2.14.2

[Koenkk]

Feel free to discuss the 2.14.2 release here!

[GigiPompieru]

PSA: Fix your TRVZB automations (and probably TRVZBT as well).

Koenkk/zigbee-herdsman-converters#13268 changed the way the TRV has its external sensor configured to new values. This breaks any automations that had them as triggers as well as those who interact with them.

In my case, I had a trigger if a TRV was external_3, meaning the external temp didn't update - this is gone and replaced with remote_source_offline.
Then I configured the TRV back to external_1 and forced an update with the external temp sensor value - this action no longer works since external_1 is replaced with remote_temperature.

This is not a big deal but not all users read the release notes and might have to find about broken automations the hard way, so I'm mentioning here to bring it forward.

Thanks for the release!

[luar123]

Another note:

Important

Due to a potentially crippling naming conflict, this release introduces a breaking change for devices relying on automatically generated definitions (e.g. ESPHome) that use any of the following clusters: Analog Input (0x000c), Analog Output (0x000d), Binary Input (0x000f), Binary Output (0x0010).

The name property of the exposed feature created by the generated definition is now using pre-defined patterns. It is based on application type for the Analog ones. It uses binary_input and binary_output respectively for the Binary ones. _<endpoint_id> is appended to each name for multi-endpoint devices.
If you rely on this property in your setup, you will have to make the appropriate changes.

NOTE: If you have an external converter for your custom device, it is not affected.