Using chan_quectel generator

[dckmedia]

I have used the repo quectel generator to generate ipk file for EC25A. I have used the same below source url.

PKG_SOURCE_URL:=https://github.com/IchthysMaranatha/asterisk-chan-quectel/archive/refs/heads/

But, what it generates has incoming call issues. The error I'm getting is below.:

[Sep 24 00:43:26] WARNING[18164][C-00000001]: channel.c:1286 channel_indicate: [Quectel/quectel0-0100000000] Don't know how to indicate condition 22 == Spawn extension (incoming-mobile, +61XXXXXXXXX, 2) exited non-zero on 'Quectel/quectel0-0100000000'

Am i using the most up to date package source url.?

[IchthysMaranatha]

What system are you building for? Is your modem working properly with incoming and outgoing calls without chan_quectel using at commands?

Please go through these
#4
#13

[dckmedia]

Thank you for the quick response. please find the below details.

Openwrt version :- OpenWrt 23.05.3 r23809-234f1a2efa / ramips/mt76x8
Router board:- WL281 MT7628
Modem:- Quectel EC25-AU

ATI
Quectel
EC25
Revision: EC25AUFAR06A13M4G
OK

root@OpenWrt:~# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux 5.15.150 ohci_hcd Generic Platform OHCI controller
Bus 001 Device 002: ID 2c7c:0125 Quectel EC25-AU
Bus 001 Device 001: ID 1d6b:0002 Linux 5.15.150 ehci_hcd EHCI Host Controller

root@OpenWrt:~# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default
Default Audio Device
sysdefault
Default Audio Device
default:CARD=EC25AU
EC25-AU, USB Audio
Default Audio Device
sysdefault:CARD=EC25AU
EC25-AU, USB Audio
Default Audio Device
front:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
Front output / input
surround21:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=EC25AU,DEV=0
EC25-AU, USB Audio
IEC958 (S/PDIF) Digital Audio Output

Modem works with incoming and outgoing calls when i use the chan_quectel.so in this release. Issue only happens when i use the generator and use generated ipk.

[IchthysMaranatha]

If it already works with the 3.5 binary, it's just a question of getting the asterisk version + openwrt version working with the generator. What inputs are you presently providing?

[dckmedia]

Thanks, it is Asterisk version 20 and the SDK is https://downloads.openwrt.org/releases/23.05.3/targets/ramips/mt76x8/openwrt-sdk-23.05.3-ramips-mt76x8_gcc-12.3.0_musl.Linux-x86_64.tar.xz.

[IchthysMaranatha]

That does seem right for your board but I think the 3.5 binary that works for you was generated for #45 so I used Asterisk 18 and openwrt 22 for that.

Please try with those inputs and if that doesn't work, use the 3.5 head with correct filename in the makefile to generate the ipk. You are only replacing the so file and restarting, right? If using winscp to transfer to router, please make sure that transfer mode is binary

[dckmedia]

I'm using the ipk file generated by chan quectel generator. 3.5 head with correct filename in the makefile to generate the ipk did the trick. Thanks for your help.