Impossibility to get new radar Tuya _TZE204_kyhbrfyl work with Zigbee2MQTT

[CedricAndry]

Hello,

I tried the 'Support new device' procedure for this new device, but unfortunatly nothig is exposed after linking it with my Zigbee2MQTT coordinator.

Just after pairing I received this error message in pop-up :

debug 2024-01-05 18:17:39Received Zigbee message from 'Radar présence', type 'commandDataReport', cluster 'manuSpecificTuya', data '{"dpValues":[{"data":{"data":[0,0,0,56],"type":"Buffer"},"datatype":2,"dp":19}],"seq":1792}' from endpoint 1 with groupID 0

info 2024-01-05 18:17:39MQTT publish: topic 'zigbee2mqtt/Radar présence', payload '{"device":{"applicationVersion":74,"dateCode":"","friendlyName":"Radar présence","hardwareVersion":1,"ieeeAddr":"0xa4c138e376f5beaa","manufacturerID":4417,"manufacturerName":"_TZE204_kyhbrfyl","model":"unknown","networkAddress":52790,"powerSource":"Mains (single phase)","stackVersion":0,"type":"Router","zclVersion":3},"last_seen":"2024-01-05T17:17:39.871Z","linkquality":76}'

Here is how the device appear in the interface :

The json from the 'State' folder :

{
    "device": {
        "applicationVersion": 74,
        "dateCode": "",
        "friendlyName": "Radar présence",
        "hardwareVersion": 1,
        "ieeeAddr": "0xa4c138e376f5beaa",
        "manufacturerID": 4417,
        "manufacturerName": "_TZE204_kyhbrfyl",
        "model": "unknown",
        "networkAddress": 52790,
        "powerSource": "Mains (single phase)",
        "stackVersion": 0,
        "type": "Router",
        "zclVersion": 3
    },
    "last_seen": "2024-01-05T16:45:13.831Z",
    "linkquality": 78
}

The graph :

When I connect to my device in Tuya account, here is what I found:

Standard instruction set

<html><body>
<!--StartFragment-->
Code | Type | Values
-- | -- | --
presence_time | Integer | {   "unit": "s",   "min": 3,   "max": 600,   "scale": 0,   "step": 1 }
motion_far_detection | Integer | {   "unit": "cm",   "min": 150,   "max": 600,   "scale": 0,   "step": 75 }
motion_sensitivity_value | Integer | {   "unit": "",   "min": 0,   "max": 7,   "scale": 0,   "step": 1 }
motionless_sensitivity | Integer | {   "unit": "",   "min": 0,   "max": 7,   "scale": 0,   "step": 1 }

<!--EndFragment-->
</body>
</html>

Standard status set:

<html><body>
<!--StartFragment-->
Code | Type | Values
-- | -- | --
presence_state | Enum | {   "range": [     "none",     "presence"   ] }
human_motion_state | Enum | {   "range": [     "none",     "small_move",     "large_move"   ] }
presence_time | Integer | {   "unit": "s",   "min": 3,   "max": 600,   "scale": 0,   "step": 1 }
motion_far_detection | Integer | {   "unit": "cm",   "min": 150,   "max": 600,   "scale": 0,   "step": 75 }
motion_sensitivity_value | Integer | {   "unit": "",   "min": 0,   "max": 7,   "scale": 0,   "step": 1 }
motionless_sensitivity | Integer | {   "unit": "",   "min": 0,   "max": 7,   "scale": 0,   "step": 1 }
dis_current | Integer | {   "unit": "cm",   "min": 0,   "max": 1000,   "scale": 0,   "step": 1 }

<!--EndFragment-->
</body>
</html>

I have no idea how to get further with this device...

Note that I succeed in pairing it and using it with my Tuya/Zigbee bridge + SmartLife application & Jeedom/Wifilightv2 plug-in.

Any idea how I can go further?