Add support for csd pinone [mini]

[gitfool]

I have the csd pinone mini and can help test, in general, on macos and windows.

References:

• https://pinball-docs.clevelandsoftwaredesign.com/docs/PinOne
• https://pinball-docs.clevelandsoftwaredesign.com/docs/PinOne/Configuring
• https://github.com/philipellisis/arduino-virtual-pinball-board

[Le-Syl21]

Hey @gitfool, thanks for the issue — we're definitely interested in adding PinOne support! 🎯

We did some research on the PinOne hardware and we see it's based on an Arduino Micro (ATmega32U4). The VID/PID (0x2341:0x8037) is generic Arduino, so we can't auto-detect based on that alone. However, the SDL joystick name might be unique enough for detection — that's what we need to verify.

Could you share a device dump so we can see exactly how the PinOne identifies itself to the OS?

Linux:

jstest --list    # or jstest /dev/input/js0
# also useful:
cat /proc/bus/input/devices | grep -A 5 "Vendor=2341"
sdl2-jstest --list

Windows:

• joy.cpl (Start → "Set up USB game controllers") — screenshot of the device name
• Or Gamepad Tester in a browser — screenshot showing device name + button count

macOS:

• System Information → USB → find the device name
• Or Gamepad Tester in a browser — screenshot showing device name + button count

What we need to know:

1. The exact device name as reported by the OS / SDL (this is how we detect Pinscape via "PSC" and DudesCab via "DudesCab" in the name)
2. Number of buttons and axes reported
3. Your current button mapping — which physical button = which function (Start, Flipper L/R, Launch, etc.)

With this info we can build a proper PinOne profile for the wizard. Thanks!

[Le-Syl21]

@gitfool Good news — we managed to find all the data we needed from the CSD documentation and VPX calibration screenshots!

What we found:

• Device identifies as "Clev Soft PinOne" (VID 0x0E8F, PID 0x0792)
• Full button mapping from the official VPX calibration page (18 buttons mapped)
• Accelerometer sends Position data (firmware-integrated), not raw Acceleration like Pinscape
• Plunger on Z axis, Nudge on X/Y axes

What we shipped in v0.5.6:

• Auto-detection via SDL joystick name containing "PinOne"
• Default button profile applied automatically when a PinOne is detected
• Correct sensor mappings (nudge as Position type, plunger as Position)
• Profile selectable in the wizard alongside KL25Z, Pico, and DudesCab

Commit: da2e5a9

We'd love your feedback! Since we don't have a PinOne to test with, it would be great if you could:

1. Confirm the device name SDL reports on your system (does it contain "PinOne"?)
2. Try the v0.5.6 build and see if detection + button mapping works as expected
3. Let us know if any button assignments need adjusting

Looking forward to your validation 🎯

[Le-Syl21]

Hi @gitfool — FYI, CSD PinOne support has been implemented: there's a dedicated PinOne profile in the wizard (detected by name / ID prefix CSD) and a recent fix (640f038) properly treats the nudge axes as Acceleration instead of Position. Asked for your hands-on validation over in #5 — happy to close this issue once you've confirmed it works on your PinOne mini.