Menu setup led

[andpet1324]

Added an option for setting the LED l1a calibration pulse manually under expert/fast_control

[cmantill]

@andpet1324 this looks promising. Can you paste the output here? E.g. from the menu and the analysis script? Has this been tested at Lund?

[andpet1324]

@andpet1324 this looks promising. Can you paste the output here? E.g. from the menu and the analysis script? Has this been tested at Lund?

I realized that I had accidentally pushed the content of this branch to this branch. Now this branch only includes the addition of manually setting the L1A calibration for LED charge injections in the menu. In the cross-talk branch, I use this trigger to do external charge injections which have shown good results that I will post here: .

Below is the output for changing the LED L1A calibration in the menu.

BIAS Read and write bias voltages
DAQ Data AcQuisition configuration and testing
EXPERT expert functions
LOG Configure logging levels
ROC Read-Out Chip Configuration
TASKS tasks for studying the chip and tuning its parameters
EXIT leave this menu
HELP print help for this menu

EXPERT

I2C raw I2C interactions
ELINKS manage the elinks
FAST_CONTROL configuration and testing of fast control
EXIT leave this menu
HELP print help for this menu

FAST_CONTROL

STATUS Check status and counters
SW_L1A Send a software L1A
LINK_RESET Send a link reset
BUFFER_CLEAR Send a buffer clear
RUN_CLEAR Send a run clear
COUNTER_RESET Reset counters
CALIB Setup calibration pulse
LED Setup LED calibration pulse
EXIT leave this menu
HELP print help for this menu

LED
Calibration L1A offset for LED? [18] 16
exit

I2C raw I2C interactions
ELINKS manage the elinks
FAST_CONTROL configuration and testing of fast control
EXIT leave this menu
HELP print help for this menu

FAST_CONTROL

STATUS Check status and counters
SW_L1A Send a software L1A
LINK_RESET Send a link reset
BUFFER_CLEAR Send a buffer clear
RUN_CLEAR Send a run clear
COUNTER_RESET Reset counters
CALIB Setup calibration pulse
LED Setup LED calibration pulse
EXIT leave this menu
HELP print help for this menu

LED
Calibration L1A offset for LED? [16] 18

[tomeichlersmith]

apologies for the delay 🫡 this looks good and is orthogonal from other stuff so I'm going ahead and merging it (after the tests pass)