ESP32-C6 Slave, current limit for a Slave with its own supply, version 0.3.006 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Wiring for 12 V and 24 V strips; power the ESP32 from the supply New diagram and section with a step-down converter for the ESP32 and the level shifter. The 5 V diagram shows the ESP32 powered from the supply's 5 V as an alternative to USB. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Wiring diagram with the 74AHCT125 level shifter The diagram shows the level shifter between GPIO 4 and the 330 ohm resistor, with its supply and OE pin, and says that it is optional. The wiring pages list its pins and say that the resistor belongs close to the first LED. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Name the file system file of release 0.3.003 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Release file names of 0.3.002 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Wider light-page screenshots, full list of LED types The light page was shot at a width where the header buttons of the Segments card overflowed; it is now shot wider. The picture of the phone no longer sits in a table that clipped the other one. What-You-Need lists every LED type of the drop-down list with its status. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Version 0.3.001; Slaves need 0.3.001 for plugins with many settings Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Add the HyperLED wiki (English and German) with screenshots Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>