[pull] master from torvalds:master#1080
Merged
pull[bot] merged 24 commits intoLoongtze:masterfrom Jun 18, 2025
Merged
Conversation
The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on WinXP, although it requires more attempts to cause it. The hang in that case is also resolved by forcing PIO. It doesn't appear that VIA has produced any drivers for that OS, thus no known workaround exists. HDDs attached to the controller do not suffer from any DMA issues. Cc: stable@vger.kernel.org Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916677 Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085508.1398701-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices have not yet been enabled by the first time ata_acpi_cbl_80wire() is called. This means that the ata_for_each_dev loop is never entered, and a 40 wire cable is assumed. The VIA controller on this board does not report the cable in the PCI config space, thus having to fall back to ACPI even though no SATA bridge is present. The _GTM values are correctly reported by the firmware through ACPI, which has already set up faster transfer modes, but due to the above the controller is forced down to a maximum of UDMA/33. Resolve this by modifying ata_acpi_cbl_80wire() to directly return the cable type. First, an unknown cable is assumed which preserves the mode set by the firmware, and then on subsequent calls when the devices have been enabled, an 80 wire cable is correctly detected. Since the function now directly returns the cable type, it is renamed to ata_acpi_cbl_pata_type(). Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it doesn't indicate building on real X86 machines. There's no MSR on UML though, so add a check for CONFIG_X86. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20250606090110.15784-2-johannes@sipsolutions.net Signed-off-by: Niklas Cassel <cassel@kernel.org>
pci_request_regions() became a managed devres functions if the PCI device was enabled with pcim_enable_device(), which is the case for pata_macio. The PCI subsystem recently removed this hybrid feature from pci_request_region(). When doing so, pata_macio was forgotten to be ported to use pcim_request_all_regions(). If that function is not used, pata_macio will fail on driver-reload because the PCI regions will remain blocked. Fix the region leak by replacing pci_request_regions() with its managed counterpart, pcim_request_all_regions(). Fixes: 51f6aec ("PCI: Remove hybrid devres nature from request functions") Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250610135413.35930-2-phasta@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Fix the TODO in ahci_broken_lpm() by using the proper BIOS build date. The proper BIOS build date was provided by Hans, see Link. Link: https://lore.kernel.org/linux-ide/6ea509c8-b38d-4941-8a29-c1117ff3dd5b@redhat.com/ Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250610110757.1318959-6-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Use sched-ext@lists.linux.dev instead of LKML. Signed-off-by: Tejun Heo <tj@kernel.org>
A user has bisected a regression which causes graphical corruptions on his screen to commit 7627a0e ("ata: ahci: Drop low power policy board type"). Simply reverting commit 7627a0e ("ata: ahci: Drop low power policy board type") makes the graphical corruptions on his screen to go away. (Note: there are no visible messages in dmesg that indicates a problem with AHCI.) The user also reports that the problem occurs regardless if there is an HDD or an SSD connected via AHCI, so the problem is not device related. The devices also work fine on other motherboards, so it seems specific to the ASUSPRO-D840SA motherboard. While enabling low power modes for AHCI is not supposed to affect completely unrelated hardware, like a graphics card, it does however allow the system to enter deeper PC-states, which could expose ACPI issues that were previously not visible (because the system never entered these lower power states before). There are previous examples where enabling LPM exposed serious BIOS/ACPI bugs, see e.g. commit 240630e ("ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS"). Since there hasn't been any BIOS update in years for the ASUSPRO-D840SA motherboard, disable LPM for this board, in order to avoid entering lower PC-states, which triggers graphical corruptions. Cc: stable@vger.kernel.org Reported-by: Andy Yang <andyybtc79@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220111 Fixes: 7627a0e ("ata: ahci: Drop low power policy board type") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250612141750.2108342-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org>
Annotate various keys, ivs, and other byte arrays with __nonstring so
that static initializers will not complain about truncating the trailing
NUL byte under GCC 15 with -Wunterminated-string-initialization enabled.
Silences many warnings like:
../lib/crypto/aesgcm.c:642:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (13 chars into 12 available) [-Wunterminated-string-initialization]
642 | .iv = "\xca\xfe\xba\xbe\xfa\xce\xdb\xad"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529173113.work.760-kees@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
After commit 6f110a5 ("Disable SLUB_TINY for build testing"), which causes CONFIG_KASAN to be enabled in allmodconfig again, arm64 allmodconfig builds with clang-17 and older show an instance of -Wframe-larger-than (which breaks the build with CONFIG_WERROR=y): lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than] 757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE], | ^ When KASAN is disabled, the stack usage is roughly quartered: lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than] 757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE], | ^ Using '-Rpass-analysis=stack-frame-layout' shows the following variables and many, many 8-byte spills when KASAN is enabled: Offset: [SP-144], Type: Variable, Align: 8, Size: 40 Offset: [SP-464], Type: Variable, Align: 8, Size: 320 Offset: [SP-784], Type: Variable, Align: 8, Size: 320 Offset: [SP-864], Type: Variable, Align: 32, Size: 80 Offset: [SP-896], Type: Variable, Align: 32, Size: 32 Offset: [SP-1016], Type: Variable, Align: 8, Size: 120 When KASAN is disabled, there are still spills but not at many and the variables list is smaller: Offset: [SP-192], Type: Variable, Align: 32, Size: 80 Offset: [SP-224], Type: Variable, Align: 32, Size: 32 Offset: [SP-344], Type: Variable, Align: 8, Size: 120 Disable KASAN for this file when using clang-17 or older to avoid blowing out the stack, clearing up the warning. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
For some reason arm64's Poly1305 code got changed to ignore the padbit argument. As a result, the output is incorrect when the message length is not a multiple of 16 (which is not reached with the standard ChaCha20Poly1305, but bcachefs could reach this). Fix this. Fixes: a59e546 ("crypto: arm64/poly1305 - Add block-only interface") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Tested-by: Kent Overstreet <kent.overstreet@linux.dev> Link: https://lore.kernel.org/r/20250616010654.367302-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
We should count the terminating NUL byte as part of the ctx_len. Otherwise, UBSAN logs a warning: UBSAN: array-index-out-of-bounds in security/selinux/xfrm.c:99:14 index 60 is out of range for type 'char [*]' The allocation itself is correct so there is no actual out of bounds indexing, just a warning. Cc: stable@vger.kernel.org Suggested-by: Christian Göttsche <cgzones@googlemail.com> Link: https://lore.kernel.org/selinux/CAEjxPJ6tA5+LxsGfOJokzdPeRomBHjKLBVR6zbrg+_w3ZZbM3A@mail.gmail.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Asus ROG STRIX B550-F GAMING (WI-FI) motherboard has problems on some SATA ports with at least one hard drive model (WDC WD20EFAX-68FB5N0) when LPM is enabled. Disabling LPM solves the issue. Cc: stable@vger.kernel.org Fixes: 7627a0e ("ata: ahci: Drop low power policy board type") Signed-off-by: Mikko Korhonen <mjkorhon@gmail.com> Link: https://lore.kernel.org/r/20250617062055.784827-1-mjkorhon@gmail.com [cassel: more detailed comment, make single line comments consistent] Signed-off-by: Niklas Cassel <cassel@kernel.org>
Otherwise, tg->scx.weight can go out of sync while scx_cgroup is not enabled and ops.cgroup_init() may be called with a stale weight value. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 8195136 ("sched_ext: Add cgroup support") Cc: stable@vger.kernel.org # v6.12+
…from sched_create_group() During task_group creation, sched_create_group() calls scx_group_set_weight() with CGROUP_WEIGHT_DFL to initialize the sched_ext portion. This is premature and ends up calling ops.cgroup_set_weight() with an incorrect @CGRP before ops.cgroup_init() is called. sched_create_group() should just initialize SCX related fields in the new task_group. Fix it by factoring out scx_tg_init() from sched_init() and making sched_create_group() call that function instead of scx_group_set_weight(). v2: Retain CONFIG_EXT_GROUP_SCHED ifdef in sched_init() as removing it leads to build failures on !CONFIG_GROUP_SCHED configs. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 8195136 ("sched_ext: Add cgroup support") Cc: stable@vger.kernel.org # v6.12+
Now when isolcpus is enabled via the cmdline, wq_isolated_cpumask does not include these isolated CPUs, even wq_unbound_cpumask has already excluded them. It is only when we successfully configure an isolate cpuset partition that wq_isolated_cpumask gets overwritten by workqueue_unbound_exclude_cpumask(), including both the cmdline-specified isolated CPUs and the isolated CPUs within the cpuset partitions. Fix this issue by initializing wq_isolated_cpumask properly in workqueue_init_early(). Fixes: fe28f63 ("workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask") Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
When setting the funcgraph-args option when function graph tracer is net
enabled, it incorrectly enables it. Worse, it unregisters itself when it
was never registered. Then when it gets enabled again, it will register
itself a second time causing a WARNing.
~# echo 1 > /sys/kernel/tracing/options/funcgraph-args
~# head -20 /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 813/26317372 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8);
<idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) {
<idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) {
<idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1);
<idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320);
<idle>-0 [007] d..4. 358.966019: 7) 5.824 us | }
<idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
<idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
Notice the "tracer: nop" at the top there. The current tracer is the "nop"
tracer, but the content is obviously the function graph tracer.
Enabling function graph tracing will cause it to register again and
trigger a warning in the accounting:
~# echo function_graph > /sys/kernel/tracing/current_tracer
-bash: echo: write error: Device or resource busy
With the dmesg of:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ftrace_startup_subops+0xc1e/0x1000
Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9
RSP: 0018:ffff888133cff948 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000
RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140
RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221
R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0
R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100
FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ftrace_startup_subops+0x10/0x10
? find_held_lock+0x2b/0x80
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? trace_preempt_on+0xd0/0x110
? __pfx_trace_graph_entry_args+0x10/0x10
register_ftrace_graph+0x4d2/0x1020
? tracing_reset_online_cpus+0x14b/0x1e0
? __pfx_register_ftrace_graph+0x10/0x10
? ring_buffer_record_enable+0x16/0x20
? tracing_reset_online_cpus+0x153/0x1e0
? __pfx_tracing_reset_online_cpus+0x10/0x10
? __pfx_trace_graph_return+0x10/0x10
graph_trace_init+0xfd/0x160
tracing_set_tracer+0x500/0xa80
? __pfx_tracing_set_tracer+0x10/0x10
? lock_release+0x181/0x2d0
? _copy_from_user+0x26/0xa0
tracing_set_trace_write+0x132/0x1e0
? __pfx_tracing_set_trace_write+0x10/0x10
? ftrace_graph_func+0xcc/0x140
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
vfs_write+0x1d0/0xe90
? __pfx_vfs_write+0x10/0x10
Have the setting of the funcgraph-args check if function_graph tracer is
the current tracer of the instance, and if not, do nothing, as there's
nothing to do (the option is checked when function_graph tracing starts).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250618073801.057ea636@gandalf.local.home
Fixes: c7a60a7 ("ftrace: Have funcgraph-args take affect during tracing")
Closes: https://lore.kernel.org/all/4ab1a7bdd0174ab09c7b0d68cdbff9a4@huawei.com/
Reported-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
…/git/libata/linux Pull ata fixes from Niklas Cassel: - Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks up on ATAPI DMA (Tasos) - Fix ACPI PATA cable type detection such that the controller is not forced down to a slow transfer mode (Tasos) - Fix build error on 32-bit UML (Johannes) - Fix a PCI region leak in the pata_macio driver so that the driver no longer fails to load after rmmod (Philipp) - Use correct DMI BIOS build date for ThinkPad W541 quirk (me) - Disallow LPM for ASUSPRO-D840SA motherboard as this board interestingly enough gets graphical corruptions on the iGPU when LPM is enabled (me) - Disallow LPM for Asus B550-F motherboard as this board will get command timeouts on ports 5 and 6, yet LPM with the same drive works fine on all other ports (Mikko) * tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: ahci: Disallow LPM for Asus B550-F motherboard ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk ata: pata_macio: Fix PCI region leak ata: pata_cs5536: fix build on 32-bit UML ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
…rnel/git/trace/linux-trace Pull ftrace fix from Steven Rostedt: - Do not blindly enable function_graph tracer when updating funcgraph-args When the option to trace function arguments in the function graph trace is updated, it requires the function graph tracer to switch its callback routine. It disables function graph tracing, updates the callback and then re-enables function graph tracing. The issue is that it doesn't check if function graph tracing is currently enabled or not. If it is not enabled, it will try to disable it and re-enable it (which will actually enable it even though it is not the current tracer). This causes an issue in the accounting and will trigger a WARN_ON() if the function tracer is enabled after that. * tag 'ftrace-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: fgraph: Do not enable function_graph tracer when setting funcgraph-args
…/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "A small SELinux patch to resolve a UBSAN warning in the xfrm/labeled-IPsec code" * tag 'selinux-pr-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len
An issue was found: # cd /sys/fs/cgroup/freezer/ # mkdir test # echo FROZEN > test/freezer.state # cat test/freezer.state FROZEN # sleep 1000 & [1] 863 # echo 863 > test/cgroup.procs # cat test/freezer.state FREEZING When tasks are migrated to a frozen cgroup, the freezer fails to immediately freeze the tasks, causing the cgroup to remain in the "FREEZING". The freeze_task() function is called before clearing the CGROUP_FROZEN flag. This causes the freezing() check to incorrectly return false, preventing __freeze_task() from being invoked for the migrated task. To fix this issue, clear the CGROUP_FROZEN state before calling freeze_task(). Fixes: f5d39b0 ("freezer,sched: Rewrite core freezer logic") Cc: stable@vger.kernel.org # v6.1+ Reported-by: Zhong Jiawei <zhongjiawei1@huawei.com> Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
…/kernel/git/ebiggers/linux Pull crypto library fixes from Eric Biggers: - Fix a regression in the arm64 Poly1305 code - Fix a couple compiler warnings * tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crypto/poly1305: Fix arm64's poly1305_blocks_arch() lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older lib/crypto: Annotate crypto strings with nonstring
…scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Fix a couple bugs in cgroup cpu.weight support - Add the new sched-ext@lists.linux.dev to MAINTAINERS * tag 'sched_ext-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext, sched/core: Don't call scx_group_set_weight() prematurely from sched_create_group() sched_ext: Make scx_group_set_weight() always update tg->scx.weight sched_ext: Update mailing list entry in MAINTAINERS
…ux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: - Fix missed early init of wq_isolated_cpumask * tag 'wq-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Initialize wq_isolated_cpumask in workqueue_init_early()
…/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: - In cgroup1 freezer, a task migrating into a frozen cgroup might not get frozen immediately due to the wrong operation order. Fix it. * tag 'cgroup-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup,freezer: fix incomplete freezing when attaching tasks
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
12 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot] (v2.0.0-alpha.1)
Can you help keep this open source service alive? 💖 Please sponsor : )