Skip to content

Supported Mods

IceChes edited this page Mar 30, 2023 · 3 revisions

Improved X Tensioner by RazorSh4rk

Snap-on lid for the X tensioner part that allows you to fix the screw at 2 points instead of the original 1. Needs an M5x35mm screw at least. Needs no additional hardware other than that, its just held in place by friction and the screw holding the bearing.

Note from Ice: You can probably acetone weld or superglue the tensioner on if the snap fit isn't enough.

Clone this wiki locally