +7,7 @@
7 7 [string]$Base = ''
8 8 )
9 9 $ErrorActionPreference = 'Stop'
10 10 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = Join-Path $env:TEMP
'A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R1_DEEPSEEK_FLASH_OPERATOR_OFFLINE_ACCEPTANCE_COMPLETION_V1' }
11 10 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1\accept' }
11 11 $dev = Join-Path $Base 'dev'
12 12 $utils = Join-Path $Base 'utils'
13 13 $ga = Join-Path $dev 'group_a.ps1'
Alt+V:change
tool done · Updated
Updated · +1 -1
--- a/
+++ b/
@@ -7,7 +7,7 @@
7 7 [string]$Base = ''
8 8 )
9 9 $ErrorActionPreference = 'Stop'
10 10 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = Join-Path $env:TEMP
'A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R1_DEEPSEEK_FLASH_OPERATOR_OFFLINE_ACCEPTANCE_COMPLETION_V1' }
11 10 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1\accept' }
11 11 $dev = Join-Path $Base 'dev'
12 12 $utils = Join-Path $Base 'utils'
13 13 $gc = Join-Path $dev 'group_c.ps1'
Alt+V:change
read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\accept\tests\run_argv_r4r3.ps1
tool done · Updated
Updated · +2 -2
--- a/
+++ b/
@@ -1,6 +1,6 @@
1 1 # R4_R2-08 argv round-trip against the R4_R3 group_b.ps1 quoting functions.
2 2 $ErrorActionPreference = 'Stop'
3 3 - $path = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\bundle_r4r3\group_b.ps1'
4 3 + $path =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1'
4 4 $content = [System.IO.File]::ReadAllText($path)
5 5 $tokens = $null; $errs = $null
6 6 $ast = [System.Management.Automation.Language.Parser]::ParseFile($path, [ref]$tokens, [ref]$errs)
@@ -23,7 +23,7 @@
23 23
+10 diff lines · Alt+V:change
run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: ##### run_gb_deadline_r4r3.ps1 #####

R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

$ErrorActionPreference = 'Stop'
$t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'
$dev = Join-Path $t 'accept_r4r3\dev'
Alt+V:details
run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: ##### run_gb_child.ps1 #####
param(
[string]$Gb, [string]$Hooks, [string]$Monitor, [string]$Repo,
[string]$RunId, [string]$OpRoot
)
Alt+V:details

Now update the deadline and monitor drivers to point at R4_R5, and bump the deadline hook's child sleep to 300s.

tool done · Updated
Updated · +5 -5
--- a/
+++ b/
@@ -1,12 +1,12 @@
1 1 # R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.
2 2 $ErrorActionPreference = 'Stop'
3 3 - $t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'
4 3 - $dev = Join-Path $t 'accept_r4r3\dev'
5 3 - $gb = Join-Path $t 'bundle_r4r3\group_b.ps1'
6 3 + $t =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1'
6 4 + $dev = Join-Path $t 'accept\dev'
6 5 + $gb = Join-Path $t 'build\bundle\group_b.ps1'
6 6 $hooks = Join-Path $dev 'hooks_b_deadline.ps1'
+8 diff lines · Alt+V:change
tool done · Updated
Updated · +4 -4
--- a/
+++ b/
@@ -1,10 +1,10 @@
1 1 # R4_R2-06 monitor-path-missing must fail BEFORE any network call.
2 2 $ErrorActionPreference = 'Stop'
3 3 - $t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'
4 3 - $gb = Join-Path $t 'bundle_r4r3\group_b.ps1'
5 3 - $hooks = Join-Path $t 'accept_r4r3\dev\hooks_b_monitor_missing.ps1'
6 3 + $t =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1'
6 4 + $gb = Join-Path $t 'build\bundle\group_b.ps1'
6 5 + $hooks = Join-Path $t 'accept\dev\hooks_b_monitor_missing.ps1'
6 6 $repo = 'D:\project\a_quant_cn'
+5 diff lines · Alt+V:change
tool done · Updated
Updated · +1 -1
--- a/
+++ b/
@@ -30,7 +30,7 @@
30 30 # injected short production deadline.
31 31 $pi = New-Object System.Diagnostics.ProcessStartInfo
32 32 $pi.FileName = 'python'
33 33 - $pi.Arguments = '-c "import time; time.sleep(30)"'
34 33 + $pi.Arguments = '-c "import time; time.sleep(300)"'
34 34 $pi.UseShellExecute = $false
35 35 $pi.RedirectStandardOutput = $true
36 36 $pi.RedirectStandardError = $true
Alt+V:change

Now the group-tree harness (Fix 4). First bump tree python sleeps from 30s to 300s:

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: tree_runner.py slept -> time.sleep(300)
tree_child.py slept -> time.sleep(300)
tree_grandchild.py slept -> time.sleep(300)

Now rewrite hooks_b_tree.ps1 so every mode drives a real 3-layer tree:

tool done · Updated
Updated · +8 -21
--- a/
+++ b/
@@ -85,31 +85,18 @@
85 85
86 86 function Start-RunnerProcess {
87 87 param([string]$Python, [string[]]$RunnerArgs, [string]$StdoutPath, [string]$StderrPath)
88 88 - # one explicit ledger record per Start-RunnerProcess invocation
89 88 + # R4_R5-04: EVERY mode (normal/cimfail/killfail/waitfail) drives a REAL
89 89 + # 3-layer runner->child->grandchild tree (each layer sleeps 300s, no
89 90 + # 30s natural-exit false positive). The failure injections below only
89 91 + # stub the CIM / kill / wait boundary leaves, not the process tree.
89 92 if ([string]::IsNullOrWhiteSpace($script:RUNCOUNT)) { $script:RUNCOUNT = Join-Path (Split-Path $script:PIDFILE -Parent)
'runcount.txt' }
90 93 $n = 0
+31 diff lines · Alt+V:change

Now rework the tree driver (base + real-3-layer expectations for all modes + evidence-before-cleanup ordering). Let me apply the edits:

tool done · Updated
Updated · +36 -8
--- a/
+++ b/
@@ -6,7 +6,7 @@
6 6 [string]$Base = ''
7 7 )
8 8 $ErrorActionPreference = 'Stop'
9 9 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4' }
10 9 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1\accept' }
10 10 $dev = Join-Path $Base 'dev'
11 11 $gb = Join-Path $dev 'group_b.ps1'
12 12 $hooks = Join-Path $dev 'hooks_b_tree.ps1'
@@ -96,10 +96,20 @@
+66 diff lines · Alt+V:change

Let me verify group_b's baseline gate won't block offline harness runs.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: 4: # A SINGLE foreground transaction: baseline → path generation → early context
15: [string]$AuditJson = 'D:\project\a_quant_cn\reports\artifacts\A_QUANT_CN_08B_04R_99_ROW_AUDIT_V1.json',
142: throw ('FAIL_CLOSED BASELINE ' + $Label + ' mismatch: got ' + $Actual)
144: Write-Host ("BASELINE_OK " + $Label)
636: # ---- verify baseline BEFORE any network / DB / LLM operation ----
Alt+V:details
run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...
output: 21: [string]$MonitorPath = '',
92: function New-OperatorJob {
112: function Add-RunnerToJob {
342: function Start-RunnerProcess {
565: # <= context.runner_start_time_utc
Alt+V:details
read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1

The tree harness has a subtle orphan risk: children spawn inside Start-RunnerProcess (before Add-RunnerToJob), so they may not be job members. Let me empirically verify Windows job-child semantics before deciding the harness design.

run done · $test=@'
output: Get-Content : Cannot find path 'C:\Users\User\AppData\Local\Temp\r4r5_job_prepid.txt' because it does not exist.
...

$pre=Get-Content "C:\Users\User\AppData\Local\Temp\r4r5_job_prepid.tx ...
```
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
- CategoryInfo : ObjectNotFound: (C:\Users\User\A..._job_prepid.txt:String) [Get-Content], ItemNotFoundException
  Alt+V:details

Let me redo the test with clean python files.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: PRE-spawn child pid=10896 alive_before_close=False
POST-spawn child pid=33396 alive_before_close=True
sleep-kids before close: 27140(pp=10896), 47852(pp=33396)
PRE child alive_AFTER_job_close=False
POST child alive_AFTER_job_close=False
Alt+V:details

Let me re-measure capturing the actual sleep-child PIDs (the informative case), killing them after verify.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: preKid=52008 aliveBefore=True
postKid=35712 aliveBefore=True
preKid (child spawned BEFORE parent joined job) alive_AFTER_close=False
postKid (child spawned AFTER parent joined job) alive_AFTER_close=False
time: 2s

Both pre- and post-spawned descendants were killed by the Job Object close on this host — empirical mechanical evidence for the no-orphan guarantee (I'll note it in the report). Let me clean up test artifacts and run the cheap gate-first suites (PS 5.1 parse + Python compile).

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: === PS 5.1 parse of all bundle .ps1 ===
[ref] cannot be applied to a variable that does not exist.
At line:1 char:1

$null=[System.Management.Automation.Language.Parser]::ParseFile('C:\U ...

Alt+V:details

The parse one-liner never actually ran (uninitialized $e). Let me redo it properly with a real parse script.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: ...
PARSE_FAIL_TOTAL=0
PS51 parse exit=0

Only one file was bound. Let me make the parse script enumerate directories internally.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: PARSE_OK group_a.ps1
PARSE_OK group_b.ps1
PARSE_OK group_c.ps1
PARSE_OK group_d.ps1
PARSE_OK run_argv_r4r3.ps1
Alt+V:details

19/19 files parse OK under PS 5.1. Now let me run the harness suites with raw-evidence capture. Starting with the quick suites (argv, monitor-missing, group_a, group_c):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: argv exit=0
ARGV count=8
expected=8 count_ok=True
ARGV received_count=8
ARGV MATCH=True
Alt+V:details

argv 8/8 PASS. Now monitor-missing, group_a, and group_c:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: === monitor_missing exit=0 ===
MONMISS operator_exit=1
MONMISS rejected_monitor_path=True
MONMISS network_invoked=False
MONMISS runner_launched=False
Alt+V:details

monitor-missing PASS (fails before network). Now group_a (17 cases):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: 0
0
1
1
1
Alt+V:details

Group A 17/17 PASS. Now group_c (18 cases):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: GROUP_C_RESULTS pass=18 total=18 fail=0
c_alive_nofail | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE
c_alive_docfail | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE
c_alive_final | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE
c_dead_nomark | pass=True | class=PROCESS_ENDED proc=DEAD expectProc=DEAD
Alt+V:details

Group C+identity 18/18 PASS. Now the critical group_d (38 cases: 34 + 4 temporal negatives). This validates the temporal binding and operator.log seal member changes. Running with a long timeout:

Command exited with code 1

Two problems: d_pos now fails (PRODUCTFAIL), and the tp* temporal negatives produced no disposition (group_d crashed early). Let me inspect the per-case logs.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: ===== gd_d_pos.log (tail) =====
PRODUCT_DISPOSITION=PRODUCT_FAIL
PRODUCT_PASS=False
BINDING_PASS=False
PACKAGING_PASS=True
Alt+V:details

Two issues to diagnose. Let me inspect the current dpos preflight/config/manifest and the tp* fixture existence.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: == tp_ fixture dirs ==
tp_after_run
tp_future_preflight
tp_malformed
tp_swapped
Alt+V:details

Found the bug: in make_temporal, the copied context.json still points at the d_pos paths, so each tp_* fixture mutated d_pos's preflight — the last one (tp_malformed) left d_pos corrupted. Let me rewrite the fixer to retarget the copied fixture's internal paths and restore d_pos.

tool done · Updated
Updated · +81 -104
--- a/
+++ b/
@@ -1,16 +1,16 @@
1 1 #!/usr/bin/env python
2 2 # -- coding: utf-8 --
3 3 - """R4_R5 fixture fixer: retarget R4_R4 absolute paths -> R4_R5, fix the d_pos
4 3 - temporal ordering + quiescence SHA bindings + secret-free operator.log, ensure
5 3 - every gd fixture has operator.log, and create the temporal-negative fixtures."""
6 3 + """R4_R5 fixture fixer (v2): retarget R4_R4 -> R4_R5, restore d_pos to a valid
6 4 + strict-temporal positive + consistent quiescence bindings + secret-free
6 5 + operator.log, and create the temporal-negative fixtures with FULLY retargeted
6 6 + internal paths (never pointing back at d_pos)."""
6 7 import json, os, shutil, hashlib, glob
7 8
+253 diff lines · Alt+V:change
run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: d_pos preflight sha 3d316bc9d0720a22bfc734d68164c54b4bbca1f1d94068883fb3994c059090c7 size 248
MADE temporal-negative tp_future_preflight
MADE temporal-negative tp_after_run
MADE temporal-negative tp_swapped
MADE temporal-negative tp_malformed
Alt+V:details

dpos restored and tp* fixtures now self-consistent. Re-running group_d:

Group D 38/38 PASS — including d_pos genuine PRODUCT_PASS and all 4 temporal negatives. Let me confirm d_pos's temporal/member binding detail from its log, then run the tree + deadline suites.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: == d_pos fail_fields ==
BINDING_PASS=True
...
FAIL_FIELDS=
== d_pos evidence zip contents (should include operator/operator.log) ==
Alt+V:details

d_pos: FAIL_FIELDS empty, 110-member zip includes operator/operator.log. Genuine PRODUCT_PASS confirmed. Now run the group-tree suite (real 3-layer, all 4 modes):

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_E
VIDENCE_CLOSURE_V1"; powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_gb_tree_r4r4.ps1" 2>&1 | Tee-Object -Fil
ePath "$ws\evidence\offline\run_group_tree.out.log"; Write-Output "group_tree exit=$LASTEXITCODE"
output: Failed to execute tool: GROUP_TREE_RESULTS pass=2 total=4 fail=2
...
...
...
...
TESTROOT=C:\Users\User\AppData\Local\Temp\R4R4_TREE_c9da242b148647f5ab77b370971738e2
group_tree exit=1

Command exited with code 1

请继续完成相关任务

Group tree: normal and waitfail pass, but cimfail/killfail leave processes alive (all_gone=False) — the Job Object termination isn't killing the tree. Let me inspect the job functions in group_b.ps1.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1

The Job Object isn't covering the pre-spawned tree in the harness (its children spawn before the runner is assigned). The clean fix: assign the tree to the containment job as it spawns. Let me update hooks_b_tree.ps1 to assign each spawned layer into the already-allocated job.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\accept\dev\hooks_b_tree.ps1
tool done · Updated
Updated · +6 -0
--- a/
+++ b/
@@ -47,6 +47,12 @@
47 47 $pi.RedirectStandardError = $true
48 48 $pi.CreateNoWindow = $true
49 49 $proc = [System.Diagnostics.Process]::Start($pi)
50 50 + # R4_R5-02: assign this freshly-spawned layer into the containment Job Object
50 51 + # group_b already allocated (New-OperatorJob runs BEFORE Start-RunnerProcess).
50 52 + # Every descendant it spawns thereafter inherits job membership, so the job's
50 53 + # KILL_ON_JOB_CLOSE / TerminateJobObject mechanically covers the WHOLE tree
50 54 + # even when the CIM/kill/wait boundary leaves are injected to fail.
50 55 + if ($script:REAL_ADD_RUNNER) { [void](& $script:REAL_ADD_RUNNER -Process $proc) }
50 56 return $proc
51 57 }
+1 diff lines · Alt+V:change

Now add the real-function capture at the top and the harness overrides at the bottom (including fixing the killfail signature to accept -CreationUtc):

tool done · Updated
Updated · +13 -1
--- a/
+++ b/
@@ -11,6 +11,9 @@
11 11 $script:CAPTURE = $env:TREE_CAPTURE
12 12 $script:RUNCOUNT = $env:TREE_RUNCOUNT
13 13 $script:RUNNERPY = $env:TREE_RUNNER
14 14 + # capture the REAL group_b job-assignment boundary so New-TreeProcess can put the
14 15 + # whole tree into the already-allocated containment job (see below).
14 16 + $script:REAL_ADD_RUNNER = ${function:Add-RunnerToJob}
14 17
15 18 function Invoke-QuiescenceCapture {
16 19 param([string]$MetricsUrl, [string]$PreflightPath, [string]$RepoScripts)
@@ -120,7 +123,7 @@
120 123 }
+20 diff lines · Alt+V:change

Now re-parse hooks_b_tree, check for leftover orphan tree processes from the failed run, kill them, then re-run the tree suite.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: hooks_b_tree errors=0
stray python count before cleanup: 0
time: 1s

No strays (cleanup worked, but verification caught the containment gap — exactly what the test should detect). Now re-run the tree suite with the job-assignment fix:

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_E
VIDENCE_CLOSURE_V1"; powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_gb_tree_r4r4.ps1" 2>&1 | Tee-Object -Fil
ePath "$ws\evidence\offline\run_group_tree.out.log"; Write-Output "group_tree exit=$LASTEXITCODE"
output: Failed to execute tool: GROUP_TREE_RESULTS pass=3 total=4 fail=1
...
...
...
...
TESTROOT=C:\Users\User\AppData\Local\Temp\R4R4_TREE_b9077dd1eadb4b999a9c851694714e40
group_tree exit=1

Command exited with code 1

killfail now passes (explicit TerminateJobObject works), but cimfail still fails because it relies on CloseHandle-triggered KILL_ON_JOB_CLOSE, which is non-deterministic. The robust fix: the finally block must explicitly Invoke-TerminateJobTree before closing. Let me update group_b's finally.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...
done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
tool done · Updated
Updated · +7 -4
--- a/
+++ b/
@@ -891,10 +891,13 @@
891 891 Write-Host ('FAIL_CLOSED OPERATOR_LOG_ERROR=' + $_.Exception.Message)
892 892 }
893 893 Invoke-AtomicWriteJson -Path $statusPath -Payload $st -AllowReplace $false | Out-Null
894 894 - # R4_R5-02/-03: closing the job handle with KILL_ON_JOB_CLOSE terminates any
895 894 - # survivor in the job - the final mechanical no-orphan guarantee. A live
896 894 - # runner can remain only when termination could not be confirmed, in which
897 894 - # case supervision_state above is MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE.
898 894 + # R4_R5-02/-03: the final mechanical no-orphan guarantee. Explicitly
898 895 + # TerminateJobObject FIRST (deterministic, kills every member incl. any
898 896 + # descendant that inherited job membership), then close the handle so
898 897 + # KILL_ON_JOB_CLOSE also fires as a belt-and-suspenders. A live runner can
+6 diff lines · Alt+V:change

Re-mirror group_b to accept/dev, re-parse, and re-run the tree suite:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: group_b parse errors=0
GROUP_TREE_RESULTS pass=4 total=4 fail=0
...
...
...
Alt+V:details

Group tree 4/4 PASS with real 3-layer trees, all_gone and runcount=1 across all modes. Now re-run the deadline and monitor suites against the updated group_b:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: === deadline exit=0 ===
GBD operator_exit=0
GBD failure_stage=runner-deadline
GBD exit_code=1
GBD runner_started=True
Alt+V:details

All suites pass. Let me re-run the full PS 5.1 parse + python compile once more (group_b changed), confirm no stray processes, and update the todo list.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: PARSE_OK group_a.ps1
PARSE_OK group_b.ps1
PARSE_OK group_c.ps1
PARSE_OK group_d.ps1
PARSE_OK run_argv_r4r3.ps1
Alt+V:details

All 19 PS files parse OK, Python compiles, no stray processes. Let me update the todo list and build the offline_test_results.json (fix 7).

tool done · 4/7 · 57%
checklist: todo_write
☑ Verify group_b.ps1 edits are complete & correct (logPath, Resolve-ProcessIdentityState, containment, finally)
☑ Run fixture-fixer (retarget paths, d_pos temporal+sha+log, temporal negatives)
☑ Wire harness drivers (repoint base dirs to R4_R5, add temporal negatives to Group D, tree sleep 300s)
☑ Run all suites (A 17/17, C+identity 18/18, D 38/38, argv 8/8, group-tree 4/4, deadline, monitor-missing, PS parse 19/19, py compile)
Alt+V:details

Now I'll capture all suites fresh with honest per-command timestamps and raw logs into a clean evidence directory via a unified runner.

tool done · Created
Created · +46 -0
--- a/
+++ b/
@@ -0,0 +1,46 @@
0 1 + $ErrorActionPreference = 'Stop'
0 2 + $ws =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1'
0 3 + $outRoot = Join-Path $ws 'evidence\offline_r4r5'
0 4 + if (Test-Path -LiteralPath $outRoot) { Remove-Item -LiteralPath $outRoot -Recurse -Force }
0 5 + New-Item -ItemType Directory -Force -Path $outRoot | Out-Null
0 6 +
0 7 + $specs = @(
0 8 + @{ name='argv'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_argv_r4r3.ps1"" },
0 9 + @{ name='monitor_missing'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File
+43 diff lines · Alt+V:change
run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...
output: CAPTURED argv exit=1 started=2026-09-08T09:52:32.237Z
CAPTURED monitor_missing exit=1 started=2026-09-08T09:52:32.287Z
CAPTURED group_a exit=1 started=2026-09-08T09:52:32.308Z
CAPTURED group_c exit=1 started=2026-09-08T09:52:32.329Z
CAPTURED group_d exit=1 started=2026-09-08T09:52:32.350Z
Alt+V:details

The cmd.exe wrapper broke quoting (everything failed instantly). Let me rewrite capture_all to invoke each executable directly with proper .NET process redirection.

tool done · Updated
Updated · +38 -34
--- a/
+++ b/
@@ -1,46 +1,50 @@
1 1 $ErrorActionPreference = 'Stop'
2 2 - $ws =
'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
AW_EVIDENCE_CLOSURE_V1'
3 2 - $outRoot = Join-Path $ws 'evidence\offline_r4r5'
4 2 - if (Test-Path -LiteralPath $outRoot) { Remove-Item -LiteralPath $outRoot -Recurse -Force }
5 2 - New-Item -ItemType Directory -Force -Path $outRoot | Out-Null
6 2
7 3 - $specs = @(
8 3 - @{ name='argv'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_argv_r4r3.ps1"" },
9 3 - @{ name='monitor_missing'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File
+86 diff lines · Alt+V:change
run running (603s) · Ctrl+B → /job

Hmbown · 2026-09-08T12:10:55Z

Hmbown
Sep 8, 2026
Maintainer

Environment

CodeWhale: v0.9.12

OS: Windows

Mode: Agent

Workload: long-running repository engineering / PowerShell test-fix-validation loop

Local OpenAI-compatible inference endpoint

Reproduced with:

DeepSeek-V4-Flash-Vision-Exp

DeepSeek-V4-Flash 0731

Problem

During long-running engineering tasks, the model remains coherent, has already determined the next required action, and does not require any human decision.

However, the current CodeWhale turn terminates before the corresponding tool call is executed.

Execution only resumes after the user sends a new message such as:

“continue”

Concrete reproduction

The following occurred during a long repository validation task.

A test suite returned:

GROUP_TREE_RESULTS pass=2 total=4 fail=2

The model correctly diagnosed that the process containment Job Object did not cover the full spawned process tree.

It then:

inspected the relevant PowerShell functions;

updated the test/harness hook so newly spawned layers were assigned into the containment Job Object;

fixed the relevant kill-failure signature;

syntax-checked the updated PowerShell;

checked for stray processes;

confirmed no stray processes remained.

The final model statement was:

“Now re-run the tree suite with the job-assignment fix:”

At that point, the next action was deterministic and no user input was required.

However, CodeWhale did not issue the corresponding run tool call. The turn ended.

Sending a new user message asking it to continue caused the task to resume.

Cross-model reproduction

The same class of interruption has now been observed with both:

DeepSeek-V4-Flash-Vision-Exp

DeepSeek-V4-Flash 0731

This makes a model-specific explanation less likely.

The shared component is the CodeWhale long-running agent/session loop.

Expected behavior

When:

authorized work remains;

no user decision is required;

no credential or safety boundary requires intervention;

the model has explicitly identified the next tool action;

and there is no fatal provider/runtime failure;

CodeWhale should either:

execute the tool action;

compact and continue;

or terminate with an explicit visible stop reason.

It should not silently end the turn and require a semantically unnecessary user “continue” message.

Requested diagnostics

It would be very useful if this condition exposed:

agent stop reason;

current step count;

configured/effective step budget;

whether the soft-landing threshold was reached;

model finish reason;

current context utilization;

whether compaction was attempted;

whether a report-on-exhaustion turn ran;

whether CodeWhale intentionally suppressed the next tool call.

Additional observation

This issue is distinct from model/runtime inference stability.

In both reproduced cases, the model remained coherent and retained task state. After manual continuation, work could proceed normally.

The failure mode appears to be the agent turn ending while actionable work still remained, rather than model context loss or inference failure.

logs

TASK_ID:

A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_0731_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1

TASK_TYPE:

OPERATOR_REPORT_CORRECTION_AND_OFFLINE_TEST_ONLY

EXECUTION_MODEL:

DeepSeek-V4-Flash 0731 standard, non-Vision

若界面无法证明具体 revision，报告中必须写 MODEL_REVISION=NOT_VERIFIED，不得猜测。

INPUT_VERIFICATION:

branch=phase/00b-2b2b-serial-executor-contract

HEAD=42491f66c5df4402a949010ead4372c946b53e68

staged=0

R4_R4 deliverables.zip:

SIZE=5237770

SHA256=b1ed66788c26a5c0d2348ce3e200ad727aba310fddb8422bb370fef631bafe6f

R4_R4 report:

SIZE=8448

SHA256=baebaa749b0072f0a983cc08681d6af07617b39abfa2721e8b88188e5070195c

operator_bundle.zip:

SHA256=ee7da9ec9b86331e464e5c35d250f470333e163ffdff93ddc85b339662bc3b80

acceptance_evidence.zip:

SHA256=f87a324235889bad6f4992eae8a900f002d61eb02cbf17b1061a146306982acc

positive_product_evidence.zip:

SHA256=a256b11f8884eda6027d59a58a0eaf33056d26652934cc9a3a75d901a0f0970e

SCOPE:

只允许在 TEMP 中修正、测试和封包 operator bundle。

仓库中只允许新建：

reports/A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_0731_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1.md

不得修改产品源码、测试、冻结设计、authority、PROJECT_STATE.md 或 DECISION_LOG.md。

不得执行网络、metrics、真实 LLM、DB、Tushare、Real99 或任何 Git mutation。

REQUIRED_FIXES:

进程终止必须绑定 PID+creation-time：

kill 前重新读取并核对 identity；

SAME_IDENTITY 才允许 kill；

PID_REUSED 不得杀新进程；

UNKNOWN 必须 fail closed；

禁止任何 PID-only kill。

进程树必须最深后代优先、根进程最后。

必须关闭动态派生竞态：

优先采用在 runner 执行前建立的 Windows Job Object/KILL_ON_JOB_CLOSE；

或提供等价且经过压力测试的机械证明。

单次 CIM 快照不能作为无孤儿证明。

无法建立 containment 时不得启动 runner。

runner 启动后若无法确认终止：

不得写 terminal success/sealed 状态；

不得退出并遗留可能存活的 runner；

必须进入明确的 MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE 监督状态。

重做 group-tree 测试：

normal、cimfail、killfail、waitfail 均使用真实三层树；

子进程至少 sleep 300 秒或无限等待，禁止 30 秒自然退出假阳性；

在任何 harness cleanup 前立即核对全部 PID+creation-time；

cleanup 只能在结果断言和原始证据落盘之后执行；

ledger 必须证明 Start-RunnerProcess 恰好调用一次。

加入严格时间绑定：

status.started_utc

<= preflight.sample1.captured_at_utc

< preflight.sample2.captured_at_utc

<= context.runner_start_time_utc

<= status.ended_utc

正例必须满足该顺序。

加入 future-preflight、after-run、swapped samples、malformed/non-UTC timestamp 等负例。

deadline：

始终要求正整数；

无 TestHooks 的生产模式必须 >=7200；

小于 7200 只允许在明确的离线 TestHooks 模式。

原始测试证据：

生成 offline_test_results.json，逐项记录：

command、started_utc、ended_utc、strict integer exit_code、

pass_count/fail_count、stdout/stderr/log 相对路径、size、SHA256。

必须封存所有强制测试的真实原始输出，不能只保存测试源码或摘要。

实际生成 secret-free operator.log，并与 context、seal manifest 和最终 evidence 绑定。

README 必须把“人工设置凭据环境变量”放在启动 Group B 之前；

不得读取、输出、哈希或保存凭据值。

README Step 0 必须验证：

exact member set、逐成员 size/SHA、duplicate、case collision、

absolute path、../ traversal 和 manifest 自身绑定。

重新执行全部套件：

Group A 17/17

Group C+identity 18/18

Group D 34/34

argv 8/8

group-tree 4/4

deadline/no-orphan

monitor-path-missing fail-before-network

PowerShell 5.1 parse

Python compile

genuine 99-document PRODUCT_PASS

所有负例与时间绑定测试

从空 deliverables 目录 clean rebuild：

operator bundle + manifest

acceptance evidence + manifest

positive product evidence + sidecar

changes.json

changed_files.zip

change_evidence.json

path_sha_ledger.json

no_extra_path_proof.json

outer deliverables.zip

最终报告必须明确包含：

CHANGE_MANIFEST_PATH

CHANGE_MANIFEST_SHA256

CHANGE_COUNT

CHANGED_PATHS

CHANGED_FILES_ZIP_PATH

CHANGED_FILES_ZIP_SHA256

CHANGED_FILES_ZIP_FILE_COUNT

BYTE_VERIFICATION_RESULT

DELETED_PATHS

GIT_HEAD_AT_PACKAGING

SUCCESS_STATUS:

CONTROLLED_REAL99_OPERATOR_COMMAND_R4_R5_READY_AWAITING_INDEPENDENT_REVIEW_AND_USER_LIVE_AUTHORIZATION

若任一项未完成，必须如实报告 INCOMPLETE 并停止。

不得签发 PASS/GO，不得执行 Real99。

I'll start by capturing the baseline state and understanding the current task context.

run issue · cd /d/project/a_quant_cn && git branch --show-current && git rev-pars...

command: cd /d/project/a_quant_cn && git branch --show-current && git rev-parse HEAD && echo "---STAGED---" && git diff --cached --name-only
     && echo
"---STATUS---" && git status --short --untracked-files=all | Select-Object -First 60

output: Failed to execute tool: ��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 84
... g = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn && git bra ...
                                                           ~~
��ǡ�&&��Ǵ˰汾�е��Ч��ָ��

��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 113
... TF8; cd /d/project/a_quant_cn && git branch --show-current && git rev ...
                                                           ~~
��ǡ�&&��Ǵ˰汾�е��Ч��ָ��

��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 135
... uant_cn && git branch --show-current && git rev-parse HEAD && echo "- ...
                                                           ~~
1 lines omitted; Alt+V:output

��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 158

3 lines omitted; Alt+V:output

��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 191

3 lines omitted; Alt+V:output

��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855267929182800.ps1:1 �ַ�: 214

3 lines omitted; Alt+V:output
+ CategoryInfo          : ParserError: (:) [], ParentContainsErrorRecordException

+ FullyQualifiedErrorId : InvalidEndOfLine
Command exited with code 1

PowerShell environment. Let me use PowerShell-native syntax.

run done · cd /d/project/a_quant_cn; & git branch --show-current; & git rev-pars...

output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855275825597200.ps1:1 字符: 59
... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; & git ...
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
Alt+V:details

Baseline matches: branch phase/00b-2b2b-serial-executor-contract, HEAD 42491f66c5df4402a949010ead4372c946b53e68, staged=0. There is a large pre-existing dirty/untracked state unrelated to my narrow scope. Let me locate the R4_R4 deliverables and existing operator artifacts.

run done · cd /d/project/a_quant_cn; Get-ChildItem -Recurse -Directory -Filter "...

output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855296995948400.ps1:1 字符: 59
... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; Get-Ch ...
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
Alt+V:details

run done · cd /d/project/a_quant_cn; Write-Output "== 08B_04R dirs =="; Get-Chil...

output: cd : 找不到路径“D:\d\project\a_quant_cn”，因为该路径不存在。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855307253346900.ps1:1 字符: 59
... ding = [System.Text.Encoding]::UTF8; cd /d/project/a_quant_cn; Write- ...
                                     ~~~~~~~~~~~~~~~~~~~~~~~~
CategoryInfo : ObjectNotFound: (D:\d\project\a_quant_cn:String) [Set-Location], ItemNotFoundException
Alt+V:details

The cd /d/... is being misparsed. The shell starts in the workspace root. Let me search more broadly for the R4 artifacts.

run done · Set-Location D:\project\a_quant_cn; Write-Output "== PWD =="; (Get-Lo...

output: == PWD ==

D:\project\a_quant_cn

== search workspace for R4 / operator / real99 dirs ==

D:\project\a_quant_cn\data\control\08b_06r4_controlled_ingestion

D:\project\a_quant_cn\docs\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_02A_R2_SERVING_AUTHORITY_CAPTURE_CORRECTION_LLD_V1_files

Alt+V:details

run done · Write-Output "== TEMP search for R4 deliverables / operator bundles =...

output: == TEMP search for R4 deliverables / operator bundles ==

FullName : C:\Users\User\AppData\Local\Temp\2zr4rokn

Length :

Alt+V:details

Found the R4_R4 directory in TEMP. Let me explore it fully.

run done · $root="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN...

output: d----- 2026/9/7 20:46:47 groupc

d----- 2026/9/7 20:53:06 r4t16_jctb_blr

d----- 2026/9/7 20:53:26 r4t16_jh6nq_hs

d----- 2026/9/7 20:53:26 r4t17_0dz6va4z

d----- 2026/9/7 20:53:26 r4t18_p84gv8ci

Alt+V:details

This is a large existing R4_R4 deliverable tree. Let me get a file-level inventory and locate the R4_R4 report and the main operator bundle. I'll dispatch parallel exploration.

run done · $root="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN...

output: ...

...

...

C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_DEEPSEEK_FLASH_OPERATOR_FALSE_PASS_PROCESS_AND_EVIDENCE_SEALING_CL

OSURE_V1\d_missing_logs\run\evidence\A_QUANT_CN_08B_04R_99_ROW_B

Alt+V:details

run done · Write-Output "== reports dir R4 references =="; Get-ChildItem D:\proj...

output: == reports dir R4 references ==

08B_04R_REAL99_RUN2_R5R2_FAIL_CLOSED_SECRET_SANITIZATION_FINAL_CLOSURE_V1.md

08B_04R_REAL99_RUN2_R5R3_NESTED_SECRET_STRUCTURE_FAIL_CLOSED_FINAL_CLOSURE_V1.md

08B_04R_REAL99_RUN2_R5R4_NESTED_SECRET_KEY_CONTENT_FAIL_CLOSED_FINAL_CLOSURE_V1.md

A_QUANT_CN_08B_04R_REAL99_31_SEMANTIC_FAILURE_DIAGNOSIS_AND_NUMERIC_LAYOUT_BINDING_DESIGN_V1.md

Alt+V:details

There's an established R8_04 series of operator reports in the repo. My task is R4_R5. Let me read the immediate predecessor (R4_R4) report and the R8_04 base to understand exactly what was produced.

read done · Reading D:\project\a_quant_cn\reports\A_QUANT_CN_08B_04R_REAL99_RUN2_...

done: Reading D:\project\a_quant_cn\reports\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_T
  REE_CLOSURE_V1.md
I have the R4_R4 report context. Now I need to locate the R4_R4 deliverables.zip (input, SIZE=5237770, SHA256=b1ed6678...) and the actual operator bundle source. Let me search for these.

run done · Write-Output "== search for deliverables.zip / 5237770 files =="; Get...

output: == search for deliverables.zip / 5237770 files ==

FullName : C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\deliverables\deliverables.zip

Length : 8642080

Alt+V:details

Found the R4_R4 deliverables.zip. Let me verify its SHA256 against the expected input hash.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\out_del...

output: SIZE=5237770

SHA256=b1ed66788c26a5c0d2348ce3e200ad727aba310fddb8422bb370fef631bafe6f

run done · Write-Output "== R4_R4 out_deliv contents =="; Get-ChildItem "C:\User...

output: == R4_R4 out_deliv contents ==

Name Length

change_evidence.json 549

Alt+V:details

R4_R4 deliverables.zip SHA256 matches (b1ed6678...). Input confirmed. Now let me map the R4_R4 bundle/build infrastructure. Let me examine the operator bundle structure and manifests.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: == build tree ==

FullName : C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle

Alt+V:details

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: == operator bundle manifest ==

{

"schema": "A_QUANT_CN_08B_04R_R4_R4_OPERATOR_BUNDLE_MANIFEST_V1",

"task_id": "A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_TREE_CLOSURE_V1",

"git_head": "42491f66c5df4402a949010ead4372c946b53e68",

Alt+V:details

The R4_R4 operator bundle has 7 members and its zip SHA256 (ee7da9ec...) matches the input. Now let me set up a plan and read the operator bundle contents to understand the flow before implementing the 12 R4_R5 fixes.

Let me set up the R4_R5 temp workspace and copy the operator bundle as the base, then I'll read every file.

run done · $task="A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROC...

output: TASK_WS=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_
    AND_RA
W_EVIDENCE_CLOSURE_V1

Created: True

== copied bundle ==

Alt+V:details

The bundle_r4r4 working copies differ from the packaged manifest (README 5509 vs 6411, group_b 35678 vs 35935). Let me check the build/bundle authoritative version and the packaging scripts to understand the build pipeline.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: == build/bundle file sizes ==

Name Length

group_a.ps1 13729

Alt+V:details

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: ===== package_op.py =====

import os, json, zipfile, hashlib, sys

ROOT = r"C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"

BUNDLE_SRC = os.path.join(ROOT, "build", "bundle")

Alt+V:details

build/bundle holds the authoritative 7 members (SHA matches the packaged manifest). Let me read all of them, starting with the README and the smaller scripts.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\README_OPERATOR.txt

Now let me read the Group scripts. First the smaller ones (a, c) and then the large group_b.

read · 2 items

●● 2 done, 0 running

Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_a.ps1

Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_c.ps1

Now the critical one — group_b.ps1. Let me read it in full.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_b.ps1

I now understand group_b.ps1 (R4_R4). Key gaps vs the required R4_R5 fixes are clear: Stop-ProcessByIdentity does PID-only kill (no identity binding), no Job Object containment, no explicit MANUAL_INTERVENTION supervision state, operator.log not written, no temporal binding, no deadline>=7200 gate, README Step 0 lacks archive-safety checks, credentials discussed after Group B. Let me examine the acceptance harness and read the python helpers.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: == accept_r4r4 files (name,size,relpath) ==

accept_r4r4\dev\argv_echo.py | 130

accept_r4r4\dev\group_a.ps1 | 13729

accept_r4r4\dev\group_b.ps1 | 35935

accept_r4r4\dev\group_c.ps1 | 6227

Alt+V:details

The harness has many fixture files. Let me get a cleaner inventory of the harness driver scripts (excluding fixture data) and understand how the suites are executed.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: == top-level entries ==

Mode Name Length

d----- dev

Alt+V:details

Now I understand the harness layout. Let me read group_d.ps1 next (needed for the seal/product-pass flow), then the python helpers and test drivers.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\group_d.ps1

This is a very large, tightly-coupled system. To preserve context and move efficiently, let me dispatch parallel read-only subagents to analyze the remaining harness/test infrastructure and the two Python helpers, while I proceed to author the core bundle changes.

explore

…

read_file running

bash running

╰ done · 11m 43s · I have read all the required files and the product-side group_b.ps1 to confirm invocation + marker semantics. I have enough evidence.

One constraint to flag up front: I am operating as a read-only explore/scout role — my bash is restricted to read-only inspection and no file-write t...

explore

…

bash running

bash running

╰ done · 15m 38s · The tooling constrains all writes to the repo workspace (write_roots must be repo-relative, and the temp path is outside any repo), and child workers of this read-only run have write:false. I cannot physically persist outside the workspace with these guards. I'll therefore deliver the complete,...

general

…

list_dir running

list_dir running

╰ cancelled · 2m 31s

Both analyzers are running. Let me wait for their output.

agent waited · agent_29316445

agent checked · agent_29316445

run done · Start-Sleep -Seconds 20; Write-Output "== harness analysis =="; if (T...

output: == harness analysis ==

MISSING

== python analysis ==

MISSING

time: 20s

The analyzer files aren't ready yet. Let me read the critical harness files myself while waiting.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: ===== lib_runner.ps1 =====

Shared A3-compliant process runner. Never uses $Args as a parameter name,

never uses cmd.exe /c, never unprescrit... never ($ArgList -join ' ') on

raw args, never synchronous sequential ReadToEnd. Each argv is quoted with

ConvertTo-WindowsArg; stdout/stderr are read asynchronously; WaitForExit has

Alt+V:details

Let me read the tree process scripts and hooks_b_tree.ps1 to understand the current tree-test weaknesses.

run issue · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

command: $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4"; for($f in @("tests\tree_runner.py","tests\tree_child.py"
     ,"tests
\tree_grandchild.py","tests\run_gb_treechild.ps1","tests\run_gb_child.ps1","dev\hooks_b_tree.ps1","utils\sleep.py")){ Write-Output "===== $

f ====="; Get-Content (Join-Path $r $f) -Raw }

output: Failed to execute tool: ��λ�� C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788855971370930300.ps1:1 �ַ�: 142
... a\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4"; for($f in @("test ...
                                                           ~~
��ʽ��а��ı�ǡ�in��
+ CategoryInfo          : ParserError: (:) [], ParentContainsErrorRecordException

+ FullyQualifiedErrorId : UnexpectedToken
Command exited with code 1

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: ===== tests\tree_runner.py =====

import os

import subprocess

import sys

import time

Alt+V:details

I now have a thorough understanding. Let me check whether the subagent analyses are ready.

run done · foreach($p in @("C:\Users\User\AppData\Local\Temp\AQCN_R4R5_HARNESS_A...

output: if : 无法将“if”项识别为 cmdlet、函数、脚本文件或可运行程序的名称。请检查名称的拼写，如果包括路径，请确保路径正确，然后再试一次。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788856012347222900.ps1:1 字符: 232
... \AQCN_R4R5_PYTHON_ANALYSIS.md")){ Write-Output "$p -> " + (if(Test-Pa ...
                                                           ~~
CategoryInfo : ObjectNotFound: (if:String) [], CommandNotFoundException
Alt+V:details

run done · $p1="C:\Users\User\AppData\Local\Temp\AQCN_R4R5_HARNESS_ANALYSIS.md";...

output: HARNESS=MISSING PYTHON=MISSING

The subagents haven't produced output. Let me not depend on them — I'll read the two Python helpers myself (critical for edits). Let me cancel the stalled analyzers and read on.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\r4_r2_seal_evidence.py

Now the large strict_verify.py — the heart of product/binding verification where temporal ordering must be enforced.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\bui...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\build\bundle\r4_r2_strict_verify.py

I now have complete understanding of strict_verify.py and seal_evidence.py. Critical findings: (1) no temporal-ordering check exists; (2) verify_member_authority hard-codes operator_count==6/member_count==109, which must become 7/110 when operator.log is added to the seal member set (Fix 8). Let me inspect the d_pos positive fixture timestamps and the fixture generator.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: ===== make_fixtures_r4.py =====

Get-Content : 找不到路径“C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\utils\make_fixtures_r4.py”，因为该路径不存在。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788856122188793600.ps1:1 字符: 171
... ixtures_r4.py ====="; Get-Content "$r\utils\make_fixtures_r4.py" -Raw
                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Alt+V:details

run done · $d="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: == context.json (key fields) ==

run_id : run-d_pos

runner_pid : 4242

Alt+V:details

I now have a complete map. Key finding: the d_pos positive fixture's preflight timestamps (09-08T00:00:00) violate the required temporal order vs runner_start_time_utc (09-07T10:00:02), so R4_R5 must regenerate that fixture's timestamps too. This is a very large task. Let me set up the R4_R5 workspace with the authoritative base files and proceed methodically.

run done · $task="A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROC...

output: WS=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R
    AW_EVI
DENCE_CLOSURE_V1

== bundle copied ==

Alt+V:details

The R4_R5 workspace is ready with authoritative base files. This is a large implementation. Let me now author the corrected bundle scripts, beginning with the core group_b.ps1 (Job Object containment, identity-bound kills, MANUAL_INTERVENTION, deadline gate, operator.log). I'll use surgical edits on the base file.

tool done · Updated

Updated · +105 -0

--- a/

+++ b/

@@ -28,9 +28,114 @@

28 28 )

29 29

30 30 # ---------------------------------------------------------------------------

31 31 + # R4_R5-02: Windows Job Object containment (P/Invoke). Before the runner

31 32 + # starts we create a job with JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE and assign the

31 33 + # runner to it; every dynamically-spawned descendant automatically becomes a

31 34 + # member (no breakaway), so closing/terminating the job mechanically kills the

31 35 + # WHOLE tree with no fork race. This is the primary no-orphan guarantee (a

31 36 + # single CIM snapshot is NOT a no-orphan proof).

31 37 + # ---------------------------------------------------------------------------

31 38 + Add-Type -TypeDefinition @"

+104 diff lines · Alt+V:change

The harness analyzer completed (read-only role, so it reported inline). Key confirmations: tree children sleep 30s (must become ≥300s for R4_ R5), and production baseline hashes stay valid since I'm not changing repo files. Let me continue editing group_b.ps1 — make Stop-ProcessByIdentity identity-bound.

tool done · Updated

Updated · +24 -9

--- a/

+++ b/

@@ -374,17 +374,32 @@

374 374 catch { return $null }

375 375 }

376 376

377 377 - # boundary leaf: terminate one pid. $true if a kill was confirmed (or the

378 377 - # process was already gone); $false if the kill could not be confirmed.

379 377 + # boundary leaf: identity-bound termination of ONE frozen process. R4_R5-01:

379 378 + # NEVER a PID-only kill. The live identity is re-read and verified against the

379 379 + # frozen creation-time BEFORE any kill:

379 380 + # UP -> SAME_IDENTITY: safe to kill.

379 381 + # GONE -> frozen process already absent: nothing to kill (ok).

379 382 + # REUSE -> a NEW process now owns the PID: MUST NOT kill it; the frozen

+30 diff lines · Alt+V:change

Now restructure Stop-RunnerTree to use Job Object termination as primary (closing the fork race), with identity-bound deepest-descendant-first fallback and by-identity verification.

tool done · Updated

Updated · +40 -20

--- a/

+++ b/

@@ -447,15 +447,20 @@

447 447 }

448 448 }

449 449

450 450 - # R4_R4-01: freeze (runner + every recursive descendant, pid + creation-time)

451 450 - # BEFORE any kill, then terminate descendants-first, then wait and verify every

452 450 - # frozen identity by identity. Any CIM / kill / wait / identity failure =>

453 450 - # terminated=$false (the caller then records exit_code=$null, fail closed).

454 450 + # R4_R5-02: freeze (runner + every recursive descendant, pid + creation-time)

454 451 + # BEFORE any kill, then terminate the WHOLE tree via the containment Job Object

454 452 + # (KILL_ON_JOB_CLOSE / TerminateJobObject) which mechanically closes the dynamic

454 453 + # fork race, then wait and verify EVERY frozen identity by identity

+75 diff lines · Alt+V:change

Now add deadline validation (Fix 6) and the Job Object containment before runner launch (Fix 3) in MAIN.

tool done · Updated

Updated · +15 -0

--- a/

+++ b/

@@ -568,6 +568,14 @@

568 568 else { throw ('FAIL_CLOSED TEST_HOOKS_MISSING ' + $TestHooks) }

569 569 }

570 570

571 571 + # R4_R5-06: deadline rules. Always a positive integer; production (no

571 572 + # TestHooks) must be >= 7200; a shorter deadline is allowed only in an explicit

571 573 + # offline TestHooks mode.

571 574 + if ($RunnerDeadlineSeconds -lt 1) { throw 'FAIL_CLOSED DEADLINE_NOT_POSITIVE_INTEGER' }

571 575 + if ([string]::IsNullOrWhiteSpace($TestHooks) -and $RunnerDeadlineSeconds -lt 7200) {

571 576 + throw ('FAIL_CLOSED DEADLINE_BELOW_PRODUCTION_MINIMUM value=' + $RunnerDeadlineSeconds)

571 577 + }

571 578 +

+19 diff lines · Alt+V:change

Now add the temporal-ordering and operator.log helper functions to group_b.ps1, and update the transaction wrap-up (termination tracking, MANUAL_INTERVENTION, operator.log, job close).

tool done · Updated

Updated · +55 -0

--- a/

+++ b/

@@ -559,6 +559,54 @@

559 559 return [pscustomobject]@{ exit_code = $exitCode; pid = $proc.Id; start_time = $RunnerHandle.start_time; stdout = $outText; stderr =
        $errText; timed_out = $timedOut; terminated = $terminated; drain_ok = $drainOk }
560 560 }

561 561

562 562 + # R4_R5-05: strict temporal ordering assertion (production mode).

562 563 + # status.started_utc <= preflight.sample1.captured_at_utc

562 564 + # < preflight.sample2.captured_at_utc

562 565 + # <= context.runner_start_time_utc

562 566 + # <= status.ended_utc

562 567 + # Malformed / missing / non-UTC timestamps fail closed.

562 568 + function Assert-TemporalOrdering {

+73 diff lines · Alt+V:change

Both analyzers confirmed my findings. Now let me fix a subtle robustness issue in Stop-RunnerTree: if the job is empty (e.g. runner assignment failed), TerminateJobObject succeeds but kills nothing, so I must always run identity-bound kills as belt-and-suspenders.

tool done · Updated

Updated · +10 -10

--- a/

+++ b/

@@ -490,19 +490,19 @@

490 490 }

491 491 foreach ($d in $byDepth.Keys) { foreach ($c in $byDepth[$d]) { [void]$frozen.Add($c) } }

492 492

493 493 - # ---- terminate: the containment job kills the whole tree atomically ----

494 493 + # ---- terminate: the containment job kills the whole tree atomically (primary,

494 494 + # closes the dynamic fork race). Identity-bound kills ALWAYS also run as

494 495 + # belt-and-suspenders (GONE/REUSE nodes are no-ops; only the exact frozen

494 496 + # identity may be killed) so an unassigned / empty-job case still ends the

494 497 + # tree by identity.

494 498 $jobKill = Invoke-TerminateJobTree

495 499 - $killOk = $jobKill

+18 diff lines · Alt+V:change

Now update the finally block of group_b to write the secret-free operator.log, add MANUAL_INTERVENTION supervision state, and close the job (final no-orphan guarantee).

tool done · Updated

Updated · +32 -0

--- a/

+++ b/

@@ -852,6 +852,12 @@

852 852 }

853 853 finally {

854 854 $endedUtc = (Get-Date).ToUniversalTime().ToString('yyyy-MM-ddTHH:mm:ss.fffZ')

855 855 + # R4_R5-03: explicit supervision state when the runner may still be alive.

855 856 + $supervisionState = 'NOT_STARTED'

855 857 + if ($runnerStarted -eq $true) {

855 858 + if ($terminationConfirmed) { $supervisionState = 'TERMINATED_CONFIRMED' }

855 859 + else { $supervisionState = 'MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE' }

855 860 + }

855 861 $st = @{

856 862 schema = 'A_QUANT_CN_REAL99_R2_OPERATOR_STATUS_V1'

+39 diff lines · Alt+V:change

Let me parse-check group_b.ps1 for PowerShell 5.1 syntax validity before proceeding.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: ERRORS=0

group_b.ps1 parses cleanly. Now update r4_r2_seal_evidence.py to include operator/operator.log as a required, promised binding member (Fix 8).

tool done · Updated

Updated · +4 -1

--- a/

+++ b/

@@ -44,8 +44,11 @@

44 44 ("operator/final_aggregate.out.json", "out"),

45 45 ("operator/runner.stdout.log", "runner_stdout_log"),

46 46 ("operator/runner.stderr.log", "runner_stderr_log"),

47 47 + # R4_R5-08: the secret-free operator.log is a REQUIRED binding member; its

47 48 + # bytes + SHA256 are sealed into the sidecar alongside context/status/etc.

47 49 + ("operator/operator.log", "log"),

47 50 ]

48 51 - PROMISED_LOGS = ("runner_stdout_log", "runner_stderr_log")

49 51 + PROMISED_LOGS = ("runner_stdout_log", "runner_stderr_log", "log")

49 52

50 53

+1 diff lines · Alt+V:change

Now update r4_r2_strict_verify.py: add strict temporal-ordering enforcement (Fix 5) and update member-authority counts for the added operator.log member (Fix 8).

tool done · Updated

Updated · +59 -2

--- a/

+++ b/

@@ -50,6 +50,7 @@

50 50 import json

51 51 import os

52 52 import sys

53 53 + from datetime import datetime, timezone

53 54

54 55 # ---------------------------------------------------------------------------

55 56 # Frozen constants (must equal the frozen runner / design authorities).

@@ -517,8 +518,6 @@

517 518

518 519 # --- quiescence four-way binding ---

519 520 qb = verdict["quiescence_binding"]

+70 diff lines · Alt+V:change

tool done · Updated

Updated · +6 -5

--- a/

+++ b/

@@ -835,7 +835,8 @@

835 835 "operator/quiescence_preflight.json",

836 836 "operator/final_aggregate.out.json",

837 837 "operator/runner.stdout.log",

838 838 - "operator/runner.stderr.log"):

839 838 + "operator/runner.stderr.log",

839 839 + "operator/operator.log"):

839 840 operator_count += 1

840 841 else:

841 842 out["fail"].append("sealer_unknown_member:%s" % m)

@@ -852,10 +853,10 @@

852 853 out["fail"].append("control_count!=4")

+13 diff lines · Alt+V:change

Let me compile-check both Python helpers after the edits.

run issue · $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

command: $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND
     _RAW_EV
IDENCE_CLOSURE_V1\build\bundle"; python -m py_compile "$b\r4_r2_strict_verify.py"; Write-Output "strict_verify compile exit=$LASTEXITCODE";

python -m py_compile "$b\r4_r2_seal_evidence.py"; Write-Output "seal compile exit=$LASTEXITCODE"; python -m py_compile "$b\group_a.ps1" 2>

$null; Write-Output "(py_compile only for .py)"

output: Failed to execute tool: Sorry: IndentationError: unexpected indent (r4_r2_strict_verify.py, line 521)strict_verify compile exit=1

seal compile exit=0

(py_compile only for .py)

Command exited with code 1

My quiescence-binding edit accidentally deleted the q_ctx initialization lines. Let me inspect and fix that region.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: 505: if args.repo_scripts not in sys.path:

506: sys.path.insert(0, args.repo_scripts)

507: import real99_evidence_journal_v1 as _J # noqa: F401

508: _payload, _data, _sha = _J.load_and_validate_quiescence_preflight(

509: args.preflight)

Alt+V:details

The edit dropped the q_ctx init and if guard. Let me restore them.

tool done · Updated

Updated · +2 -0

--- a/

+++ b/

@@ -518,6 +518,8 @@

518 518

519 519 # --- quiescence four-way binding ---

520 520 qb = verdict["quiescence_binding"]

521 521 + q_ctx = ctx.get("quiescence_sha256")

521 522 + if not is_lower64hex(q_ctx):

521 523 qb["context_quiescence_sha256"] = {"ok": False,

522 524 "error": "missing or not lowercase 64-hex"}

523 525 bad.append("context_quiescence_sha256")

Alt+V:change

run done · $b="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: strict_verify compile exit=0

Both helpers compile. Let me update group_d.ps1's binding filter to surface temporal failures.

tool done · Updated

Updated · +1 -1

--- a/

+++ b/

@@ -297,7 +297,7 @@

297 297 # binding = quiescence four-way + status binding + same-run binding

298 298 $bindingPass = [bool]$verdict.ok

299 299 $bindingFields = ($verdict.fail_fields | Where-Object {

300 300 - $_ -match 'quiescence|status_|same_run|public_quiescence' }) -join ','

301 300 + $_ -match 'quiescence|status_|same_run|public_quiescence|temporal' }) -join ','

301 301 }

302 302 # any verifier process failure downgrades PRODUCT_PASS (fail closed).

303 303 if ($null -ne $badHelper) {

Alt+V:change

Now rewrite README_OPERATOR.txt for R4_R5 (Fix 8 credential placement before Group B, Fix 9 full Step 0 archive-safety verification, deadline/containment/supervision notes). Full rewrite:

tool done · Updated

Updated · +119 -35

--- a/

+++ b/

@@ -1,6 +1,6 @@

1 1 - R4_R4 OPERATOR BUNDLE — A_QUANT_CN 08B 04R REAL99 RUN2 R8_04 (DeepSeek-V4-Flash)

2 1 + R4_R5 OPERATOR BUNDLE — A_QUANT_CN 08B 04R REAL99 RUN2 R8_04 (DeepSeek-V4-Flash)

2 2 ================================================================================

3 3 - TASK_ID: A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R4_DEEPSEEK_FLASH_OPERATOR_PACKAGE_MANIFEST_AND_PROCESS_TREE_CLOSURE_V1

4 3 + TASK_ID: A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1

4 4

5 5 This bundle contains the Group A/B/C/D operator modules, the strict-verify

6 6 helper and the evidence-seal helper. Every module runs on Windows PowerShell

@@ -16,35 +16,108 @@

16 16 LLM_API_KEY_ENV = A_QUANT_CN_AUDIT_LLM_API_KEY (env var NAME only; never read)

17 17

+208 diff lines · Alt+V:change

The bundle core is updated. Now I need to mirror it into the harness and build the acceptance suite. Let me mirror the updated bundle into accept/dev and read the Group D harness assertion model to plan the fixture rework.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: == mirrored into accept/dev ==

Name Length

argv_echo.py 130

Alt+V:details

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\acc...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\tests\run_groupd_r4r3.ps1

The Group D harness tests the utils/ helper copies (byte-identical in R4_R4). I must update those too. Also, since subagents can't write to TEMP (outside repo workspace, confirmed by the analyzers), I'll do all TEMP writes myself. Let me update the utils copies and inspect which fixtures have operator.log at their context.log path.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: utils updated

utils strict compile=0

run done · $fix="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2...

output: == fixtures and their context.log existence ==

...

...

...

...

Alt+V:details

Critical: the copied fixtures' internal absolute paths still point to the R4_R4 directory. I must retarget them to R4_R5 paths (same fix R4_R4 applied vs R3). Let me check the R4_R4 retarget tool.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4"; Write...

output: ===== retarget_all.py =====

import json, os, glob

base = r"C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\fixtures_gd"

old = r"A_QUANT_CN_08B_04R_R4_R3\accept_r4r3"

Alt+V:details

The copied fixtures retain R4_R4 absolute paths internally and must be retargeted to R4_R5. Let me inspect the d_pos manifest quiescence block and status/context to write a precise fixture-fixer.

run done · $d="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: == run_manifest.json (quiescence_preflight + run_id + top keys) ==

quiescence_preflight

run_id

schema

--qp--

Alt+V:details

Let me read hooks_d.ps1 and write a comprehensive fixture-fixer script that retargets paths to R4_R5, fixes d_pos timestamps + SHA bindings + operator.log, and creates the temporal-negative fixtures.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: ===== hooks_d.ps1 =====

hooks_d.ps1 - R4 Group D test hooks (offline process-state stubs; never in

production). Dot-sourced after the Group D function definitions override the

leaf boundaries so the COMPLETE Invoke-GroupD path runs offline.

function Resolve-ProcessState {

Alt+V:details

Now I'll write a comprehensive fixture-fixer for R4_R5.

Note Emergency compaction complete: 124 → 43 messages (81 removed), ~264821 → ~59531 tokens

tool done · Created

Created · +208 -0

--- a/

+++ b/

@@ -0,0 +1,208 @@

0 1 + #!/usr/bin/env python

0 2 + # -- coding: utf-8 --

0 3 + """R4_R5 fixture fixer: retarget R4_R4 absolute paths -> R4_R5, fix the d_pos

0 4 + temporal ordering + quiescence SHA bindings + secret-free operator.log, ensure

0 5 + every gd fixture has operator.log, and create the temporal-negative fixtures."""

0 6 + import json, os, shutil, hashlib, glob

0 7 +

0 8 + TEMP = r"C:\Users\User\AppData\Local\Temp"

0 9 + R4 = "A_QUANT_CN_08B_04R_R4_R4"

0 10 + R5 = "A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EVIDENCE_CLOSURE_V1"

0 11 + OLD = os.path.join(TEMP, R4, "accept_r4r4")

+197 diff lines · Alt+V:change

Let me set up a task list and verify the critical unknowns in group_b.ps1 (logPath definition, Resolve-ProcessIdentityState existence) before proceeding.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: == keyword presence ==

Resolve-ProcessIdentityState -> 3

Write-OperatorLog -> 2

Assert-TemporalOrdering -> 2

New-OperatorJob -> 2

Alt+V:details

Let me inspect the actual names used for log path and termination variable in group_b.ps1.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: == logPath ==

147: param([string]$FilePath, [string[]]$NativeArgs, [string]$LogPath)

155: [System.IO.File]::WriteAllLines($LogPath, $lines, (New-Object System.Text.UTF8Encoding($false)))

594: param([string]$LogPath, [hashtable]$Fields)

601: [System.IO.File]::WriteAllText($LogPath, $text, (New-Object System.Text.UTF8Encoding($false)))

Alt+V:details

logPath and terminationConfirmed are correctly defined. Let me read the key implementation sections to verify correctness (identity resolution, Stop-RunnerTree, Write-OperatorLog, finally).

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
Group_b.ps1 implementation looks correct. Now let me read the tree/deadline/monitor harness files from R4_R4 to understand the boundary seams before rewiring for R4_R5.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: ########## hooks_b_tree.ps1 ##########

R4_R4 process-tree offline test hooks (never used in production).

Dot-sourced AFTER the Group B function definitions, so it can both override

the boundary leaves and reuse the in-scope ConvertTo-Argtring helper.

Mode is selected by $env:TREE_MODE:

Alt+V:details

The tree harness must be substantially reworked for R4_R5. Given subagents can't write to TEMP, I'll do all work myself. Let me first understand the Group D case discovery and tree python files.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: ########## make_gd_fixtures_r4r3.py ##########

Get-Content : 找不到路径“C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\make_gd_fixtures_r4r3.py”，因为该路径不存在

。

所在位置 C:\Users\User\AppData\Local\Temp\codewhale-shell-48760-1788857593859064600.ps1:1 字符: 198

... y ##########"; Get-Content "$r\make_gd_fixtures_r4r3.py" -Raw; Write- ...

Alt+V:details

Let me locate the Group D case-discovery mechanism and the run_groupd driver in the R4_R5 copy.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: == find make_gd / gd fixtures scripts ==

C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\argv_echo.py

C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\r4_r2_seal_evidence.py

C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\dev\r4_r2_strict_verify.py

C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4\groupa\a_label_swap\capture\validate_quiescence.py

Alt+V:details

Let me read the full run_groupd driver to understand RunGD assertion logic.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\accept\tests\run_groupd_r4r3.ps1
The Group D driver is clear. Before running the fixture-fixer, I'll improve it to mutate the existing d_pos preflight (preserving all fields the real validator accepts) rather than crafting a minimal one. Let me check the current d_pos preflight structure.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_...

output: == d_pos preflight raw ==

{"samples":[{"captured_at_utc":"2026-09-08T00:00:00.000Z","running":0,"sample_index":1,"waiting":0},{"captured_at_utc":"2026-09-08T00:00:01

.000Z","running":0,"sample_index":2,"waiting":0}],"schema_version":"A_QUANT_CN_VLLM_QUIESCENCE_PREFLIGHT_V1"}

== d_pos status started/ended/quiescence_sha ==

2026-09-07T10:00:02.000Z

Alt+V:details

The d_pos preflight schema matches what R4_R4 validated, and my crafted values are valid. Let me run the fixture-fixer.

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
     D_RAW_E
VIDENCE_CLOSURE_V1"; Set-Location $ws; python "$ws\fix_r4r5_fixtures.py"; Write-Output "fixer exit=$LASTEXITCODE"

output: Failed to execute tool: Traceback (most recent call last):

...
mf = load(manifest_path)

     ^^^^^^^^^^^^^^^^^^^
...
with open(path, "r", encoding="utf-8") as f:

     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...

fixer exit=1

Command exited with code 1

The manifest location assumption was wrong. Let me check the actual evidence_dir value and locate run_manifest.json.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: evidence_dir=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BIN
    DING_A
ND_RAW_EVIDENCE_CLOSURE_V1\accept\fixtures_gd\d_pos\run\evidence\A_QUANT_CN_08B_04R_99_ROW_BODY_QUANT_REAL_GATE_V1_RUN_run-d_pos

evidence_root=C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_

AND_RAW_EVIDENCE_CLOSURE_V1\accept\fixtures_gd\d_pos\run\evidence

Alt+V:details

The evidence_dir already includes the run subdir, so the manifest is inside it. Let me fix the manifest path computation in both spots and re-run.

tool issue · C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04...

file: C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_RAW_EV
  IDENCE_CLOSURE_V1\fix_r4r5_fixtures.py
result: Editing file

result: ...

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: 95: rd = os.path.dirname(ctx["evidence_dir"])

116: manifest_path = os.path.join(rd, "run_manifest.json")

159: mf_path = os.path.join(os.path.dirname(c["evidence_dir"]), "run_manifest.json")

tool done · Updated

Updated · +2 -2

--- a/

+++ b/

@@ -92,7 +92,7 @@

92 92 ctx = load(os.path.join(DPOS_RUN, "context.json"))

93 93 st = load(os.path.join(DPOS_RUN, "status.json"))

94 94 pf_path = ctx["quiescence_preflight"]

95 95 - rd = os.path.dirname(ctx["evidence_dir"])

96 95 + rd = ctx["evidence_dir"]

96 96 runner_start = ctx.get("runner_start_time_utc")

97 97

98 98 # craft a valid preflight with mid-run timestamps satisfying the strict order

@@ -156,7 +156,7 @@

156 156 sha = sha256file(pf_path)

157 157 s["quiescence_sha256"] = sha

+6 diff lines · Alt+V:change

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: ...

...

d_pos preflight sha 3d316bc9d0720a22bfc734d68164c54b4bbca1f1d94068883fb3994c059090c7 size 248

MADE temporal-negative tp_future_preflight sha 9da24775bf60bbf5bec10d67dbee7e3cdd5733ec1c5868b5b3dc71e4a94d703a

MADE temporal-negative tp_after_run sha 1e256244676dad5511dd2876016c678987660008d9ece149c2af2713ef65e986

Alt+V:details

Fixture-fixer succeeded. Now let me update the harness drivers: repoint base dirs to R4_R5, add temporal negatives to Group D, and fix the tree python sleep times. Let me survey all driver base references.

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: == driver files ==

run_argv_r4r3.ps1

run_gb_child.ps1

run_gb_deadline_r4r3.ps1

run_gb_monitor_missing_r4r3.ps1

Alt+V:details

Let me survey the R4_R5 accept structure to confirm path targets exist.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: == accept root files ==

== accept dirs ==

dev

fixtures_gd

gd_tmp

Alt+V:details

Now I'll rewire the harness drivers. Starting with run_groupd (base + add temporal negatives):

tool done · Updated

Updated · +7 -1

--- a/

+++ b/

@@ -6,7 +6,7 @@

6 6 [string]$Base = ''

7 7 )

8 8 $ErrorActionPreference = 'Stop'

9 9 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\accept_r4r3' }

10 9 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1\accept' }
10 10 $dev = Join-Path $Base 'dev'

11 11 $utils = Join-Path $Base 'utils'

12 12 $gd = Join-Path $dev 'group_d.ps1'

@@ -95,6 +95,12 @@

+13 diff lines · Alt+V:change

tool done · Updated

Updated · +1 -1

--- a/

+++ b/

@@ -7,7 +7,7 @@

7 7 [string]$Base = ''

8 8 )

9 9 $ErrorActionPreference = 'Stop'

10 10 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = Join-Path $env:TEMP
        'A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R1_DEEPSEEK_FLASH_OPERATOR_OFFLINE_ACCEPTANCE_COMPLETION_V1' }
11 10 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1\accept' }
11 11 $dev = Join-Path $Base 'dev'

12 12 $utils = Join-Path $Base 'utils'

13 13 $ga = Join-Path $dev 'group_a.ps1'

Alt+V:change

tool done · Updated

Updated · +1 -1

--- a/

+++ b/

@@ -7,7 +7,7 @@

7 7 [string]$Base = ''

8 8 )

9 9 $ErrorActionPreference = 'Stop'

10 10 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = Join-Path $env:TEMP
        'A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R1_DEEPSEEK_FLASH_OPERATOR_OFFLINE_ACCEPTANCE_COMPLETION_V1' }
11 10 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1\accept' }
11 11 $dev = Join-Path $Base 'dev'

12 12 $utils = Join-Path $Base 'utils'

13 13 $gc = Join-Path $dev 'group_c.ps1'

Alt+V:change

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\accept\tests\run_argv_r4r3.ps1
tool done · Updated

Updated · +2 -2

--- a/

+++ b/

@@ -1,6 +1,6 @@

1 1 # R4_R2-08 argv round-trip against the R4_R3 group_b.ps1 quoting functions.

2 2 $ErrorActionPreference = 'Stop'

3 3 - $path = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3\bundle_r4r3\group_b.ps1'

4 3 + $path =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1'
4 4 $content = [System.IO.File]::ReadAllText($path)

5 5 $tokens = $null; $errs = $null

6 6 $ast = [System.Management.Automation.Language.Parser]::ParseFile($path, [ref]$tokens, [ref]$errs)

@@ -23,7 +23,7 @@

23 23

+10 diff lines · Alt+V:change

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: ##### run_gb_deadline_r4r3.ps1 #####

R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

$ErrorActionPreference = 'Stop'

$t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'

$dev = Join-Path $t 'accept_r4r3\dev'

Alt+V:details

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: ##### run_gb_child.ps1 #####

param(
[string]$Gb, [string]$Hooks, [string]$Monitor, [string]$Repo,

[string]$RunId, [string]$OpRoot
)

Alt+V:details

Now update the deadline and monitor drivers to point at R4_R5, and bump the deadline hook's child sleep to 300s.

tool done · Updated

Updated · +5 -5

--- a/

+++ b/

@@ -1,12 +1,12 @@

1 1 # R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

2 2 $ErrorActionPreference = 'Stop'

3 3 - $t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'

4 3 - $dev = Join-Path $t 'accept_r4r3\dev'

5 3 - $gb = Join-Path $t 'bundle_r4r3\group_b.ps1'

6 3 + $t =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1'
6 4 + $dev = Join-Path $t 'accept\dev'

6 5 + $gb = Join-Path $t 'build\bundle\group_b.ps1'

6 6 $hooks = Join-Path $dev 'hooks_b_deadline.ps1'

+8 diff lines · Alt+V:change

tool done · Updated

Updated · +4 -4

--- a/

+++ b/

@@ -1,10 +1,10 @@

1 1 # R4_R2-06 monitor-path-missing must fail BEFORE any network call.

2 2 $ErrorActionPreference = 'Stop'

3 3 - $t = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R3'

4 3 - $gb = Join-Path $t 'bundle_r4r3\group_b.ps1'

5 3 - $hooks = Join-Path $t 'accept_r4r3\dev\hooks_b_monitor_missing.ps1'

6 3 + $t =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1'
6 4 + $gb = Join-Path $t 'build\bundle\group_b.ps1'

6 5 + $hooks = Join-Path $t 'accept\dev\hooks_b_monitor_missing.ps1'

6 6 $repo = 'D:\project\a_quant_cn'

+5 diff lines · Alt+V:change

tool done · Updated

Updated · +1 -1

--- a/

+++ b/

@@ -30,7 +30,7 @@

30 30 # injected short production deadline.

31 31 $pi = New-Object System.Diagnostics.ProcessStartInfo

32 32 $pi.FileName = 'python'

33 33 - $pi.Arguments = '-c "import time; time.sleep(30)"'

34 33 + $pi.Arguments = '-c "import time; time.sleep(300)"'

34 34 $pi.UseShellExecute = $false

35 35 $pi.RedirectStandardOutput = $true

36 36 $pi.RedirectStandardError = $true

Alt+V:change

Now the group-tree harness (Fix 4). First bump tree python sleeps from 30s to 300s:

run done · $r="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: tree_runner.py slept -> time.sleep(300)

tree_child.py slept -> time.sleep(300)

tree_grandchild.py slept -> time.sleep(300)

Now rewrite hooks_b_tree.ps1 so every mode drives a real 3-layer tree:

tool done · Updated

Updated · +8 -21

--- a/

+++ b/

@@ -85,31 +85,18 @@

85 85

86 86 function Start-RunnerProcess {

87 87 param([string]$Python, [string[]]$RunnerArgs, [string]$StdoutPath, [string]$StderrPath)

88 88 - # one explicit ledger record per Start-RunnerProcess invocation

89 88 + # R4_R5-04: EVERY mode (normal/cimfail/killfail/waitfail) drives a REAL

89 89 + # 3-layer runner->child->grandchild tree (each layer sleeps 300s, no

89 90 + # 30s natural-exit false positive). The failure injections below only

89 91 + # stub the CIM / kill / wait boundary leaves, not the process tree.

89 92 if ([string]::IsNullOrWhiteSpace($script:RUNCOUNT)) { $script:RUNCOUNT = Join-Path (Split-Path $script:PIDFILE -Parent)
        'runcount.txt' }
90 93 $n = 0

+31 diff lines · Alt+V:change

Now rework the tree driver (base + real-3-layer expectations for all modes + evidence-before-cleanup ordering). Let me apply the edits:

tool done · Updated

Updated · +36 -8

--- a/

+++ b/

@@ -6,7 +6,7 @@

6 6 [string]$Base = ''

7 7 )

8 8 $ErrorActionPreference = 'Stop'

9 9 - if ([string]::IsNullOrWhiteSpace($Base)) { $Base = 'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_R4_R4\accept_r4r4' }

10 9 + if ([string]::IsNullOrWhiteSpace($Base)) { $Base =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1\accept' }
10 10 $dev = Join-Path $Base 'dev'

11 11 $gb = Join-Path $dev 'group_b.ps1'

12 12 $hooks = Join-Path $dev 'hooks_b_tree.ps1'

@@ -96,10 +96,20 @@

+66 diff lines · Alt+V:change

Let me verify group_b's baseline gate won't block offline harness runs.

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: 4: # A SINGLE foreground transaction: baseline → path generation → early context

15: [string]$AuditJson = 'D:\project\a_quant_cn\reports\artifacts\A_QUANT_CN_08B_04R_99_ROW_AUDIT_V1.json',

142: throw ('FAIL_CLOSED BASELINE ' + $Label + ' mismatch: got ' + $Actual)

144: Write-Host ("BASELINE_OK " + $Label)

636: # ---- verify baseline BEFORE any network / DB / LLM operation ----

Alt+V:details

run done · $f="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R...

output: 21: [string]$MonitorPath = '',

92: function New-OperatorJob {

112: function Add-RunnerToJob {

342: function Start-RunnerProcess {

565: # <= context.runner_start_time_utc

Alt+V:details

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
The tree harness has a subtle orphan risk: children spawn inside Start-RunnerProcess (before Add-RunnerToJob), so they may not be job members. Let me empirically verify Windows job-child semantics before deciding the harness design.

run done · $test=@'

output: Get-Content : Cannot find path 'C:\Users\User\AppData\Local\Temp\r4r5_job_prepid.txt' because it does not exist.

...
$pre=Get-Content "C:\Users\User\AppData\Local\Temp\r4r5_job_prepid.tx ...
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CategoryInfo : ObjectNotFound: (C:\Users\User\A..._job_prepid.txt:String) [Get-Content], ItemNotFoundException
Alt+V:details

Let me redo the test with clean python files.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: PRE-spawn child pid=10896 alive_before_close=False

POST-spawn child pid=33396 alive_before_close=True

sleep-kids before close: 27140(pp=10896), 47852(pp=33396)

PRE child alive_AFTER_job_close=False

POST child alive_AFTER_job_close=False

Alt+V:details

Let me re-measure capturing the actual sleep-child PIDs (the informative case), killing them after verify.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: preKid=52008 aliveBefore=True

postKid=35712 aliveBefore=True

preKid (child spawned BEFORE parent joined job) alive_AFTER_close=False

postKid (child spawned AFTER parent joined job) alive_AFTER_close=False

time: 2s

Both pre- and post-spawned descendants were killed by the Job Object close on this host — empirical mechanical evidence for the no-orphan guarantee (I'll note it in the report). Let me clean up test artifacts and run the cheap gate-first suites (PS 5.1 parse + Python compile).

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: === PS 5.1 parse of all bundle .ps1 ===

[ref] cannot be applied to a variable that does not exist.

At line:1 char:1
$null=[System.Management.Automation.Language.Parser]::ParseFile('C:\U ...
Alt+V:details

The parse one-liner never actually ran (uninitialized $e). Let me redo it properly with a real parse script.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: ...

PARSE_FAIL_TOTAL=0

PS51 parse exit=0

Only one file was bound. Let me make the parse script enumerate directories internally.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: PARSE_OK group_a.ps1

PARSE_OK group_b.ps1

PARSE_OK group_c.ps1

PARSE_OK group_d.ps1

PARSE_OK run_argv_r4r3.ps1

Alt+V:details

19/19 files parse OK under PS 5.1. Now let me run the harness suites with raw-evidence capture. Starting with the quick suites (argv, monitor-missing, group_a, group_c):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: argv exit=0

ARGV count=8

expected=8 count_ok=True

ARGV received_count=8

ARGV MATCH=True

Alt+V:details

argv 8/8 PASS. Now monitor-missing, group_a, and group_c:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: === monitor_missing exit=0 ===

MONMISS operator_exit=1

MONMISS rejected_monitor_path=True

MONMISS network_invoked=False

MONMISS runner_launched=False

Alt+V:details

monitor-missing PASS (fails before network). Now group_a (17 cases):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: 0

0

1

1

1

Alt+V:details

Group A 17/17 PASS. Now group_c (18 cases):

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: GROUP_C_RESULTS pass=18 total=18 fail=0

c_alive_nofail | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE

c_alive_docfail | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE

c_alive_final | pass=True | class=DEADLINE proc=ALIVE expectProc=ALIVE

c_dead_nomark | pass=True | class=PROCESS_ENDED proc=DEAD expectProc=DEAD

Alt+V:details

Group C+identity 18/18 PASS. Now the critical group_d (38 cases: 34 + 4 temporal negatives). This validates the temporal binding and operator.log seal member changes. Running with a long timeout:

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
     D_RAW_E
VIDENCE_CLOSURE_V1"; powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_groupd_r4r3.ps1" 2>&1 | Tee-Object -File

Path "$ws\evidence\offline\run_groupd.out.log"; Write-Output "groupd exit=$LASTEXITCODE"

output: Failed to execute tool: GROUP_D_RESULTS pass=33 total=38 fail=5

d_pos | pass=False | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=True

d_r3_false_pos | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_recompute_mismatch | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_e2e_count_mismatch | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_ctx_sha_missing | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_status_sha_missing | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_status_not_started | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_identity_mismatch | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_exit1 | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_exit7 | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_exit_null | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_exit_str | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

8 lines omitted; Alt+V:output

d_stopped_no_final | pass=True | exit=1 | disp=EARLY_FAILURE_EVIDENCE | prod=False bind=False pkg=False

15 lines omitted; Alt+V:output

tp_swapped | pass=False | exit=1 | disp= | prod= bind= pkg=

tp_malformed | pass=False | exit=1 | disp= | prod= bind= pkg=

groupd exit=1

Command exited with code 1

Two problems: d_pos now fails (PRODUCTFAIL), and the tp* temporal negatives produced no disposition (group_d crashed early). Let me inspect the per-case logs.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: ===== gd_d_pos.log (tail) =====

PRODUCT_DISPOSITION=PRODUCT_FAIL

PRODUCT_PASS=False

BINDING_PASS=False

PACKAGING_PASS=True

Alt+V:details

Two issues to diagnose. Let me inspect the current dpos preflight/config/manifest and the tp* fixture existence.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: == tp_ fixture dirs ==

tp_after_run

tp_future_preflight

tp_malformed

tp_swapped

Alt+V:details

Found the bug: in make_temporal, the copied context.json still points at the d_pos paths, so each tp_* fixture mutated d_pos's preflight — the last one (tp_malformed) left d_pos corrupted. Let me rewrite the fixer to retarget the copied fixture's internal paths and restore d_pos.

tool done · Updated

Updated · +81 -104

--- a/

+++ b/

@@ -1,16 +1,16 @@

1 1 #!/usr/bin/env python

2 2 # -- coding: utf-8 --

3 3 - """R4_R5 fixture fixer: retarget R4_R4 absolute paths -> R4_R5, fix the d_pos

4 3 - temporal ordering + quiescence SHA bindings + secret-free operator.log, ensure

5 3 - every gd fixture has operator.log, and create the temporal-negative fixtures."""

6 3 + """R4_R5 fixture fixer (v2): retarget R4_R4 -> R4_R5, restore d_pos to a valid

6 4 + strict-temporal positive + consistent quiescence bindings + secret-free

6 5 + operator.log, and create the temporal-negative fixtures with FULLY retargeted

6 6 + internal paths (never pointing back at d_pos)."""

6 7 import json, os, shutil, hashlib, glob

7 8

+253 diff lines · Alt+V:change

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: d_pos preflight sha 3d316bc9d0720a22bfc734d68164c54b4bbca1f1d94068883fb3994c059090c7 size 248

MADE temporal-negative tp_future_preflight

MADE temporal-negative tp_after_run

MADE temporal-negative tp_swapped

MADE temporal-negative tp_malformed

Alt+V:details

dpos restored and tp* fixtures now self-consistent. Re-running group_d:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: GROUP_D_RESULTS pass=38 total=38 fail=0

d_pos | pass=True | exit=0 | disp=PRODUCT_PASS | prod=True bind=True pkg=True

d_r3_false_pos | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_recompute_mismatch | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

d_e2e_count_mismatch | pass=True | exit=1 | disp=PRODUCT_FAIL | prod=False bind=False pkg=False

Alt+V:details

Group D 38/38 PASS — including d_pos genuine PRODUCT_PASS and all 4 temporal negatives. Let me confirm d_pos's temporal/member binding detail from its log, then run the tree + deadline suites.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: == d_pos fail_fields ==

BINDING_PASS=True

...

FAIL_FIELDS=

== d_pos evidence zip contents (should include operator/operator.log) ==

Alt+V:details

d_pos: FAIL_FIELDS empty, 110-member zip includes operator/operator.log. Genuine PRODUCT_PASS confirmed. Now run the group-tree suite (real 3-layer, all 4 modes):

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
     D_RAW_E
VIDENCE_CLOSURE_V1"; powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_gb_tree_r4r4.ps1" 2>&1 | Tee-Object -Fil

ePath "$ws\evidence\offline\run_group_tree.out.log"; Write-Output "group_tree exit=$LASTEXITCODE"

output: Failed to execute tool: GROUP_TREE_RESULTS pass=2 total=4 fail=2

...

...

...

...

TESTROOT=C:\Users\User\AppData\Local\Temp\R4R4_TREE_c9da242b148647f5ab77b370971738e2

group_tree exit=1

Command exited with code 1

请继续完成相关任务

Group tree: normal and waitfail pass, but cimfail/killfail leave processes alive (all_gone=False) — the Job Object termination isn't killing the tree. Let me inspect the job functions in group_b.ps1.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
The Job Object isn't covering the pre-spawned tree in the harness (its children spawn before the runner is assigned). The clean fix: assign the tree to the containment job as it spawns. Let me update hooks_b_tree.ps1 to assign each spawned layer into the already-allocated job.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\accept\dev\hooks_b_tree.ps1
tool done · Updated

Updated · +6 -0

--- a/

+++ b/

@@ -47,6 +47,12 @@

47 47 $pi.RedirectStandardError = $true

48 48 $pi.CreateNoWindow = $true

49 49 $proc = [System.Diagnostics.Process]::Start($pi)

50 50 + # R4_R5-02: assign this freshly-spawned layer into the containment Job Object

50 51 + # group_b already allocated (New-OperatorJob runs BEFORE Start-RunnerProcess).

50 52 + # Every descendant it spawns thereafter inherits job membership, so the job's

50 53 + # KILL_ON_JOB_CLOSE / TerminateJobObject mechanically covers the WHOLE tree

50 54 + # even when the CIM/kill/wait boundary leaves are injected to fail.

50 55 + if ($script:REAL_ADD_RUNNER) { [void](& $script:REAL_ADD_RUNNER -Process $proc) }

50 56 return $proc

51 57 }

+1 diff lines · Alt+V:change

Now add the real-function capture at the top and the harness overrides at the bottom (including fixing the killfail signature to accept -CreationUtc):

tool done · Updated

Updated · +13 -1

--- a/

+++ b/

@@ -11,6 +11,9 @@

11 11 $script:CAPTURE = $env:TREE_CAPTURE

12 12 $script:RUNCOUNT = $env:TREE_RUNCOUNT

13 13 $script:RUNNERPY = $env:TREE_RUNNER

14 14 + # capture the REAL group_b job-assignment boundary so New-TreeProcess can put the

14 15 + # whole tree into the already-allocated containment job (see below).

14 16 + $script:REAL_ADD_RUNNER = ${function:Add-RunnerToJob}

14 17

15 18 function Invoke-QuiescenceCapture {

16 19 param([string]$MetricsUrl, [string]$PreflightPath, [string]$RepoScripts)

@@ -120,7 +123,7 @@

120 123 }

+20 diff lines · Alt+V:change

Now re-parse hooks_b_tree, check for leftover orphan tree processes from the failed run, kill them, then re-run the tree suite.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: hooks_b_tree errors=0

stray python count before cleanup: 0

time: 1s

No strays (cleanup worked, but verification caught the containment gap — exactly what the test should detect). Now re-run the tree suite with the job-assignment fix:

run issue · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

command: $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
     D_RAW_E
VIDENCE_CLOSURE_V1"; powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_gb_tree_r4r4.ps1" 2>&1 | Tee-Object -Fil

ePath "$ws\evidence\offline\run_group_tree.out.log"; Write-Output "group_tree exit=$LASTEXITCODE"

output: Failed to execute tool: GROUP_TREE_RESULTS pass=3 total=4 fail=1

...

...

...

...

TESTROOT=C:\Users\User\AppData\Local\Temp\R4R4_TREE_b9077dd1eadb4b999a9c851694714e40

group_tree exit=1

Command exited with code 1

killfail now passes (explicit TerminateJobObject works), but cimfail still fails because it relies on CloseHandle-triggered KILL_ON_JOB_CLOSE, which is non-deterministic. The robust fix: the finally block must explicitly Invoke-TerminateJobTree before closing. Let me update group_b's finally.

read done · Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RU...

done: Reading C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AN
  D_RAW_EVIDENCE_CLOSURE_V1\build\bundle\group_b.ps1
tool done · Updated

Updated · +7 -4

--- a/

+++ b/

@@ -891,10 +891,13 @@

891 891 Write-Host ('FAIL_CLOSED OPERATOR_LOG_ERROR=' + $_.Exception.Message)

892 892 }

893 893 Invoke-AtomicWriteJson -Path $statusPath -Payload $st -AllowReplace $false | Out-Null

894 894 - # R4_R5-02/-03: closing the job handle with KILL_ON_JOB_CLOSE terminates any

895 894 - # survivor in the job - the final mechanical no-orphan guarantee. A live

896 894 - # runner can remain only when termination could not be confirmed, in which

897 894 - # case supervision_state above is MANUAL_INTERVENTION_REQUIRED_RUNNER_MAY_BE_ACTIVE.

898 894 + # R4_R5-02/-03: the final mechanical no-orphan guarantee. Explicitly

898 895 + # TerminateJobObject FIRST (deterministic, kills every member incl. any

898 896 + # descendant that inherited job membership), then close the handle so

898 897 + # KILL_ON_JOB_CLOSE also fires as a belt-and-suspenders. A live runner can

+6 diff lines · Alt+V:change

Re-mirror group_b to accept/dev, re-parse, and re-run the tree suite:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: group_b parse errors=0

GROUP_TREE_RESULTS pass=4 total=4 fail=0

...

...

...

Alt+V:details

Group tree 4/4 PASS with real 3-layer trees, all_gone and runcount=1 across all modes. Now re-run the deadline and monitor suites against the updated group_b:

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: === deadline exit=0 ===

GBD operator_exit=0

GBD failure_stage=runner-deadline

GBD exit_code=1

GBD runner_started=True

Alt+V:details

All suites pass. Let me re-run the full PS 5.1 parse + python compile once more (group_b changed), confirm no stray processes, and update the todo list.

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: PARSE_OK group_a.ps1

PARSE_OK group_b.ps1

PARSE_OK group_c.ps1

PARSE_OK group_d.ps1

PARSE_OK run_argv_r4r3.ps1

Alt+V:details

All 19 PS files parse OK, Python compiles, no stray processes. Let me update the todo list and build the offline_test_results.json (fix 7).

tool done · 4/7 · 57%

checklist: todo_write

☑ Verify group_b.ps1 edits are complete & correct (logPath, Resolve-ProcessIdentityState, containment, finally)

☑ Run fixture-fixer (retarget paths, d_pos temporal+sha+log, temporal negatives)

☑ Wire harness drivers (repoint base dirs to R4_R5, add temporal negatives to Group D, tree sleep 300s)

☑ Run all suites (A 17/17, C+identity 18/18, D 38/38, argv 8/8, group-tree 4/4, deadline, monitor-missing, PS parse 19/19, py compile)

Alt+V:details

Now I'll capture all suites fresh with honest per-command timestamps and raw logs into a clean evidence directory via a unified runner.

tool done · Created

Created · +46 -0

--- a/

+++ b/

@@ -0,0 +1,46 @@

0 1 + $ErrorActionPreference = 'Stop'

0 2 + $ws =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1'
0 3 + $outRoot = Join-Path $ws 'evidence\offline_r4r5'

0 4 + if (Test-Path -LiteralPath $outRoot) { Remove-Item -LiteralPath $outRoot -Recurse -Force }

0 5 + New-Item -ItemType Directory -Force -Path $outRoot | Out-Null

0 6 +

0 7 + $specs = @(

0 8 + @{ name='argv'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_argv_r4r3.ps1"" },

0 9 + @{ name='monitor_missing'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File

+43 diff lines · Alt+V:change

run done · $ws="C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_...

output: CAPTURED argv exit=1 started=2026-09-08T09:52:32.237Z

CAPTURED monitor_missing exit=1 started=2026-09-08T09:52:32.287Z

CAPTURED group_a exit=1 started=2026-09-08T09:52:32.308Z

CAPTURED group_c exit=1 started=2026-09-08T09:52:32.329Z

CAPTURED group_d exit=1 started=2026-09-08T09:52:32.350Z

Alt+V:details

The cmd.exe wrapper broke quoting (everything failed instantly). Let me rewrite capture_all to invoke each executable directly with proper .NET process redirection.

tool done · Updated

Updated · +38 -34

--- a/

+++ b/

@@ -1,46 +1,50 @@

1 1 $ErrorActionPreference = 'Stop'

2 2 - $ws =
        'C:\Users\User\AppData\Local\Temp\A_QUANT_CN_08B_04R_REAL99_RUN2_R8_04_R4_R5_DEEPSEEK_FLASH_PROCESS_IDENTITY_TEMPORAL_BINDING_AND_R

        AW_EVIDENCE_CLOSURE_V1'
3 2 - $outRoot = Join-Path $ws 'evidence\offline_r4r5'

4 2 - if (Test-Path -LiteralPath $outRoot) { Remove-Item -LiteralPath $outRoot -Recurse -Force }

5 2 - New-Item -ItemType Directory -Force -Path $outRoot | Out-Null

6 2

7 3 - $specs = @(

8 3 - @{ name='argv'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File "$ws\accept\tests\run_argv_r4r3.ps1"" },

9 3 - @{ name='monitor_missing'; cmd="powershell.exe -NoProfile -ExecutionPolicy Bypass -File

+86 diff lines · Alt+V:change

run running (603s) · Ctrl+B → /job

Thank you so much for this full report - this is so helpful. I've had similar issues in the past and tried some workarounds but they clearly aren't working. I'm going to see what the root cause is and get this fixed asap.

0 replies

Navigation Menu

Long-running agent turn stops before executing its explicitly stated next tool action and requires manual “continue” #6010

Uh oh!

{{title}}

Uh oh!

Replies: 1 comment

Uh oh!

{{title}}

Uh oh!

Shared A3-compliant process runner. Never uses $Args as a parameter name,

never uses `cmd.exe /c`, never unprescrit... never `($ArgList -join ' ')` on

raw args, never synchronous sequential ReadToEnd. Each argv is quoted with

ConvertTo-WindowsArg; stdout/stderr are read asynchronously; WaitForExit has

hooks_d.ps1 - R4 Group D test hooks (offline process-state stubs; never in

production). Dot-sourced after the Group D function definitions override the

leaf boundaries so the COMPLETE Invoke-GroupD path runs offline.

R4_R4 process-tree offline test hooks (never used in production).

Dot-sourced AFTER the Group B function definitions, so it can both override

the boundary leaves and reuse the in-scope ConvertTo-Argtring helper.

Mode is selected by $env:TREE_MODE:

R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

Select a reply

Uh oh!

Long-running agent turn stops before executing its explicitly stated next tool action and requires manual “continue” #6010

Uh oh!

hxfhd Sep 8, 2026

Shared A3-compliant process runner. Never uses $Args as a parameter name,

never uses cmd.exe /c, never unprescrit... never ($ArgList -join ' ') on

raw args, never synchronous sequential ReadToEnd. Each argv is quoted with

ConvertTo-WindowsArg; stdout/stderr are read asynchronously; WaitForExit has

hooks_d.ps1 - R4 Group D test hooks (offline process-state stubs; never in

production). Dot-sourced after the Group D function definitions override the

leaf boundaries so the COMPLETE Invoke-GroupD path runs offline.

R4_R4 process-tree offline test hooks (never used in production).

Dot-sourced AFTER the Group B function definitions, so it can both override

the boundary leaves and reuse the in-scope ConvertTo-Argtring helper.

Mode is selected by $env:TREE_MODE:

R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

Replies: 1 comment

Uh oh!

Hmbown Sep 8, 2026 Maintainer

Shared A3-compliant process runner. Never uses $Args as a parameter name,

never uses cmd.exe /c, never unprescrit... never ($ArgList -join ' ') on

raw args, never synchronous sequential ReadToEnd. Each argv is quoted with

ConvertTo-WindowsArg; stdout/stderr are read asynchronously; WaitForExit has

hooks_d.ps1 - R4 Group D test hooks (offline process-state stubs; never in

production). Dot-sourced after the Group D function definitions override the

leaf boundaries so the COMPLETE Invoke-GroupD path runs offline.

R4_R4 process-tree offline test hooks (never used in production).

Dot-sourced AFTER the Group B function definitions, so it can both override

the boundary leaves and reuse the in-scope ConvertTo-Argtring helper.

Mode is selected by $env:TREE_MODE:

R4_R2-01 deadline-injection test against the R4_R3 bundle group_b.ps1.

hxfhd
Sep 8, 2026

never uses `cmd.exe /c`, never unprescrit... never `($ArgList -join ' ')` on

Hmbown
Sep 8, 2026
Maintainer

never uses `cmd.exe /c`, never unprescrit... never `($ArgList -join ' ')` on