Skip to content

Printing Parts

IceChes edited this page Apr 23, 2023 · 4 revisions

Filaments

Everything should ideally be printed in ABS, although PETG will work for most parts. PETG is not recommended for the left and right top constraints. PLA will not work for any parts EXCEPT for the electronics enclosure parts.

I used Polymaker PolyLite white ABS for my build.

Feel no obligation to follow the colors of the STEP files. They are for aesthetic and differentiating between versions.

Settings

I used 50% gyroid infill and 4 walls, tops, and bottoms for most parts. However, I printed the 2040 brackets and Y idlers solid.

Table

Part Quantity Optional?
2040 Corner Bracket 4 No
2040 Plate 4 Yes
BLTouch Holder 1 No
Blower 1 No
Extruder Mount 1 No
Foot 4 No
IEC Socket Plate 1 No
Linear Rod Mount 4 No
Main Electronics Plate 1 No
Mainboard Electronics Plate 1 No
PSU Mount - Long 2 No
PSU Mount - Short 2 No
Top Constraint - Left Bracket 1 No
Top Constraint - Left Tensioner 1 No
Top Constraint - Left 1 No
Top Constraint - Right Bracket 1 No
Top Constraint - Right Tensioner 1 No
Top Constraint - Right 1 No
X - Left Side Module 1 No
X - Right Side Module 1 No
X Axis Tensioner 1 No
Y Idler - Left 1 No
Y Idler - Right 1 No
Y Idler Tensioner 1 No
Y Motor Mount - Left 1 No
Y Motor Mount - Right 1 No
Z Bracket 2 No
Z Module - Left 1 No
Z Module - Right 1 No

Clone this wiki locally