RF Educational tool from here https://github.com/cifertech/RF-Clown I made some chnage to enable the sketch to compile with ver 1.8.19 of the Arduino IDE.
PCB Gerbers are also complete now and ready for your PCB Manaufature of choice.
Please see the orginal project as this repositry is just to resolve the issues i had when trying to get the project working.
Instead of using a raw OLED display do not fit all the components under the OLED and use a OLED Module. I glued four plastic stand off to the PCB and attached the OLED with screws to the stand offs. OLED Module is connected to the PCB with 4 short wires under the module.
The Neopixel led was not used. So i made a few small changes that use the Neopixel When moving left or right in the menu the Neopixel will briefly flash a differnt color for the different radio types. When a radio type is enabled the Neopixel will flash about once per second in the color of that radio type.
WiFi_MODULE Red
VIDEO_TX_MODULE Green
RC_MODULE Blue
BLE_MODULE Yellow
Bluetooth_MODULE Purple
USB_WIRELESS_MODULE Cyan
ZIGBEE_MODULE White
Regards Jman