Home EN

Welcome to the SimpleSensorSync Multi-Sensor Time Synchronization Solution!

To avoid usage issues, we strongly recommend configuring and using in the following order!

1. Flash the latest firmware
2. Configure parameters as needed
3. Start the SDK
4. Connect sensor hardware
5. Verify sensor device synchronization (LiDAR, Camera, IMU)
6. Repeat steps 4 and 5 until all sensors meet synchronization requirements
7. Run different versions of the SDK
8. Record ROS data packets and check if timestamp information meets requirements

📁 Core Features

🚀 Firmware Flashing & Configuration

• Firmware flashing (Win/Mac/Linux all platforms)
• JSON parameter configuration guide
• First-time startup verification process

🔌 Sensor Wiring Guide

• MVS User Guide
• Reverse polarity protection circuit
• Multi-sensor connection solutions

⚙️ SDK Operation & Synchronization

• C++ SDK Examples
• Multi-sensor synchronization effect verification
• Various usage demo examples
• Log Usage Guide

🧩 Hardware System Architecture

• Processor configuration performance
• Built-in IMU performance
• Power tree design
• Interface definition table

🛠️ System Analysis

• High-precision time synchronization mechanism
• PPS+PPS synchronization protocol
• JSON feedback data protocol

Python

• Script synchronization mechanism
• Visualization interface

---

📝 中文页面 (Chinese Page)