Verifying that the RAK3401 1W changes are working?

[michaelh99]

What's the best way to test 17.1.14 changes to verify that I'm getting the xmit boost I would expect on a RAKwireless Wismesh Repeater Mini (high power) which has a RAK3401 + RAK13302 boost module.

Should those changes work with this hardware?

I consistently see 12dB snr out and back when I ping the repeater no matter what firmware I have installed. Output power is set to 22dB as I have been told the boost board will automatically add 8dB assuming it's configured properly.

I've got 17.1.6 installed.

[IoTThinks]

I will check using my SDR USB this week.
I may miss the events in Github at Github does not notify me.

I find RAK3401 battery variant uses only 150mA at 4.0 and RAK 3401-5v variant uses only 250 mA at 5.0v.
The mA is too low for 1W TX.

T096 can use up to 450mA during TX.

You may join and ask here if no reply from us for a day.
https://discord.gg/TRDzX2hQp